When I plug headphones into my iPhone, I only heard sound on one side. This is a recent phenom. Is this fixable?
It seems like an electronic problem, since for a while I could jiggle the plug and still get stereo sound. Is this easily fixable for an iPhone3?
You will need to get the headphone jack replaced.
Similar Messages
-
When I Plug My headphones into my iPhone 4g only one will work
When I plug my headphones into my iPhone 4 only one of the headphones will work, how do i fix this?
Could be the headphones... Do you have another set of headphones you can try...
See Here for...
TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
http://support.apple.com/kb/TS1630 -
When i plug headphones into my 4s theres no sound whats wrong
When i plug headphones into my 4s no sound comes out whats wrong?
You've firmly inserted the headphones into the iPad ? The socket can be quite a tight fit.
-
I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever
Hi Gammer576775!
Here is an article that will help you troubleshoot this issue with your iPod touch:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/ts2771
Will not power on, or will not turn on unless connected to power
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if the display turns on and…
The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I am running Windows & on an HP. not sure of the model number. But the sound system is IDT. It worked fine up until about a year ago. And now whenever you plug headphones in, the speakers do not turn off, but yet the headphones still work. any solutions?
When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
so recently i wanted to load my friends music onto my phone because my laptop broke and i had no other way to get my music. i loged out of my itunes so the music could load without any problems. i tryed to so an update on the softwear today and my phone says i need to conncect to itunes, but when i try the only option is to restore it! that would mean all my things on my phone GONE. please help i cant live without a phone for long but i dont want to have to restore it. pleaseee please tell me somone can help.
The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way. -
I've just got my mams old iPhone 4 but it won't connect to my iTunes or anything? The USB cable works and so do the ports, I've tried reinstalling iTunes but that didn't work! An anyone help me?
Hi there Jasmine1243,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W. -
My overall speakers work but when I plug them into my iPod, there is no sound
How do you fix this?
What do you mean by "my overall speakers?
How do yu plug them in to your iPod?
Did they work before? -
my 160gb ipod just deleted its whole contents and keeps error-ing when i try to upload more songs to it! is there some way i can get them back, i dont have 2/3 of them stored as backup! hellpppppp!?!
You may not have a backup of those files, then. Have you checked for backup according to this knowledge base article:
http://support.apple.com/kb/PH1779 -
My iPhone4 will not come on. When i plug it into the charger, it only says connect to iTunes. When I tried restoring it, it said my iPhone4 could not be restored.
Try this
http://support.apple.com/kb/HT1808 -
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?
Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.
-
My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help
Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario -
my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks
http://support.apple.com/kb/HT1808
You can't not restore if you have reached this point -
My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
Maybe you are looking for
-
Table in Schema1 using XMLIndexes But not in View- Schema2
Hi, We are using : Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit I have a view with following query: CREATE OR REPLACE FORCE VIEW VIEW_TNAME XML AS SELECT Column_Name FROM TNAME WHERE XMLEXISTS ( 'declare namespace Namesp1 ="Abc:S
-
Po is not picking up current exchange rate
hi, in our import po system is not picking up current updated exchange rate.do u have any idea where the problem may be. from where does import po picks up exchange rate? thanks
-
Anybody using the Content Management Event Framework (CMEF) from portal to invoke a BPEL process? I'm only interested in ADD_ITEM events in the queue, and since CMEF seems to put all events in the queue by default, I'd like to filter events to only g
-
HDV 30p export from FCP to Motion doesn't work
Hello all, I have a sequence in FCP HDV 30P. Every time I am trying to export it to motion, FCP gets completely stuck to the point of force quit. How can I open the sequence in Motion? Thanks for your help. K
-
Word document templates and Protection
We have implemented a Portal Solution for Sales Representatives, we allow them to create word documents by using a template, Once the template is filled by the data in the application we call the Execute Macro Method so that the Macro used to protect