When i plug in ipod it tells me to rename again and when i do it tells me a duplicate name was made for it then it auto syncs gets to about 200ish songs then crashes
Please help, my ipod is driving me mad!
(though possibly my ipod)
Was is the message you are prompted with when you plug the iPod Classic into your PC? Let's start there for now.
B-rock
Similar Messages
-
Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock -
When I plug it in it still charges however it doesnt show up on my library.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
I plugged my 4th generation iPod touch into my computer and when iTunes popped up, there was a notice that read, "The iPod cannot be used because the Apple Mobile Device is not started". What does this mean and what do I do?
Type "Apple Mobile Device Service" into the search bar at the top of the page by Support and read the help article.
-
The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS 6.1.5
You do have iTunes 10.7 or later on the computer, right?
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
Some of my songs are listed twice on my iPod itself. However, when I plug the iPod into my computer, the songs don't show up twice in iTunes when I click on device/music. How do I get rid of the duplicate songs on my iPod?
that is odd! that should not be happening.
Are you syncing your songs right off of itunes itself? because it should be syncing over to the ipod however it is listed in itunes. -
Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).
Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe -
I have a ipod shuffle synced to a desktop (ver 9), I have a new laptop and downloaded itunes (ver 10.7). When i plug the ipod in the new laptop it wants to delete my songs. How do i use my new alptop and ipod together?
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock -
My iPod is Causing my PC to crash when I plug the iPod Touch in.
I've plugged my iPod Touch into my laptop (USB) port and it immediately caused my laptop to crash.
I allowed the PC to reboot and tried again in a different port with the same results.
Any suggestions as what may be the problem.
Never had a hint before that this might happen.
The iPod is only 2 months old.
Thanks.Thanks again for your interest in my problem AndrewT.
Ok you mentioned three things:
1. Uninstalling the ACER camera.
2. latest version of iTunes and
3. Printer.
Regarding the uninstalling the camera - I haven't done that but worth a try. When I initially plug the iPod in it comes up as a camera (not as an iPod as it should do). I don't use the camera a lot so maybe thats the way to try and see what happens.
Regarding the latest version of iTunes - yes I've got that no problem and regarding the printer - seldom used and hasn't been used since well before this problem came about.
I'm getting more convinced that its a Microsoft Update that's causing it. I read somewhere about this but can't remember where now.
I had to again reload all the software because of other problems i.e. back to original recovery, so while loading the new software I tried the iPod touch and yes it worked. However, with all reloading of sofware there was the usual updating and after loading a number of these updates together I tried again and as expected the blue screen again.
Needless to say I'm rather frustrated at this outcome but won't give up as yet.
Thanks for your continued interest. Maybe between us we'll get it solved. It doesn't appear that others have this problem and Apple Support have never heard of it. -
ITunes crashes when I plug my iPod in
iTunes 11 used to work fine, but now when I plug my iPod touch in to sync, iTunes stops responding, and I have to close it from Task Manager. Then when I open iTunes again, everything works fine until I plug my iPod in again a it crashes
Help?Do the iPod Disk diagnostic as posted by tt2, it wont fix your problem but help in troubleshooting, especially iPod Classic hardisk.
-
When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting? On other computers this shows up fine so it is clearly a problem with itunes and not my ipod.
-
When I plug my iPod in to my computer iTunes crashes!
HELP!!! I've owned this iPod Mini for three months and now when I plug my iPod Mini in to my Mac labtop computer iTunes crashes and there isn't any more music on my iPod!!! What can I do????????
in time, your ipod will die permenantly. i know, its not a good thing to hear but yes, its surprising that you got it to work at all after it being through the washer. it was very smart to let the water dry out. i know people who panic and turn it on immidiatly to see if it still works. they wonder why it turns on, then off and never back on. but, sadly the water got into your hard drive. there is nothing you can do about it. dont try to open your hard drive though because they are made and assembled in dust free rooms. and i dont care how often you vaccuum, there is still dust in the air. where these things are assembled, the air is actually sucked out of the room so it is literally dust free. opening your hard drive will just make it worse, and may actually never work again if you do so. i have been repairing ipods for a year now, so if i were you, take my word for it.
-
When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?
Hello Julia,
Start with this article.
http://support.apple.com/kb/ts1567
B-rock -
when i plug my ipod into my computer it no longer takes me to itunes. my ipod screen is a white blank and i can no longer listen to tunes i have downloaded.
at one point i received a message that said it was corruped.My ipod has a white screen.
This forum category (where your question appeared) is for iPod shuffle, which has no screen. What iPod model do you have?
When you connect the iPod to your computer, and run iTunes, the iPod does not appear in the sidebar, under DEVICES?
At one point i got a message that it was corupted.
Where and when did this message appear? -
Computer crashes when I plug my iPod in.
Location: PA
Hey guys, I was wondering if you could give me a hand.
Every time I plug my iPod into the computer, the computer restarts and won't start back up, as in it'll get past the Windows symbol loading screen and restart again.
Do any of you have any idea on what to do?
I've already tried using a different USB cable and a plugging it into a different USB port.
Thanks in advance.seriously? not one single person knows?
Maybe you are looking for
-
How to modify Find and Change indicator?
I use Find and Change in Applewors 6. At present, this operation finds what is specified but the indicator is colored green and is open, and hard to locate on a page when looking for a single letter. I changed it from its original pale orange to what
-
Hi All, I am getting an error, when I am sending message from few BPM's to a common Webservice Synchronously. Delivery of the message to the application using connection AFW failed, due to: java.io.IOException: invalid content type for SOAP: TEXT/HTM
-
Hi everyone. I have a csv file with first Column is time stamp. but i can't read in labview because Labview don't support. The information as the attachment. Please help me read value in the first Column to time as red area on Fx. Thanks and Best Reg
-
Weblogic Start-up from CIFS share(WINDOWS 2008) is too slow.
Hi All, We are migrating to a new platform in weblogic 10.3.5. It is running on a WINDOWS 2008 Server and we are planning to use the "Whole Server" migration. As per our new architecture, we have planned to use NAS over CIFS as a storage medium. We h
-
This is sekar , a fresh B.Tech graduate in INFORMATION TECHNOLOGY. Iam willing to build my carrer in SAP . I came to know that several modules are there in SAP like NetWeaver , ABAP say application development. Somebody told that it is easy to get o