When i plug in my iphone to my computer i get nothing.mac ox snow.
i upgraded my iphone 3gs, to iOS 5. my computer will not actknowlegde the phone when i plugged it in to my computer. ( Mac OS X 10.6.8) it use to snyc with itunes automatically. i get nothing. it won't even recharge off my computer
Image Capture (in your Applications Folder) - In the preferences you can decide to 'Do Nothing' when a camera is connected.
Some versions also have this option in the iPhoto Preferences.
Regards
TD
Similar Messages
-
After downloading the 64-bit version of iTunes on my Windows 7 machine I get the "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone I get an error message that says, in part, "...the required software is not installed. Run the installer to remove iTunes, then install the 64-bit version of iTunes". I've been at this for hours, carefully deleting all Apple software (Apple Mobile Support, Quicktime, etc. and before each attempt to install the 64-bit version from Apple ( no third parties). Same result each time!!! Any ideas????
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
I can't get my iphone5 to upload pictures to my MAC. I have a lot of pictures and none show when I plug in the iphone to my computer
You can't get iphone to sync pics to a mac? What have you tried? What didn't work?
In itunes, did you go to the photo tab for your device and turned on iphoto to perform a sync. -
WHEN I PLUG MY NEW IPHONE INTO MY COMPUTER, ITUNES IS NOT LOADING UP
when I plug my new iphone 3gs into my computer, itunes is not loading, I have latest itunes loaded plus 3 other ipods on account
The lower part of the following link gives instructions: http://support.apple.com/kb/HT2109
-
When i plug my iphone into my computer, it doesn't pop up in the devices column in itunes, but iphoto opens automatically asking me to import... I want to get my music off my computer, but this is problematic with itunes not recognizing my device!
Sounds like you need to authorize your computer. Open iTunes < Store on the menu bar < Authorize this computer.
-
How can i prevent iphoto from opening when i plug in my iphone to the computer?
Hi There,
I have a question, when I connect my iPhone to the computer the iPhoto automatically opens.
how can i prevent this from happening? it always slows down my computer.
any help will be appreciated.
thanksImage Capture (in your Applications Folder) - In the preferences you can decide to 'Do Nothing' when a camera is connected.
Some versions also have this option in the iPhoto Preferences.
Regards
TD -
I am trying to uplod a photo album from my camera roll to my PC... when I plug the device in and go to import photos it says I have no photos on my devise....
Have you checked out these kb's
http://support.apple.com/kb/TS3697
http://support.apple.com/kb/HT4236
http://support.apple.com/kb/HT4083 -
I need help figuring out how to get my iphone to show back up on my itunes on computer
plug it in and nothing shows up.Hey ashleighd07!
Here is an article that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
ITunes and iTuneshelper crash when I plug in my iPhone
I'm out of ideas on this problem...
Beginning yesterday, when I plug in my Iphone to sync it with iTunes, both iTunes and iTuneshelper crash, and Windows gives me the option to create a crash report. As a result I can no longer sync my iPhone with my Thinkpad.
No new software in the past several days, no other change in system stability. iTunes 9.0.3.15, iPhone OS 3.1.2, Windows XP SP3 with all updates applied.
Is there a log or dump file I can upload to help point to my problem?
Thanks in advance.
Andrew
Message was edited by: fredd9999
edit: I should add that when I plug in the iPhone, iTunes doesn't even get to the point of displaying its gui...it crashes on start and iTuneshelper goes with it. If I leave iTuneshelper not running and just re-run iTunes by manually starting it, it won't recognize the iPhone but doesn't crash, either, when I plug in the phone. I know iTuneshelper interfaces the phone to iTunes, so I guess something is going wrong in the iTuneshelper-iPhone exchange.This is interesting: when I attempted to re-boot into safe mode I inadvertently booted into the Thinkpad Rescue and Recovery partition. The first thing it does is check the core OS files, and it found that ws2_32.dll was corrupted. It replaced the file and I re-booted Windows in normal mode. After it finished booting I plugged in the iPhone and up came iTunes. The phone synced and I'm back in business.
I'm going to take a look at the article you just pointed to, never heard of that tool. Hopefully Windows remains stable and whatever corrupted ws2_32.dll was a one-time actor.
Thanks for your help here, you got me headed down the right path.
Andrew
Message was edited by: fredd9999 -
Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1) Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2) Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3) Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selectedYou need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.
