When i plug in my ipod nano ~OH MY GOSH~

*First of all i would like to apologize ahead of time if this problem has been addressed before*
When i plug into my PC (Compaq Presario w/windows XP) i get
'no disk exception processing message c0000013 parameters 75b6bf7c 4 75b6bf7c 4 75b6bf7c 4'
That alert pops up time and time again. I have to restart to get rid of it.It also happens when i plug in a shuffle i recently aquired. Now i am wary to use my itunes and ipod nano at all due to this headache. Is there a step by step explanation/way to resolve this curse? i hope someone can advise me,,thanks all

Have you tried the steps listed here?
http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing. html

Similar Messages

  • When i plug in my ipod nano (6th generation) a message comes up saying it's 'detected but not identified' i've spend like all day trying to solve it, uninstalled it, reinstalled it and nothing seems to work..

    when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..

    Hello beafraser,
    Here's an article to help troubleshoot when your iPod is detected but not identified.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Hope that helps.
    Thank you for visiting Apple Support Communities.
    Nubz

  • My PC restarts when I plug in my iPod Nano.

    Hi. Can anyone please help? Sometimes when I plug in my iPod Nano my computer re-boots. It doesn't always do a clean re-boot and I have to unplug the Nano and re-set the computer a couple of times. I have seen similar problems on this forum, and no, I am not using Aluria Spyware Eliminator. I use Norton Anti-virus.
    Help!

    Brian, another way of looking at this is: how many devices do you have connected to the USB port (the same one)? I've found through using external storage devices that one port can handle two devices. I had four going at once one time, but the same thing happened, only two would evenually connect.
    There's a limit to connections per USB port, I'm just trying to see if you have too many connectins on one port. If so, obviously, if you have other USB ports available, plug the nano into it's own port and see if that "cures" the missing nano.

  • ITunes quits when I plug in my iPod Nano

    Good day,
    When I plug in my iPod nano, iTunes opens and starts to sync my iPod and then after about 6 secs iTunes closes unexpectedly. My iPod is no longer visible on my desktop even though it is still plug into my computer via a USB port.
    I have uninstalled and reinstalled iTunes and am still having the same problem.
    I also tried to restore my iPod, but can't figure out how to do this without iTunes and I can't restore using iTunes because it keeps closing unexpectedly before I can complete the operation.
    Any help would really be appreciated.
    thank you,
    Cedartable

    Someone told me how to prevent my iPod from syncing when I plugged it into my iMac: go into Preferences in iTunes. Click on Devices. Tick the Prevent ipods ... from syncing automatically. Open iTunes. Plug in your ipod. Click on your iPod. Choose Restore.
    I did a Restore and now my iPod is syncing just fine and iTunes is not closing unexpectedly. Yay.

  • When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer.  It then attempts to install the printer software, which is already installed.  The only way to fix it is to unplug the printer.  Any thoughts?

    When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer.  It then attempts to install the printer software, which is already installed.  The only way to fix it is to unplug the printer.  Any thoughts?

    Turn the printer off.

  • When I plug in my iPod nano iTunes asks me to restaure it therefore loosing all my data. Also, there is no tag for Nike Run sync.

    When I plug in my iPod nano iTunes asks me to restaure it therefore loosing all my data. Also, there is no tag for Nike Run sync.
    Can I syncronize my iPod without loosing all its data?. How about syncronizing it to my iPhone?

    Have you tried the steps listed here?
    http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing. html

  • When i plug in my iPod nano, it doesnt come up in iTunes. It is a file.

    When i plug in my iPod nano, it doesnt come up in iTunes. It comes up as a file. It wont show up on iTunes. What can I do to fix this?
      Windows XP  

    Welcome to Apple Discussions.
    You mean it appears in My Computer but not in iTunes? If so, check this first:
    iPod missing in My Computer or in iTunes on Windows
    iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes

  • When I plug in my iPod nano 4th gen to iTunes, a lot of space is taken up by 'other'. What is this and how can I get rid of it to free up some space?

    When I plug in my iPod nano 4th gen to iTunes and click on my iPod, I can see a graph showing how much space is available on my iPod and what it is being taken up by.  A lot of space is taken up by 'other'. What is this? I have a big iTunes library, with about 2000 songs, so I don't want all this space taken up by something I don't know what it is. How can I get rid of it?

    OmniDiskSweeper is a good program to see what's taking up space: http://www.omnigroup.com/products/omnidisksweeper/

  • When I plug in my ipod nano 2nd gen, it doesnt connect it to my itunes.

    When I plug in my ipod into my itunes, it only charges and doesnt connect to itunes when i try to update some songs. whats happenin?

    Have you had a chance to look at these troubleshooting documents? They may be of some help:
    iPod shows up in Windows but not in iTunes
    iPod missing in My Computer and in iTunes

  • Why does iTunes on my Macbook Pro crash when I plug in my iPod Nano or Classic to sync?

    When I plug my iPod Nano or Classic into my MacBook Pro, with iTunes already open, it crashes iTunes.  Plus, the device doesn't show up in the device column on the left, but on the upper right of the desktop.

    Hi monicaxh1,
    Here is an article of troubleshooting for when your iPod does not appear in iTunes:
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    The issues you are seeing may be connected, so I would try this troubleshooting first.
    Cheers!
    - Ari

  • My PC Freezes when I plug in my IPod Nano!!! Please HELP!!!!

    Hello, I just bought a refurbished ipod nano and everything works fine until I plug it into my computer I do not know what to do please help me.
    P.S. If this has been brought up already I am sorry I didn't have time to search for it.
    Thanx

    Same problem. Im running on a sony vaio and everything just stops working until i unplug my ipod. I'm really getting annoyed with this. I even tried running it through winamp, and that froze even worse. Im able to close all the windows and whatnot, but when i try to terminate an application through task manager, it doesnt go away until i unplug my ipod, meaning i cant restart itunes without unplugging my ipod. then i unplug and it works fine. then i plug back in and it freezes up again!

