When i plug in the usb guitar cable the audio in my headphones goes away
when i input the guitar to usb interface it asks to connect but calls it a headphone. it was working but now the sound doesnt come out of the computer or headphones
Go to GB's audio prefs and make sure that your interface is set as the audio input but the internal audio is set as the audio output.
Similar Messages
-
It Just Happened Recently, As Soon As I Plug In My HeadPhones, It Stops Playing. When I Select A Song, It Seems Like Its Going To Play, But Returns To The Home Screen. But When I Take The HeadPhones Out, And Play A Song, It Plays Like It Use To, Im Really Confused.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
To find SN:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
This is a brand new computer.
I took the computer to the tech and when he hooked it up everything worked fine. However, when I took it back home the same problem existed.
I tried Chrome and it works OK.thats not how airplay mirror works
read this
http://support.apple.com/kb/ht5404 -
iTunes has quit recognizing my iPhone as a device. The computer still dings at me when I plug in the USB cable, but the program is failing to show my phone as a connected device. How do I fix that??
I think this article will help you.
-
When I plug in an USB to the usb port my computer shuts down
I bought my macbook air a couple months ago and when I plug in the usb into the usb port my computer shuts down. I dont know why this happens, but is not always, just sometimes.
Does anyone know why this is happening?Have you tried plugging the flash drive into a different Mac to see if it works? The Air shouldn't have any problem with it, I use a couple of flash drives in mine, although I don't have a pq1. Did you try both USB ports on the Air? Do you have another flash drive you can test in the Air, or a different USB device, like a hard drive or printer?
The only thing I can think of is either a bad flash drive, or a bad USB port on the Air. Sorry, can't be more help than that. -
When i plug in my electric guitar to the i mac , it does not recognize it
Hello !!
When i plug in my electric guitar to my i mac it doesnt recognize it , could it be because it has just one audio plug in ?
Thank you very much !
Martin.What model year is you imac? If it is a newer model year, late 2012, then that model imac does not have a audio input system and yes it is because it only has one audio jack and that is only for output. To successfully connect your musical instruments you will need a usb audio interface system of some type.
-
Hi this morning when i switch on my fon i am unable to switch on my fon then when i plug in the charger via cable plug in its mention activation required than when i on its mention plug in itunes
Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store. -
4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Battery icon dose not showing when i plug in to usb or power
battery icon dose not showing when i plug in to usb or power? and not charging when phone is on
I would try another cable or try the cable in another ios device
to verify if the cable was broken or your iphones connector is -
I dont know why it happens. I clos my mac, it goes to sleep and when it is already sleeping if i plug the charger then it wakes up, or at least the fans and the white led light near to the infrared thing turns on. And this also happens if it is sleeping with the charger plugged and whenever i want to quit the plug cause its already charged it turns on. All this happens with the lid (top cover) closed and only when it is sleeping and I unplug when it is pluged, or plug if it is not. I have some more Macbook pro olders 2010, and 2009-8 with 10.9.2, and this thing does not happen to them. Please if someone knows tell me??? If it is not clear is the Macbook Pro 13 with 3.0 usb, disk drive, the latest that apple announced with the disk drive, so i think it is late 2012 or 2013
There are two distinct sets of settings for Energy-Saver items -- one for Battery, one for Power Adapter.
When you plug in the adapter, it needs to wake up and change over to the other settings -- sort of like the hospital waking you up to be sure you get your sleeping pill.
The later versions of Power Management are more sophisticated than older versions, so they are more likely to do this "correctly" -- to wake up and change over. -
I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
Apple Retail Store - Genius Bar -
Creative Cloud Crashes When I Plug In a USB Drive
My problem is that Adobe Creative Cloud application crashes every time I plug in a USB drive. My computer is Windows 7 64-bit. A brief history:
1. I signed up for Creative Cloud and started to download and install the Creative Cloud desktop application (an upgrade to the Application Manager). The installation failed. I tried it again and the installation failed again.
2. Contacted Adobe Tech Support via live chat where the tech took over my computer and did so many things I couldn’t follow what he was doing. He finally got the Creative Cloud desktop application to install successfully. At least we thought so at the time.
3. I was then able to download Photoshop CC and Bridge CC and begin using the applications.
4. A day or two later I discovered the Creative Cloud application (not Photoshop or Bridge) crashes every time I plug in a USB drive.