-
I have not synced my iPhone for some months. When I plugged it into my computer the iTunes program does not launch. There is an iTunes icon installed but this only opens as a Music/video program. There is no side panel where I select my device, account, apps, etc. I have tried re-installing iTunes but there is no difference. AutoPlay opens when I plug in the iPhone offering file, picture etc sharing but nothing elso opens.
Hi jonboy12355887,
Welcome to the Apple Support Communities!
If your iPhone is not showing in iTunes when connected to your Windows computer, please follow the steps listed in the attached article. I know situations like this can be very frustrating, but the information provided in this article should help you resolve the situation.
iOS: Device not recognized in iTunes for Windows
Have a great day,
Joe -
On my laptop i had itunes but recently i needed to delete everything on my laptop including itunes. When i went to update the music on my iphone i re downloaded itunes but when i plug in my iphone a message pops up saying my phone is connected to another itunes library. When i clicked sync it says that i have an option to erase and re sync my iphone. I dont really care about loosing my music but i dont want to lose all my pictures on my iphone. Is there anything i can do to keep them?
Syncing shouldn't trouch you photos unless you have photos in a Photo Library album. These would be photos that were synced to your phone from your computer. If you do have any, you'll need to use an app like PhotoSync to transfer them to your computer prior to syncing.
If you prefer to backup your camera roll photos prior to syncing, open iTunes and go to Preferences>Devices and check "Prevent...from syncing automatically". Then connect your phone to your computer and import them as explained here: http://support.apple.com/kb/HT4083.
Then, to minimize data loss, follow the steps in this user tip: https://discussions.apple.com/docs/DOC-3141. To follow the steps, first open iTunes and go to View>Show Sidebar. Also, Transfer Purchases is now located in File>Devices. -
When I plug in my iPhone 5 w/OS 8.1.2 and try to sync. w/iTunes 12.0.1 it crashes. Any fixes?
I noticed this problem, iTunes displayed my iphone, but crashed soon after, with the color spinning wheel.
I did the following things and it worked for me.
I downloaded the last version of itunes, remove iTunes.app with CleanApp, and all these files.
/Library/Frameworks/iTunesLibrary.framework
/System/Library/CoreServices/CoreTypes.bundle/Contents/Library/MobileDevices.bun dle
/System/Library/Extensions/AppleMobileDevice.kext
/System/Library/Extensions/AppleUSBEthernetHost.kext
/System/Library/PrivateFrameworks/AirTrafficHost.framework
/System/Library/PrivateFrameworks/CoreFP.framework
/System/Library/PrivateFrameworks/DeviceLink.framework
/System/Library/PrivateFrameworks/iTunesAccess.framework
/System/Library/PrivateFrameworks/MobileDevice.framework
I restarted, installed iTunes, restarted again and I was able to sync again. -
How can I disable the Photos app from automatically running when I plug in my iPhone?
How can I disable the Photos app from automatically running when I plug in my iPhone?
I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
I just want to NOT have to kill the Photos app every time I plug in my phone.
Thanks.I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted. But it is another example of the hide-and-seek Apple likes to play with us.
The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
Have you looked at Capture One? It looks much more similar to Aperture than Lightroom. -
Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.
Maybe you are looking for
-
Single Report Goods Receipt to Vendor Payment ( GR-IV-vendor payment)
Hi Friends, My client wants to asking the single report for GR to Vendor payment. Please let me know how to get the report? Regards, Chandra.
-
Can two users share the same catalog in PSE 10 on OSX Lion?
Subject line says it all. I was able to do this with PSE7 on Windows 7, just by placing the catalog in a shared folder. I tried something similar on Mac, creating a catalog under \Users\Shared, but only the user who created it is able to open it.
-
Hi. I had PhotoShop CS6 trial, which expired. I have purchased Creative Cloud student edition, I receive a message that my PhotoShop trial has expired. I am prompted to purchase the product to extend it, or type in the product's serial number (I neve
-
Photo albums not deleting from my iphone 6
Photo albums not deleting from my iphone 6 even after i remove them from itunes. plus it shows as others in the storage. how to remove the albums ? i removed them from the itunes linked folders though it still shows on the iphone !!!
-
Creatednew event and put it in SWEC
Hi, I created a new event for buss obj BUS2081 by extending it. I put this in SWEC and put the radio button on 'on create' but the event did not occur while creating the document but it occured while changing the document further i checked in SWED an