When I perform a split audio edit, the timeline doesn't show it when the clips are collapsed!

Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
Thanks

libovh wrote:
Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
Thanks
Like Zambonisurfer suggested, this is so by design.

Similar Messages

Hi guys, I've been given some .mov files to use. When I play them I can hear the audio but the pictures are green. The client says they play for him. I am on mac 10.5.8 and FCP 6.0.6. Any clues as to why this is happening?

Hi guys,
I've been given some .mov files to use on FCP.
When I play them I can hear the audio but the pictures are green. The client says they play for him.
I am on mac 10.5.8 and FCP 6.0.6.
The files details are the same as a file that will play.
Apple Mpeg IMX 625/50
(50 Mbs)
720 x 576 millions
16-bit Integer (Little Edition)
I've been told this happened to somebody else last week, but didn't get a resaon why.
Any clues as to why this is happening? I suspect it's a codec issue of some sort
Cheers,
G

FC 6 supports 29.97 & 25 IMX frame rates but a third party plug-in is required:
http://manuals.info.apple.com/en_US/FCP6_HD_and_Broadcast_Formats.pdf
This plug-in costs $100
http://www.nanocosmos.de/v4/en/products/quicktimeIMX.html
This software is cheaper at $30 and will let you test drive it for free
http://www.pavtube.com/guide/working-with-xdcam-imx-media-in-fcp-avid-imovie-ppr o.html
There may be a free option available but I'm not aware of it.

When downloading from my PD 150 to the event window in my iMac the clips are out of order and split into many subclips ac iMac the clips in the

when downloading from my PD 150 to the event window in my iMovie the clips are out of order and split into many subclips. Very frustrating

Nevermind, somehow it's magically back in order.

Confused why my video exports at 640x480 when all the clips are 1280x720

All of my clips are from a canon 7d shot at 1280 60fps mostly surfing so I can slow it down. I added one clip which is at 640 to the project and when I exported the project in H.264 or any other setting it is only at 640. So I went back removed the clip and tryed to export again and it still only does 640 even though all the clips are now at 1280. I would hate to have to edit all over again. Thanks for any help.

Thanks I realized I can click the wrench at the bottum right of the inspector box and change the properties back to 1280 so that helped but I couldn't change the FPS they are stuck on 30 not the end of the world. I think I must have accidently put a 640 clip as the first clip when I dropped into the timeline and even though I deleted it, it kept everything at that setting . It would be nice if you could change the properties after the fact.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right

16:9 Aspect Ratio reverts to 4:3 when rejected clips are moved to trash.

Mini DV Tape imported to an event with Aspect Ratio Preference set to 16:9. Parts of some clips marked as rejected. When rejected clips are moved to trash the aspect ratio of both the Event and the Project revert to 4:3.

This has always worked for me:
FCP: File Export QTMovie... current settings.
COMPRESSOR: 16:9 High Quality 90 minute (choose ac3 for your audio in here)
Then, in DVDSP make sure the setting is correct in the above window.
Also - check your preview (forgot what it's called)you can change it to widescreen also. Dbl check there that indeed all is good.
Then, as said above also - run it on DVDPlayer in your applications folder. Don't watch it FULL screen, watch it as a window in your finder. There you'll get a read on EXACTLY what the dvd is sending... if you see a 4:3 window with letterboxing something is wrong. You should (SHOULD) see a 16:9 window with no distortion or letterboxing.
Once you determine that, the issue will be your setup of DVD player and TV.
CaptM

Can I copy clips from one project to another? The clips are still frames captured within a video event.

Can I copy clips from one project to another? The clips are frames saved as stills from a video event. I try the copy & paste but it does not seem to work.

The video was converted into MP4 and then I could get it into iMovie events. I had right clicked and saved farmes as stills. ABout 50 of them, When I tried to copy and paste those stills into another project I couldn't. They came up blank.
I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them. So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it. (This is for a 1961 Class Reunion, so it's old stuff). Seems to work so far.
So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else. Do you know a way around this?

I have MTS files imported from a Canon HD cam. They import into I movie and I see them in the Finder folders and they preview fine. I have a new project and some of the clips are freezing and some audio is now gone? Do i need a file converter and convert

I have MTS video files that import from a Canon Vixia HF S20 HD camera. I imported into I Movie. They converted into MOV files and I see them in the movies folder in finder. They view fine and run through the events folder in Finder. In I Movie, I created a new project and used a "Theme". The project worked fine at first but then some clips started to freeze and some lost audio. The effected clips are the same in the project library and in the event library, meaning they are froze in both places. As I said when i view through finder the MOV files preview and work fine. Is this inherent to MTS files using in I movie. SHould i consider using a file converter to convert to MOV files prior to importing into I movie.
I found on Apple support site info that states the MTS files can only be imported through the camera. I am developing my back up procedures and now I am faced with backing up in the original MTS files but not being able to reload if necessary into I movie. Any suggestions?