5. Since then I’ve had two more chat sessions with Adobe tech support where they had me rename some folders to OOBEold and uninstall and reinstall the Creative Cloud desktop application. The last time they had me download and try to run a Creative Cloud Cleaner, but it couldn’t find the Creative Cloud application so we couldn’t run the cleaner. These reinstallations were unproductive as Creative Cloud still crashes when I plug in a USB drive. It doesn’t matter if I use the USB ports on the front or the back of the computer.
Has anyone else experienced this particular issue with Creative Cloud and, if so, were you able to solve the problem?
Is there a graceful way to close the Creative Cloud application instead of using the Task Manager to end the process before I plug in a USB drive? There is a drop-down menu by a gear icon in the upper right of the application window that has Preferences and Quit Creative Cloud as two of the options. What does the option “Quit Creative Cloud” actually mean? Are you just closing the application or are you doing something more serious? Under preferences there is an option that is selected by default to Launch at login. What does “Launch at login” mean? Does it mean when the computer starts up or when you actually go to Adobe and login to your account or something else?
Thank you very much for any suggestions.Dave,
Thanks for your reply. After four very lengthy tech support chat sessions, the last tech support person (30 July, 2013) suggested that it was probably some sort of conflict with the drivers for the USB ports on my Dell computer. The case number you requested is still open and is: 0184509373.
I spent a lot of time during the last tech chat trying to determine a graceful way to quit the application before using any USB devices. Just clicking on the X to close the window does not close the application as it still shows up as an active process in Windows Task Manager. Our conversation kept getting confused between the Creative Cloud application and the more global Creative Cloud and which you were quitting or logging out of. Adobe should have kept the name “Application Manager” for the application.
After experimenting, I’ve devised the following work around. It’s a nuisance, but it seems to work a little better than just crashing the application. I open the Creative Cloud desktop application and choose “Quit Creative Cloud.” I can then use a USB device without a crash. After disconnecting the USB device, I restart the Creative Cloud application by double clicking on the icon on my desktop. Finally, I can use Photoshop CC and Bridge. If I don’t restart the Creative Cloud application first, Photoshop asks me to register the software again. This puzzles me as I didn’t think the Creative Cloud application had to be running in order to use Photoshop.
Thanks for your attention and assistance.
Charles -
When I plug in an USB stick, my MacBook Air disables all USB devices
When I plug in an USB device, my MacBook Air disables all USB devices and the keyboard. It looks like it would freeze, but all applications still work. It just does not respond to neither keyboard nor mouse. The only solution is to force-restart it. What can I do? I am using Lion and have updated it. The same error occured with Snow Leopard as well. Unfortunately, it sometimes happens and sometimes not. I have a suspicion it is related to the devices power consumption in corelation with the battery charging status.
I am using a MacBook Air 13", late 2010 version.Have you tried plugging the flash drive into a different Mac to see if it works? The Air shouldn't have any problem with it, I use a couple of flash drives in mine, although I don't have a pq1. Did you try both USB ports on the Air? Do you have another flash drive you can test in the Air, or a different USB device, like a hard drive or printer?
The only thing I can think of is either a bad flash drive, or a bad USB port on the Air. Sorry, can't be more help than that. -
How do I get sound out when I plug in a USB mic?
How do I get sound out when I plug in a USB mic? I cannot hear my instrument tracks either. It will record my vocals, but I can't hear them. If I unplug the mic and restore the internal devices, then I can hear all tracks, including the vocals. I'm sure there's a simple solution.
Hi
Prior to Logic 9, you cannot separately choose Input/Output audio devices, so you either have the USB Mic, or the Built-in audio (or an external audio interface).
To set up for 'mixed' devices, you need to use AudiMIDI Setup (Utilities folder) to create an Aggregate Device.
http://support.apple.com/kb/HT3956
Note that I recall that it was 'sensitive' to which order you create the devices with some USB Mics.
HTH
CCT
Maybe you are looking for
-
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem. I have tried
-
My MacBook hard drive is full again. I have a 13in. Aluminum, Late 2008 MacBook, and about 18 months ago (in October 2013), I replaced the original hard drive with a Samsung SSD 840 Pro Series 256GB hard drive. However, my MacBook is now already sayi
-
Displaying date in dd/MM/yyyy format
Hi all, I am having one date field .To display the date in correct format, I created a dictionary simple type of type date and entered dd/MM/yyyy in representation tab. I was using 2004 and it was working properly. Now I am using 2004s for the same a
-
Where is page information stored in DB or can I add a portlet dynamically?
I want to add a protlet to a page dynamically. I assume if I can find where pages are stored, I can look there for a hint. Does anyone know where they are stored? Or how do I add a protlet to a page dynamically? I suppose I could use a dynamic page,
-
i cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.