  • ITunes Hangs when I plug in my iPod Nano

    I'm hoping someone can help. When I plug in my new iPod Nano, it shows up in iTunes, but iTunes hangs claiming it is Analyzing Track X of Y. It will do this for infinitely long without making any real progress. If I look under the event viewer, I get some mention of Hard Drive device failure, etc.
    Any clues? Thanks.

    Here are the details of the eventlog entry:
    Event Type: Warning
    Event Source: Disk
    Event Category: None
    Event ID: 51
    Date: 6/7/2006
    Time: 7:34:06 PM
    User: N/A
    Computer: ComputerName
    Description:
    An error was detected on device \Device\Harddisk2\D during a paging operation.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 03 01 68 00 01 00 b6 00 ..h...¶.
    0008: 00 00 00 00 33 00 04 80 ....3..€
    0010: 2d 01 00 00 00 00 00 00 -.......
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........
    0028: f5 d6 00 00 00 00 00 00 õÖ......
    0030: ff ff ff ff 03 00 00 00 ÿÿÿÿ....
    0038: 40 00 00 4e 00 00 00 00 @..N....
    0040: ff 20 0a 12 4c 02 20 40 ÿ ..L. @
    0048: 00 00 01 00 0a 00 00 00 ........
    0050: 00 00 00 00 78 0c b6 86 ....x.¶†
    0058: 00 00 00 00 70 6c e6 86 ....plæ†
    0060: 00 00 00 00 48 f5 0c 00 ....Hõ..
    0068: 28 00 00 0c f5 48 00 00 (...õH..
    0070: 80 00 00 00 00 00 00 00 €.......
    0078: 00 00 00 00 00 00 00 00 ........
    0080: 00 00 00 00 00 00 00 00 ........
    0088: 00 00 00 00 00 00 00 00 ........
    Thanks

  • ITunes has a weird error message when I plug in my iPod Nano

    I need help really bad. So my problem is that one day I sat down at my computer and downloaded 2 songs on my iPod Nano(1st generation) and then I took the iPod off the dock and all the songs were gone on the iPod. That has happended before so I figured that I could just put it back on the dock and download all the songs again, like before. I put the iPod back on the dock and iTunes opended...I waited and waited. Then a message came up and said "iTunes cannot read the contents of the iPod. Use the iPod Updater to restore the iPod to factory settings." I have tried everything. Restarted my computer, searched for help on apple's support section, etc. Someone please help me!  
    Dell Dimension 4100   Windows XP   iTunes 7 and iPod Nano (1st generation)

    Did you install iTunes to your computer first?

  • When I plug in my IPOD nano nothing happens!

    Ive had my IPOD for about 2 years now and for the longest of time I would just plug it in and it would pop up sync. IPOD. Today I plugged it in and nothing happened it just goes to the recharging mode. Ive tried opening up itunes and nothing. Ive tried other computers and nothing wont even pop up...Can anyone help me?

    I am also having this problem and it happened after I plugged it into a computer at my school and there was a 'power surge' problem.
    It doesn't do anything other than going into charging mode and I don't even know if it charging it while it's doing that.
    Help, please.
    Message was edited by: Leighanief

  • When I plug in my ipod Nano i syncs to itunes but I can't get the music from my Library in Windows Media Player???

    How can I get my music from my Library in Windows Media Player to sync to my iPod Nana?

    You can't sync an iPod using Windows Media Player.  You need to add the songs to your iTunes library first, and then sync those songs to the iPod.
    This document provides more information (Add to Library section)
    http://support.apple.com/kb/HT1347
    NOTE:  The WMA files (the file type used by Window Media Player) need to be unprotected (no DRM).  They are converted to a format supported by iTunes while adding to the iTunes library.  This WMA conversion feature only works in the Windows version of iTunes (Mac users cannot do it).
    I believe you can drag and drop the WMA files, or the folder containing the WMA files, onto the iTunes window.  The original WMA files are not changed.  iTunes creates its own converted files at the location it stores all the iTunes media files.

Maybe you are looking for

  • My caller id is not working on iphone 5 - it beeps but doesn't show who is calling or let me click over

    I have recently had my iphone 5 not show who is calling on call waiting.  The phone beeps but doesn't show the number / per son that is calling, won't let me click over and won't show who it was in my call history.  Help very annoying.

  • [SOLVED]Apache fails to start

    I`ve had Apache,PHP and mysql running but few days ago i saw that httpd fails to start. # apachectl configtest httpd: Syntax error on line 54 of /etc/httpd/conf/httpd.conf: Cannot load /home/svejaka/Server/modules/mod_authn_file.so into server: /home

  • Trying to upgrade to 7.0.2, says not connected to internet but am

    I'm trying to upgrade iTunes on our PC to 7.0.2, but am getting error message that we are not connected to Internet, check connection, and try again.  We are connected, modem and all lights are on and browsers working.....what should we do?  Thank yo

  • Is there a reference of MDM ADMIN APIs

    Hello. I'm looking for the documents and HTML references of MDM ADMIN APIs to understand mdm-admin.jar, mdm-common.jar, mdm-core.jar, mdm-protocol.jar. Regards. Koji.

  • ODI-1228 - strange SME issue...

    Hi Guys, I have following problem: I used Interface with filters like that: EBS.Year = '#Year' EBS.Period = '#Month' After I deleted this filters my interface fails during Loading data to SME step with following error: ODI-1228: Task SrcSet0 (Loading