When I plug in the VGA adapter the colors change to green and pink on the screen
When I plug in the VGA adapter to my new MacBook Air, even without connecting the other end to the lcd projector, the screen colors on the computer change to green and pink
As Stated above...
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
If no joy... Try here > DFU Mode
Similar Messages
-
I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)
Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7 -
As soon as i plugged it into my stereo system with the otter box extender attached, ive tried to reset my phone by holding the lock and home button at the same time but nothing happens. After its been plugged in it starts to get warm, but the computer doesnt recognize it and nothing seems to happen.
It could be the battery if it was left in a very hot car or something and now it has practically no capacity.
(Lithium Ion batteries should mever be allowed to get completely flat - they need to retain some energy in order to recharge)
But if you haven't done anything that you think would have damaged the phone, and it is still under warranty, contact Apple and they'll sort it. -
I dont know why it happens. I clos my mac, it goes to sleep and when it is already sleeping if i plug the charger then it wakes up, or at least the fans and the white led light near to the infrared thing turns on. And this also happens if it is sleeping with the charger plugged and whenever i want to quit the plug cause its already charged it turns on. All this happens with the lid (top cover) closed and only when it is sleeping and I unplug when it is pluged, or plug if it is not. I have some more Macbook pro olders 2010, and 2009-8 with 10.9.2, and this thing does not happen to them. Please if someone knows tell me??? If it is not clear is the Macbook Pro 13 with 3.0 usb, disk drive, the latest that apple announced with the disk drive, so i think it is late 2012 or 2013
There are two distinct sets of settings for Energy-Saver items -- one for Battery, one for Power Adapter.
When you plug in the adapter, it needs to wake up and change over to the other settings -- sort of like the hospital waking you up to be sure you get your sleeping pill.
The later versions of Power Management are more sophisticated than older versions, so they are more likely to do this "correctly" -- to wake up and change over. -
4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My iphone5 will die or just turn off, when I plug in the charger the screen just keeps turning
My iphone5 will die or just turn off, when I plug in the charger the screen just keeps turning off and on. It will do this for hours until it finally stays on and charges. I've gotten a new charger, but it didn't work. Help
Hi there katygracie88,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
My iPhone 5 with iOS 6.1.3 keeps crashing at 45%!when my iPhone nears 45% from a full charge it suddenly says the phone is 20% then 10% then 1% and then it goes dead.when I plug in the charger instead of waitin a few minutes for it to turn on,it instantly turns on and says the battery is 45%!this is OK at home where I can keep the charger plugged in but what about when im on the go?PLEASE HELP!!!
This is most likely faulty battery. Make Genius reservation or set up service and take or send to Apple for resolution under Warranty.
-
i plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old information from my G3s on my new iphone 4. how can i reverse this? please help.
Hi, raneth's boyfriend!
Unfortunately, iTunes was told to restore all data from an old backup onto the new phone, and that cannot be undone.
However, prior to this, iTunes 10 would have also asked to make a backup of the phone before doing the restore. If the user elects to say "yes" to perform the backup, then iTunes would have backed up the phone before erasing it.
Hopefully, that backup will still be available in iTunes, and if so, it would be backed up under the new phone's name prior to it being erased and restored (if the name of the new phone is different to the name of the old phone).
To check if iTunes has a backup of the phone prior to the restore, look in the Devices category in iTunes Preferences. All backups made are timestamped and are identified with the iPhone's name at the time of the backup. Look for:
• a backup of the phone using the new phone's name prior to the erase and restore, or
• a backup with the same date and time as that when the phone was erased and restored (not the date and time AFTER when the phone was erased and restored!). This may be the case if the new and old phones have the same name.
If a backup is available, you can erase and restore again using that backup. The phone will be restored with what would hopefully be the original image of the new phone.
If no backup was made prior to erasing and restoring the phone initially, then there is no way to
undo it, meaning your phone's original data has been lost.
--tonza -
I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?
Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same. -
Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original. -
Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, dialog box says I need to update itunes to 10.6.3 or later. I did that update, but still get the same error message.
Can anyone offer suggestions?
Thanks!Since it told me to update, I updated to 10.7.
Then when I plugged in the phone again, it gave the same message that I need to update itunes. -
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I plug in my ipad it automatically tires to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?
You can open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
To move the current backup folder from C: to D: type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
tt2 -
I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
Apple Retail Store - Genius Bar -
I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.
You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
Hope that helps
Maybe you are looking for
-
How to print OCR text in Adobe invoice form
Hi All, I have got a requirement to print the customer number and invoice no as OCR text on the invoice adobe form. So, if some one has any idea or might have gone through this scenario, please share your suggestions for the same.
-
Select a set of integer from another set
I have a set of integers from 1 to 7. I want to select the integers which not exist in this set. For example: the set contains (1,3,6,7) The result should be (2.5) how to do it in SQL
-
In mail the canvas blows up in width
Got a problem with my mail program in OSX Mavericks(attachment). When i reply to an e-mail or i want to send a new e-mail the canvas blows up in width and i can't resize it. This happens in full screen mode and normal mode. I removed mail from my com
-
Logical flow between User forms and workflows
Hi, I want to know the logical flow among jsps,UserForms and workflows in IDM. This may appear as a silly quest. But I want to know how exctly the workflows are getting excuted when we click the buttons on the forms.... For eg While creating the user
-
Has any one tried configuring the IPTV Manager to work with IIS?