When I plug in IPad with USB to my computer and ITune I get this error mesage; ITune could not connect to this IPhone. An unknown error occurred (0xE8000084
Windows 7 Pro
When I plug in IPad USB to computer and ITune I get this error message; Itune could not connect to this IPhone. An unknown error occurred (0xE8000084.
Have you tried the troubleshooting on this page : iOS: Unknown error containing '0xE' when connecting to a Windows PC ?
Similar Messages
-
itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?
http://support.apple.com/kb/ts3221
-
I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same account. What can I do?
This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743 -
When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes. iPad will not charge. Restarted iMac and rebooted iPad and no difference.
Hi GJ374,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari -
When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)
Let's try the following document with that one:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC -
when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
When i try to connect my iphone to itunes it comes up with a message saying "itunes could not connect to this iphone, an unknown error has occured (0xE8000012)
i have recently bought new laptop and downloaded/installed the newest itunes and this has happened.. any ideas?read
Error -50
Delete Storm Video, QuickTime, iTunes, then reinstall iTunes. See also KB TS1583for error -50 -
when i plug in my iphone 5 to my macbook pro it says itunes could not connect to this phone. could not allocate a resource
Your iTunes updated?
-
I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
appreciatedPlace the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Forget iPhone password, when connect to computer "iTunes could not connect to the iPhone because it is locked with a pass code. You must enter pass code on the iPhone before it can be used with iTunes."
You have to restore it using a computer with iTunes per the knowledge base article above.
With iOS 7, if you have Find My Phone turned on you can login to iCloud from a computer and send an erase signal to the iPhone to clear it...that will erase all content and settings. -
My ipad 2 will not work. I tried to reset it many times. Nothing. I plugged it into my computer and followed directions so itunes would show up. Tried to restore (bummer to lose everything!) The ipad could not be restored due to an unknown error (code 9). Any help?
Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311 -
when i try and open itunes a memo pops up saying "itunes could not connect to this iPhone. This device is no longer connected" my iphone is not plugged into my mac so i dont know why its mentioning an iphone nor why i cant open my itunes library?
Each time you connect your iPhone to iTunes, you need to eject it before closing iTunes by clicking on the little "eject" icon shown in iTunes. It seems that sometime in the past, you did not do that.
I'm not sure how to undo the previously done damage, but maybe a reboot of your Mac would help. -
The pop up that comes up as soon as i plug my iphone into my mac is 'itunes could not connect to this iphone. could not allocate resource" what should i do?
HOW TO FIX CANNOT ALLOCATE A RESOURCE ERROR!!!
I found a fix that worked for me after failing with all the others:
IF your computer has an old cydia app called Wi-Fi Sync (you'll recognize it on your toolbar as a black silhouette of an iphone that NEVER goes away), then this is probably your main culprit. Simple fix.
1. Goto your hard drive in the finder
2. Goto Library
3. Goto Launch Daemons
4. Throw this in the trash: com.ghughes.wifisync.root.plist
5. Goto Library
6. Goto Application Support
7. Throw this in the trash: Wi-Fi Sync (it's an entire folder).
8. Restart.
9. Thank me.
Peace and Love, Peace and LOVE! -
Can anyone help me? My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off. When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone. An unknown error occurred OxE8000084. Can anyone help me correct this so I can start using my phone again.
Thank youhttp://support.apple.com/kb/TS3221
-
when connect my ipad a my rmbp 15" appears this message "iTunes could not connect to this iPhone. This device is no longer connected." and ipad is connected and disconnected all the time. but when connect the Ipad in my rmbp 13" not have a problem.
Please I need help. i hope not to have another disappointment with apple product.iTunes could not connect to this iPhone. This device is no longer connected.
iPad 2 7.1.2
iTunes 11.3 (54)
iMac 27 in 10.9.4
Follow these steps to resolve your issue for iPads
Troubleshooting time is about 30 minutes - 1 hour
Step 1
Unplug the usb 2.0 cord from the 27 in iMac and iPad 2 64 GB (or what ever version you have) Power down the iPad
Step 2
Select your HD (Hard Drive) ( I did this form my desk top)
Next select the applications folder, Next right click the iTunes icon and select show package contents, select Contents.
1. Next select info.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
2. Next select pkginfo, right click and select move to trash. (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
3. Next Select version.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
4. Remove "iTunes" from your dock
5. From the Finder, choose Go > Go to folder.
6. Type the following and then press Return: /var/db/lockdown
7. Choose View > as Icons.
8. The Finder window should display one or more files with long alphanumeric file names.
9. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted. Note: Do not delete the Lockdown folder itself.
Delete only the files contained inside the Lockdown folder.
Step 3
Follow the below steps to troubleshoot the issue.
1. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
2. Click Go.
3. Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.) If you DO NOT HAVE file "com.apple.usbmuxd.plist~orig" I DELETED THE FOLLOWING (com.apple.usb.plist)
4. In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.) You may be presented with the following message “iTunes” can’t be modified or deleted because it’s required by OS X.) Do not worry click ok and proceed troubleshooting
5. Choose Go > Go to Folder. Enter the following location into the text field that appears: /System/Library/Extensions
6. Click Go.
7. Locate the file "AppleMobileDevice.kext" and drag it to the Trash.
8. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/PrivateFrameworks
9. Click Go.
10. Locate the folder "MobileDevice.framework" and drag it to the Trash.
11. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
12. Click Go.
Step 4
Goto your hard drive in the finder
1. Goto Library
2. Goto Launch Daemons
3. Throw this in the trash: com.ghughes.wifisync.root.plist and anything with the words iTunes
4. Goto Library
5. Goto Application Support
6. Throw this in the trash: Wi-Fi Sync (it's an entire folder) and anything with iTunes
Step 5
(Before restart book mark the link command and D). Restart the Mac.
Download iTunes and reinstall it. After the install, connect the 2.0 usb device to the iPad 2 while the unit is still powered off, next connect the 2.0 usb cord to iTunes, power the iPad on. iTunes will read the device and ask to trust device, select continue. Backup the iPad device to the 27 in iMac.
Step 6
Please Rate if it helped you! After that have a cold hard drink and enjoy the day
Maybe you are looking for
-
Need to upgrade from 10.1.5 to tiger, don't have dvd drive
I only have a cd drive in my old imac. Would like to upgrade to Tiger and add an airport card. Do I need to buy the full version or just an upgrade cd? Is it possible to put an airport card in this imac? Should I add more memory too? I hear it is pre
-
How to setup a global artwork for a TV Show
Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks. ie. when watching the Tv Shows (library on iTunes) I would like t
-
SOA Composer Internal 500 error
Hi All Wondering any one can help. Have an issue in our environment woth soa/composer displaying an internal 500 error Back ground We have two domains seperated. SOA 1 = SOA and BPM SOA2 = SOA and OSB All binaries have been installed and configu
-
Photos are dark when exported from LR
I don't know if this has come up before, didn't find it in search. When I work up a photo in LR I get it where I want. I then export to another folder. When I view that photo in any other program it is very dark, though importing and viewing in LR it
-
BUG: ICE doesn't work with includes
If you're building a site using includes, you'll find they won't render in ICE. See screenshot here: 2015-05-03_12-04-56.png - DevTrainer's library Would love to keep building in a modern, forward facing way, but the editing experience in BC for our