When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?

When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?

There are two different types of adapters by Apple that look similar. One is a 5 Watt adapter used with iPhones and iPods. The other is a 10 Watt adapter used with the iPad. Other than looking at the text on the adapter, which is hard to read, you can tell the different by looking at the socket the pin part plugs into the adapter. The 5 Watt has two notches and the 10 Watt has only one notch.
Make sure you use the 10 Watt adapter with an iPad.

Similar Messages

  • Why when i plug my ipad in to chargr it says not charging

    when i plug my ipad in to charge it says not charging how do i charge it

    About the iPad Battery - http://www.apple.com/batteries/ipad.html.
    Charging the iPad battery - http://support.apple.com/kb/HT4060.
    They recommend you use the wall charger, not the computer and the cable, as many computer USB ports, are not 2.0 USB ports, and therefore are not powerful enough to charge the iPad.  See the article entitled "Charging the iPad Battery"

  • When I plug my iPad into my Mac it will not sync

    When I plug my iPad into my Mac it will not sync and my iPad will not charge. I've used every chord that I own. In addition, I've plug other things into my Mac and they work fine. If I plug my iPad into the wall it charges.

    Then it doesn't seem like its the cable then does it.
    If the iPad isn't being recognized in iTunes, you can start with something very simple. Quit iTunes, reboot your iPad, restart your Mac and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If it still isn't being seen by iTunes, look for help here.
    http://support.apple.com/kb/TS1591
    Or here.
    http://support.apple.com/kb/TS3540

  • My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

    My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • K recent upgrades my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

    I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

    I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

  • Hi no none of my other data services are working normally and when I try to send my picture messages it says not delivered and tells me it's unable to send.

    Hi no none of my other data services are working normally and when I try to send my picture messages it says not delivered and tells me it's unable to send.

    Hello Joe,
    I found a few resources you can use to troubleshoot the iMessage issues you are experiencing. 
    I recommend reviewing this article first:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    If your Apple ID is activated in the Messages Settings and you still cannot send and receive iMessages, I recommend following the steps in the section titled "If you still can't send or receive iMessages" in the following article:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPod touch 5 battery drains very quickly even when not used

    HI , I got a new iPod touch 5 for Christmas and let the battery drain before charging to 100%.
    within a very short period of time and without using the iPod  , (poss 2 - 3 hours ) the iPod was completly flat and would not even show the charging symbol. I charged it again and the same happened again , i did update the iPod during this time so it is currently running the latest iOS , I have tried a hard reset but still the battery drains very quickly without using the iPod at all. It is currently pretty useless as the battery life is so short !!!

    First:
    http://www.cnet.com/news/some-ios-8-users-report-sluggish-wi-fi-shorter-battery- life/
    http://www.macrumors.com/2014/09/22/ios-8-issues-battery-drain-wifi/
    http://gadgets.ndtv.com/apps/features/how-to-improve-battery-life-on-ios-8-59595 1
    http://www.imore.com/how-fix-iphone-6-and-ios-8-battery-life-problems-0
    Boost Your iOS 8 Device's Battery Life With This Simple Trick
    Next
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Draining completely in 3 hours indicates a probolem
      Apple Retail Store - Genius Bar                                                              

  • My IPad 2 won't stop saying not charging when plugged in any outlet

    My IPad 2 keeps saying not charging when plugged in any outlet

    On the off chance try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • Ipad won't charge keep saying not charging

    ipad wont charge keep saying not charging

    Stefann-
    What percentage charge is shown in the upper right cornert?
    If it is less than 100 percent, and the iPad is connected to its wall charger, something is broken.  It could be the iPad, the cable or the wall charger.
    The only thing I can think of to try, is to reset the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart in a couple minutes.  Resetting will not hurt anything, and sometimes clears mysterious problems.
    Charging from your computer's USB port may not be reliable, especially when the iPad is awake.
    Fred

  • I have the ishuffle 2nd generation. When I plug in, itunes recognizes it but it will not charge. The green light flashes a few times but then goes out. I'm not sure if the battery is dead or if something else can be done. Any advice?

    I have the ishuffle 2nd generation. When I plug it it, itunes recognizes it but the light flashes green a few times and then stops. It is not charging. Is the battery dead or can something else be wrong? Any advice??

    To rule out a problem with the shuffle's onboard software, I would try a Restore on the shuffle using iTunes.  The Restore button is on the shuffle's Settings screen in iTunes.  This will erase the shuffle, reinstall its software, and set it to default settings.
    If that does not help, you should do a test to confirm there is not a problem on the USB port, such as lack of power to operate the iPod and charge it battery.  Shut down (power off) the computer and disconnect all USB devices including hub, except for standard keyboard and mouse (if normally used).  If the computer is a laptop, connect its power adapter (so that it's not running on battery power).  Do this to reset the shuffle
    http://support.apple.com/kb/ht1655
    Start up computer, run iTunes, and connect shuffle to a direct USB port on the computer.
    If that does not help, it is more likely that the problem is a hardware problem on the shuffle, such as the battery.

