When i plug in my iphone it works with itunes,but when i plug in my ipod it dosn't work

when i plug my iphone into the computer it works, but when i plug my ipod in it dosn't charge/or show up in itunes

Does the computer have iTunes 11?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • Daughter forgot passcode on iphone 4s try restore itunes but when plugged in the home button wnt work

    daughter forgot passcode on iphone 4s try restore itunes but when plugged in the home button wnt work

    I find it hard to believe that so many people can forget a FOUR digit password that they use every day on their phone! For goodness sakes write it down somewhere!!
    Contact Apple Support in your country and see what they can do to help.
    Pete

  • Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Ok....I have a 2012 MBP that has Yosemiti installed.  The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message.  Airplay on all of my other devices work fine.  Has anyone else had this issue?

    Hey Marco'96,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/HT201343
    Thanks,
    Matt M.

  • My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT201412 MY FACEBOOK APP WILL NOT OPEN! CAN ANY HELP? I HAVE RE-INSTALLED, RESET THE IPHONE AND RESYNCED WITH ITUNES BUT IT STILL WONT OPEN, BUT IT USED TO!!  Devi

    Hi
    My iphone app for facebook will not open. It has been re-installed and the phone re-set and also synced with itunes but it still won't open. It used to work, but seems after a last update, it will not open. This also is happening on my ipad. Any clues please??
    Tik Tak

    Leilani ~ Welcome to the Support Communities. Before posting your question it's worth searching the Communities — here's an Apple tutorial:
    Apple Support Communities: Searching
    ...But since you've already posted, look in the More Like This section to the right of your post. Also:

  • HT201209 I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: you must insert your digital copy dvd in the computer in order to redeem this code" . The dvd is

    I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: " you must insert your digital copy dvd in this computer in order to redeem this code" . The dvd is in. WTH? This is especially with FOX movies, I never have trouble with Universal Picture movies.

    Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
    To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
    So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

  • My iphone 5 syncs with itunes but the music, movies and TV shows DO NOT. icloud if off on pone and store. Both itunes and phone have latest app/operating software. Please help. Thx!

    my iphone 5 syncs with itunes but the music, movies and TV shows DO NOT. icloud if off on pone and store. Both itunes and phone have latest app/operating software. Please help. Thx!

    Connect your device, select it in the left-hand column, then change the settings on the various tabs to sync the media content your library to the device. Anything already on it may be removed. If that would be a problem see Recover your iTunes library from your iPod or iOS device.
    tt2

  • I tryed to update my iphone, now its saying i have to connect with itunes but when i plug it into a computer the only option is to restore it, i would lose all my things please help quick.

    so recently i wanted to load my friends music onto my phone because my laptop broke and i had no other way to get my music. i loged out of my itunes so the music could load without any problems. i tryed to so an update on the softwear today and my phone says i need to conncect to itunes, but when i try the only option is to restore it! that would mean all my things on my phone GONE. please help i cant live without a phone for long but i dont want to have to restore it. pleaseee please tell me somone can help.

    The problem is your friend's music does not belong to you.  It is owned by your friend.
    I'm afraid you cannot do what you are trying to do.  Restoring the iPhone is what you would have to do.
    In the future, put your music on the computer and transfer it to the iPhone, not the other way.

  • Shuffle not working with iTunes Match when 3G is not enabled and the track playing is not the one showing (previous one)

    When I use Music on m iPhone on 3G with the downlod disabled on 3G, shuffle is not working.
    It stops after each track, as if it was not capable to find the next local track.
    Morevoer, it plays a track and show another one. It seems it plays the previous track but show the following.
    This makes my iPhone not usable with iTunes Match unless I disable show tracks from iCloud.

    Hi Bhushan,
    Isuse is with IIS Process. Whether its running on 32bit or 64bit. that's the one who decide which dll they want. So, in above the resolution is 
     If you are working with 32 bit you can use 
    string folder = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.System), @"..\Microsoft.NET\Framework\v2.0.50727");
    while the other way for 64 bit IIS Process, you will require 
    string folder = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.System), @"..\Microsoft.NET\Framework64\v2.0.50727");
    Hope this answer will helps some other developers issue.
    Regards, Brijesh Shah

  • I use USB portable speakers from Trust, but they don't work with iTunes, but they do with wmp... any tips?

    Hello,
    I currently use Trust USB portable speakers in combination with my windows 7 minilaptop. But the problem I have is that they don't work with iTunes(newest version). However, they do work fine with WMP, any ideas how I can solve it?
    Thanks!

    Contact the manufacturer of the speakers.