I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

Nested ItemsControls' binding breaks when underlying data source changes, and the ItemsControls are collapsed

Windows Phone WinRT App, targeted to Windows Phone 8.1.
I have a nested data structure: class (SampleDataSource), that has an ObservableCollection (Groups) that contains class (SampleDataGroup) items that has an ObservableCollection (Items)
that contains class (SampleDataItem) items.
SampleDataSource is the DataContext of root item, a pivot control's ItemsSource is set to
Groups. In the pivot's DataTemplate there is an ItemsControl with ItemsSource set to
Items.
The above scenario is a slightly modified version of the pivot app template that is generated by Visual Studio.
So far it works properly.
Then I added a ToggleSwitch to the page that toggles the Visibility of the pivot.
Still works.
Then I added some more code to clear the Groups ObservableCollection when the pivot made collapsed, and reload the data before its visibility is set back to visible.
The result is that the top-level ItemsControl (the pivot) gets displayed properly, but the ItemsControl is empty. If I scroll to an other pivot page, the ItemsControl is populated, and from this point everything works correctly, even the initially empty
ItemsControl works just fine.
The code that is relevant to the issue is:
private async void ToggleVisibility_Toggled(object sender, RoutedEventArgs e)
if (pivot != null)
// Was collapsed, therefore we are going to show it, so load the data source
if (pivot.Visibility == Windows.UI.Xaml.Visibility.Collapsed)
await SampleDataSource.GetInstance().GetSampleDataAsync();
pivot.Visibility = (sender as ToggleSwitch).IsOn ? Visibility.Visible : Visibility.Collapsed;
// Just got collapsed, so remove the data from memory
if (pivot.Visibility == Windows.UI.Xaml.Visibility.Collapsed)
SampleDataSource.GetInstance().Groups.Clear();
The project (as mentioned above, it's a slightly modified version of Pivot App template) that reproduces this issue is available
HERE.
Does anyone have any idea what I should do to make ItemsControl work properly after making pivot visible?

I can't help you with this myself as I've not done it but there are quite a few tutorials kicking around the net.
Simple ODBC Connections in Adobe LiveCycle:
http://www.youtube.com/watch?v=C56_Cz-aE0c
Connecting a form to a database:
http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/
Database connected forms:
http://acrobatusers.com/tutorials/database-connected-forms

HT2479 I recently updated the iMovie app and now all my events are missing from the event library, although they seem to be on the external hard drive...how do I restore all the clips (I have begun to edit the clips down) I am a recent PC convert, thanks

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

I just updated the imovie app and all the clips from the event library are now missing, although they seem to be on the external hard drive...I am a new mac user, so please help...thanks...

Can I do picture in picture when both clips are in a project?

I want to do picture in picture, but the clip I want as the inserted video needs to be edited first so I can't just take it from the event and drag it onto the other clip in a project. If I edit it within the project, it looks like I cannot then use it for picture in picture. What am I missing?

What you are describing can be done rather easily using FInal Cut Pro X, a $300 tool. But FCPX has a steep learning curve and is expensive, so is there a way to do it using a $15 app?
Yes, there is a way.
1) Edit your picture in picture sequence in a new project. Get it just like you like it.
2) Use SHARE/EXPORT USING QUICKTIME. Choose "Movie to QuickTIme Movie" and click options. Choose Apple Intermediate Codec for the compression under Video Options. Give it a name and save it where you can find it.
3) Now, in iMovie, click FILE/IMPORT MOVIE and import the movie you just made into your Event.
4) You can now drag it in to the original project as a Picture in Picture.

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

My transitions are distorting my clips when the clips are stabilized.

I stablized every clip in my storyboard (timeline), and whenever I add transitions it jumps in and out of stabilization. What do I do?
Final Cut Pro X

I tried that: I shortened the end of the outgoing clip and lengthened the beginning of the incoming clip, so that a centered cross dissolve occupies the same space:
The problem still persists. For this particular transition, the transition shows a frozen frame from the incoming clip, instead of a portion of the video like mentioned above.
I have also tried deleting the render files for the transition; no luck. Could it be some sort of bug or glitch in the program?
Cameron

After the most recent iOS update, notification center doesn't show messages from people who are on "do not disturb mode". Anyone know how to fix it?

Originally, even if I had some messages on the "do not disturb" mode, I would still be able to preview them in the notification center. After the latest update about a week or so ago, the only messages that appear are the ones that aren't on "do not disturb". I've tried taking them all off the DND mode and turning it back on, messed with the settings, even turned my phone off and on, but nothing is working.
Any ideas?

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Export setting when mp4 clips are in timeline

I have a movie montague of different clips, including mp4 clips.. When I export, no matter what format I export in it makes the final movie all jittery, iall of the mp4 clips do not play properly, what format do I export in to make it play smoothly?

If your mp4 files are interlaced, and you output has a different field order, it will make the output jittery.
Check the mp4 field order, it should have one of three possible values: progressive (if it's this, there is some other problem), upper field first, and lower field first.
Whatever it is, see if it matches the output (which will also have one of those three field orders).
If they are both progressive, let me know and we can figure out other solutions.

When I perform a split audio edit, the timeline doesn't show it when the clips are collapsed!

Similar Messages

Maybe you are looking for