When I plug in card reader it shows the device in finder.
Yes, when I plug the card reader into USB the device shows up in Finder and iPhoto. But nothing happens.
Yes, when I plug the card reader into USB the device shows up in Finder and iPhoto. But nothing happens.
Which version of iPhoto are you using?
In iPhoto '11: Look for your camera’s icon in the Source list in the sidebar. If the icon is there, click it. iPhoto should open in import view, and you can select the photos to import.
See this help page: http://help.apple.com/iphoto/index.html#pht6c803201
Similar Messages
-
my memory card is not showing up on the home screen when i plug it in but it shows the computer found it in system preferences. when i plugged these into a imac back in school it showed up how come its not showing up on my less then 24hr old mac. sorry beginner mac user
Finder > Finder Menu > Finder Preferences (these are not in System Preferences)
The General pane has checkboxes for various devices to show on the Desktop. A memory card is considered an external drive. If you want to see it on the Desktop when it mounts, check the external drives checkbox. -
I have an old IMac with 10.4.11 & the most uptodate Itunes it allows me to download (this isnt the most uptodate as u'd imagine) I now have new Iphone 5 i want to add my itunes songs etc to but when i plug it in it doesnt register the device. Any advice?
Printed on the side of the box your phone came in:
Requirements to sync with a Mac:
OSX 10.6.8 or higher & iTunes 10.7 or higher.
You need to update your computer, if you can or purchase a new computer, if you want to use your phone with your computer. -
Hi!
I purchased my AppleTV in Miami, but I live in Argentina.
I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
On the other hand, I cannot return it or exchange it, since I bought it in the states.
Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
Please!!! I am being driven up the walls here.... HELP!!Try this:
Change the Apple TV resolution:
Press and hold the Menu and Up button on your Apple Remote for six seconds.
The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution. -
X61 - SD Card Reader - (Code 10 - the device cannot start)
Hi.
One of our users in RTX Telecom Denmark have a problem with his X61.
Everytime he insert a SD card to the reader it comes with this error message:
Code 10 - the device cannot start.
We have tried all the Windows hotfixes, reinstalling the drivers from:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67971
restarting the machine, but nothing helps.
Do you know anything about this issue.
Thanks in advance.
Best regards,
RTX Telecom A/S
Jesper Breum Larsen
Trainee
Stroemmen 6
DK-9400 Noerresundby
Web: www.rtx.dk
Message Edited by RTX-IT on 02-13-2009 09:20 AMI have now tried with the preload without any luck. Or that is not completly true, I could put a 1 gB Kingston card in the computer and it would pop up. But it also freezed the computer from time to time.
If I took the card again after a freeze, the computer went back to normal.
But out of 6 SD cards, that was the only one I managed to get working.
I tried all kind of sizes:
64 mb (no luck)
512 mb (no luck)
1 gb (kinda worked - sometimes freeze)
2 gb (no luck)
4 gb (no luck)
8 gb (no luck)
So now I have called Lenovo support and they will come and fix it for me. -
When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!
- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod. -
Smart Card Reader not showing correct certificates?
Running 10.5.6 with an SCR331, G4 desktop. I have been using entourage, smart card reader, and CAC successfully for quite some time.
My CAC was recently updated with new certificates. When I insert my card reader with CAC into my machine, the keychain (and Entourage) show the old certificates which aren't even on my CAC anymore. Obviously I can't get Entourage (or other websites) to work without being able to access the new certs.
I verified the CAC & reader were good by looking at it using a windows XP machine. The three new certificates were there.
I also used another Mac (lap top) to verify the certs. I inserted my reader into the lap top, and the keychain on that machine displayed the correct certificates.
I have tried several methods of rebuilding/replacing my keychain without success. Is there another token that needs to be cleared? Any help in letting access the new certificates would be very much appreciated.
Thanks,
BobIf you did what a lot of people did you put your certs locally and you do not need to do this. Delete them from your keychain and just in cert your CAC. Then create a "IDPref" for the DoD site you are trying to access and you should be good to go. If you need help, I have written a good "How-to" on my webblog. Just do a search for "safari and CAC".
Jonathan
<Edited by Host> -
When I plug my ipod into my computer the computer dosnt read it and I get a messege saying that the device is drawing to much power. How do I solve this problem???
I had the same problem with mine when I connect the ipod when it's full charged and turn on. The problem never happen when the ipod is charging or i'ts full charged and it's turn off. So just turn off your ipod down and connect to your mac again.
-
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
my iphone has a usb cable with a itunes symbol and when i plug into computer it wont show up on itunes
Well, you don't say what computer OS you are using, so here is information on both.
Windows: http://support.apple.com/kb/TS1538
Mac OSX: http://support.apple.com/kb/TS1591 -
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
When i plug in my Iphone it makes the noise and charges, but wont bring it up in itunes. Instead it brings up my iphone in a file under my documents... Any help..??
Syncing shouldn't trouch you photos unless you have photos in a Photo Library album. These would be photos that were synced to your phone from your computer. If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically". Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141. To follow the steps, first open iTunes and go to View>Show Sidebar. Also, Transfer Purchases is now located in File>Devices. -
When I plug in my iPhone 5s with the new 7.1 to my laptop it says "this feature may not be supported"
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
I used an iTunes card and it shows the full balance available, but is still charging my credit card. Why is this?
I had the same error when trying to update my apps on my ipod touch. I tried to input my security code numerous times to no avail. I also made sure my billing address was the same as what my bank had on file. To fix the issue I went into iTunes, logged onto the iTunes store, went to account settings and reviewed my recent purchases. Turned out that I had made a recent purchase and didn't have enough money left on my credit card to pay for it at the time. I paid off the credit card, and then input my security code once more and now it works fine. I've heard that some debit or pay as you go credit cards require a minimum balance, so make sure you have at least that amount in your account.
-
So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?
Ok, sorry. And yes, I just restored my iPhone as new and tried to put all the songs on there before I even restored with my previous backup, but it still does the same thing... even when I just checked the option to sync only "selected music or videos". How's that possible?
P.S. After I tried syncing with checked songs only, nothing showed up under Music on my phone and this message popped up in iTunes: "The iPhone "..." could not be synced because the sync session failed to finish." If you could, please tell me what that means, thanks.
Maybe you are looking for
-
Sample value accuracy in sample editor
My setup is a motu 2408mk3 into Logic Pro 6 on my G4 mac. When I open a 24 bit aiff file in the sample editor and set the sample editor to view samples on the vertical axis, it only shows a max sample value of 32767. This is the max value of 16 bit d
-
Curve 8530 Will not come on....
Blackberry curve went off, Attempted to turn back on and all i get is the loading screen and then it sits on my service provider logo... took battery out for a day and put back in and the same thing happens...can someone please help>????
-
How to transfer a data to an excel file
I would like to know on how to transfer the result from Java to excel file. Is there any exact codes?
-
Hi, I need to make a JSF application running in an Application Server 10.1.3. Users of this application must be the same users of an e-business suite 11.5.10 installation. Does the e-business suite come with an OID? Is there a way to connect to this
-
Hi All ! I am trying to load images onto a canvas using url source. The images loaded are forming a map , so its important that every image will be exactly in the wright place. The problem is that sometimes an image is not loaded , and I get error 50