  • When I plug in charger it says "Not Charging"

    Can someone please help me!?
    My phone battery died last night and when I plugged in my charger this morning and turned it on it said "Not charging".
    Some one please help me, its an emergency!

    Hi taha763,
    Welcome to the forum!
    What is the model of your device? Are you using the charger that came with the phone? What troubleshooting steps have you done to resolve the issue? You can try to use another charger just to isolate the issue. Let us know the outcome.

  • Why is it when i plug my iphone in to sync it says corrupt file and wants to restore my phone back to factory settings its happened five times now.

    Why is it when i plug my iphone in to sync,i get a corrupt file message cant sync.It wants to reset my phone back to factory settings and i lose all my phone.It has happened 5 times to me now.

    well, you probably have a corrupt file as the message indicates.  You will need to reset your phone back to factory settings as indicated. 
    If you've been using your phone as designed, you've been making frequent backups so that data loss will be minimal, if at all.
    Best,
    GDG

  • I have updated ipad3 to ios7 and now battery drains very fast even when not in use

    Why is my battery draining so fast even when I'm not using it . last night I put it down with 45% and woke up to dead battery. I upgraded to ios7 last week. I have ipad 3.thanks

    Hi!
    I have an iPad 3,3 GSM. I didn't update it since iOS 5.1.1. iPad works almost a week for me. And updated it to 7.1 at last Friday.
    After update my battery drains notable fast. ~10-12% overnight(~8h) in standby mode. I've tried to turn off parallax, all location services and background apps. But nothing's changed.
    So I''ve found that in usage section I ve almost the same values of usage and standby time. And I realized that one thing that drains my battery is "Find my ipad" service!!! I turned off it and my ipad works as with iOS 5.1.1:
    2% overnight max!! And now it's drained only 14% after 4h20m of usage with parallax turned on! (yes i've only surfed web and read a book but nevertheless)
    So it's your choice what to prefer - be sure that your ipad either protected from stealing or long battery life!

  • I cracked my IPad 3 that I got in April 2012, and I cracked it bad. What can I do? Please help'

    I cracked my IPad 3 64 GB in the top left corner with a line across the top half of the screen back in April 2012, a few days after I got it. But yesterday, my dog stepped on it and completely shattered the top white part of the IPad. The glass has actually chipped off, and now there is a big hole next to the camera. The IPad still works perfectly fine, in fact I'm on it right now, but the only thing is that the camera is a little fuzzy. I'm not sure what to do. I bought the IPad through apple.com in April 2012 and its been engraved with my name on it. I cracked it for the first time a few days after I got it, don't judge, and now it's a really really really bad crack. I googled what to do if you have a hole in your IPad, and didn't find anything, so hopefully someone can help me! I really don't want have to pay another $700 to replace the IPad, and my school uses them so my IPad is super important. I don't remember if I have any insurance on the IPad, but is there like an automatic warranty if you bought it within the last year, and it's your first offense? Thanks so much!!!!!!

    Hi Agutta,
    If you bought AppleCare for your iPad, then it has coverage for 2 incidents of accidental damage - $49 to repair. If you did not purchase AppleCare, you can take it into the nearest Apple Store to find out what the repair cost would be, or call Apple Support.
    Here's a link to the AppleCare site:
    http://www.apple.com/support/products/ipad.html
    Here's a link to the Apple Support site:
    http://www.apple.com/support/contact/
    Sorry about your accident! Hope it gets resolved....
    GB

Maybe you are looking for

  • How to populate Indicators in BW BEx report

    Hi All     My requirement is we have customised R/3 Report. in this report Status columns are showing Indicators like Green, Red, Yellow icons. How do we populate this data in BEx Report. I am planning to extract this data using Generic extraction bu

  • Help with buttons in gui

    I need to create first, last, next, and previous buttons in my gui. I have them in there (in the code), but only one button shows up (instead of four), and it has "first" overlapped with the "previous" button. The "next" and "last" don't even show up

  • BIREQU_* job consuming more time in R/3 Source system

    Hi Experts, I am performance issues while extracting data from SAP R/3, after upgrade to oracle. R/3 job BIREQU_* takes more time in selection of data. Particularly in step **02.08.2008 15:32:38 *******************************************************

  • Problem with Hashtable

    Hallo, I'm an undergraduate student of computer science at University of Bologna. I'm trying to implement an operator that use a lot of tuple and i don't want that all tuple reside in main memory. I have used the class java.util.Hashtable but i'haven

  • Copy and paste a page ?

    Hi everybody, and sorry for my English I am creating a page with different file /folders. Dos anyone know how can I copy and paste a page I will use in a different folder, and later I just change the links thanks for your helps Jose Felix