  • IPhone Working With iTunes but Blank screen

    Hi there
    My iphone died a feww eeks back. I plugged it into iTunes which told me it was in recovery mode. Pushed restore, waited and all seemed fine, iPhone appears in iTunes can add music, sync etc.
    However the screen remains off. I can't see anything. Iy you dial the phone it goes straight to voicemail. Everytime i plug in it appears fine in iTunes but nothing can be seen on the screen.
    Any ideas?
    Ben

    sveltejim,
    When you restored your iPhone, did you set it up as a new phone? Also, do you use a case for your phone, and if so, have you tried removing it?
    If those steps don't resolve the issue, it may be time to service your iPhone. You can do this at an Apple Store by reservation or by calling 1-800-MY-IPHONE (1-800-694-7466).
    To create an Apple Store reservation, visit: http://www.apple.com/retail/geniusbar/
    Hope this helps,
    Raleigh

  • My iphone fell and now shows USB on screen saying to connect with itunes but when connected i get the message from itunes tha its damaged..please help me somebody

    my iphone 4s fell and display went blank,and when i restarted it shows a USB on display asking to connect with itunes,instead i went to a phone repair shop where they service iphones too.First they said that they have to install the IOS4 again in it but they could not do so due to an error so later they asked me whether they should install IOS5 i agreed but it only happened after a long struggle yet the phone remains in the same state with the display showing USB asking to connect with itunes..they could not fix it..please help me..:(

    What's there to help?  You dropped your phone and now it's broken.  You'll have to bring your phone into Apple for an out of warranty exchange.  If you purchased Apple Care+ is will cost $49.00, if not, it will be $199.00

  • I recently changed my email address and switched it to my primary address on my Apple ID account.  It works in iTunes, but when I open up iCloud, my old ID shows and I can't access it to change anything.  Can't ask for email change for password

    I recently changed my email address and updated my Apple ID name to the new address.  It worked for iTunes and apps, but when I bring up iCloud, my old ID name shows.  I can'tr access it to change it since my security questions don't work and when I request an email to change password, it says it sent one but I do not receive anything.  Just need to klnow how to change my Applle ID on iCloud if I can't access the old one.  I'm afraid if I delete the account and open a new one, I'll lose all of my calendar. 

    If you have 'Find My iPad' activated on the iPad it will cause this problem. You will have to contact Support for help. Go to https://expresslane.apple.com ; select 'More Products and Services', then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.

  • OS 10.3 works with Linksys but when startup using 9.2.2 won't work

    I apologize if I'm on the wrong forum. I don't know if what I'm asking applies to Express or Extreme--all I know is that I have an airport card in my laptop. I have a wirless airport card in my old titanium G4 and it works fine with my Linksys SRX router when I'm running 10.3. When I start in 9.2.2 (which I have to do to run the version of Virtual PC I own) I can't seem to get the computer to talk to the Linksys. I set appletalk to airport and TCP/IP to airport and DHCP but when I type in the password for the router it says it can't go to the network. Any thoughts? I used to use the 9.2 side with an airport base station that has since died and I hadn't used the 9.2 since I bought the linksys. Thank you.

    I hope I'm doing this right. I forgot to mention
    that I am using WPA personal
    This is why.
    You need to be running 10.3 or later to connect to a WPA encrypted network, a Mac running OS 9.22 will only be able to connect to a WEP encrypted network.
    iFelix

  • Built in speaker not working with music , but when call come it will ring.

    HI , there is some problem with my Iphone 4s music wont play with built in speaker but when call is came it will ring. only problem with music play n game sound. i did basic steps like reset , restore but problem is still , kindly help.

    Clean iPhone charging port with toothbrush and small amount of Isopropyl Alcohol.

Maybe you are looking for

  • Displaying thumbnails in Bridge CS2

    Hello, I've organized the photos from my Canon Digital Rebel XT in Adobe Bridge CS2 (Version 1.0.4.6) for years without a problem.  I shoot in RAW and those files are approx. 7 MB in size.  I recently received a Canon T3i and the files sizes are appr

  • Issue in FCC paramenter in Fixed Filed Length file at reciver side

    Hi, I am doing IDOC to File interface. In that at receiver side I am sending file in Fixed Field Length Format. Receiver File Message structure is as fallows. Recordset                        --Control                         CTID                    

  • Black background with white ink

    Hi Everyone, I'm pretty new at designing and one of my friends requested for me to do a business card.  I have a few problems with it: 1) the black background is not showing up when I click preview or save as .pdf file.  How do I make sure the black

  • Excel macro error after deploying in Weblogic

    Halo, I have written excel macros and it is working fine. but if the same file if i try to open from hyperlink after deploying in Weblogic server , I get the error "error occured initializing the VBA libraries. If Microsoft Visual Basic for Applicati

  • Which Mac should i get?

    I have just started to get into iSO App development. I mostly create websites so I'm thinking about taken that knowledge over to iSO. Basically I would be making simple light weight apps, no games or anything like that. So my question is which would