When i plug my iPod in, it does not recognize it...HELP
When i plug my iPod Nano 2nd Generation in to anything-AC adaptor or computer- it starts charging, then all of a sudden stops charging after about two seconds. When I plug it in to my computer, iTunes doesn't pop up like is used to. This started after i tried to use my sister's cable on it (It fit, but now it doesn't work with either). Please, if you have any suggestions, help. I've tried to reset it and everything.
Check these out:
iPod in My Computer but not iTunes
iPod Not in My Computer or iTunes
Check the Device Manager
I hope this helps!
Similar Messages
-
TS1425 itunes software locks up when I plug in ipod and it does not sync or appear in software?
iTune Software locks up when I connect my iPod Classic and it does not recognize iPod is connected and does not sync musice as it use to. Looking for ideas to try. Running updated iTune software and have reset iPod?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
It also could be due to a defective Lightning cable. Other uses have had problems with the cable. -
Hey guys, I need some serious help. I have an external hard drive, iomega which apears to no longer work; I am sure it is something I have done and I cant figure out what! I am certainly not a computer expert and am in Turkey so I dont have access to a MAC store for assistance or anything like it. Yesterday I plugged my external hard drive into my MacBook and got a message telling me to refotmat. I looked up how to do so and through disk utilities thought I did it right. Now when I plug in the hard drive my laptop does not pick it up; the only place it shows up is in utilities, the same place I tried to repair and reformat. When I am utilities it looks like I have 2 hard drives, one under the other. One tells me the description of the hard drive, the other doesnt really tell me anything. So I erased both of them and I think that is where my problem is. Any help on how I could fix this? I tried to "mount" the one that is not "mounted but it didnt work....I dont even know what that means!!! Help!
When you erased the disk did you select Mac OS Extended Journaled as the format option?
-
My Iphone is not seen on itunes when I plug it. I've tried everything that I found on the internet. but it still doesn't work, so I can't sync my iphone. What can I do? I have checked all the USB ports, I have desinstalled and installed again itunes, and I have run out of ideas.
When you plug it it, it should recognize it as an Apple IPHONE under devices. It will then bring the Camera/Connection wizard for the photos on the device. When you plug into different USB, it should bring the hardware wizard and tell you what its installing, what happens?
Under Device Manager, under Imaging Devices it will show up as Apple IPHONE. Is this being shown in your computer? -
My Computer has just had a new windows package installed and now my "Device is not recognized" when I plug it in?
Microsoft Office is a program you would need to reinstall again.
As for data backup if you baid 200.00 for a cruddy job for just picture backups and a reinstallation of Windows, thats pretty bad.
I would ask the technician where your data is. basically you want to ask if he backed up your User directory -
How can I fix my ipod coming up as USB cannot recognize device?
Did you find a solution?
My touch is doing the same thing. -
When I turn my iPod the screen does not turn with it :(
When I turn my iPod the screen does not turn with it >:(
Try here:
iOS: Not responding or does not turn on -
Hey, I need to download the OS onto my iPhone 3GS, however, when I plug my phoneinto itunes it does not give me the option to do so, I am currently running 4.2.1. Can anyone help me?
irapidslammz wrote:
I can not sync it because when I plug it in it says that the apple mobile service has not been started.
Type " apple mobile device service" into the search bar at the top of this page by Support and read the resulting help article. -
iphone 4 is not recognized by itunes and is only on emergency mode, keeps telling me to connect to itunes but when I connect iphone to computer it does not recognize it
Did you try recovery mode? Hold down the home button as you connect it to iTunes. iTunes should pop up a window that says "iTunes has detected a device in recovery mode" and give you the option to restore.
-
I purchased Adobe CS4. I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite. What can I do?
Contact support if you have serial number issues. Otherwise start by checking this stuff:
Sign in, activation, or connection errors
Mylenium -
having problems with adobe premiere 8 freezing. cannot playback my videos. also, when i try to burn to DVD, does not recognize burner. losing my work constantly cause of freezes and crashes.
sunchick116
Thanks for the reply.
Anytime I am getting too far ahead, then let me know and we can work together on putting the essentials together for this troubleshooting.
From your screenshot, you have a Windows 7 apparently 64 bit computer, lots of RAM. That computer would be great for Premiere Elements 11 Windows.
But Premiere Elements 8 is only a 32 bit application running in the 32 bit compatibility mode of your 64 bit system. So all that RAM is excessive in a 32 bit system with its limitation of max supported installed RAM being 4 GB (of which 3 GB or less of that are available).
So, the freezing and such could be explained by limited resources depending how much you have in the project when the freezing occurs and what formats are involved - like AVCHD. The burner not being recognized by Premiere Elements is probably another matter.
Let us start here....another place where you could be getting hit on the resource side of things....
1. Background Rendering and AutoAnalzyer features in version 8 are notorious for grabbing system resources. If you have them enabled, that could account for much of the program freezing. So, please make sure they are not selected.
a. Background Rendering. In the Premiere Elements 8 workspace, go to Edit Menu/Preferences/General, and make sure there is no check mark next to Background Rendering option.
b. AutoAnalzyer. In the Premiere Elements workspace, click on the Organizer tab in the row below the selected Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and uncheck all the option under that.
To get back to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace go to File Menu/Exit.
For most of us, Premiere Elements 8 was unusable without the 8.0.1 Update. Did you install that? Have you ever worked successfully with your Premiere Elements 8 on the computer where it is now? And, was that with or without the 8.0.1 Update?
Let us stop here and see how we are doing.
Lots of other factors to get into including the burner recognition one.
Thanks for looking at the troubleshooting comments.
ATR -
I already install Bootcamp 5 on my Macbook Pro MD101 (Mid 2012) but when I plug the USB, my Mac can not recognize the USB, also any storage device. Pls help !!! I am using Window 7
I ran an Apple Hardware Test, says ''No trouble found'.
-
hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me
Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone. -
My Ipod froze while downloading a software update from Itunes.. now I have a screen with an Itunes logo and the USB cord and my computer does not recognize the Ipod??
See Here for,
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591
And Here for,
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
Problem restoring my ipod. Itunes does not recognize ipod in recovery mode
The other day i decided to update the software of my Ipod touch to the latest version. The download went smoothly, later on while installing the new software an error message appear and the instalation was not completed.
Now my ipod is like a NEW ipod with the USB cable and the ITUNES logo on the screen. I tried restoring it but an error message appear 'error 1601'.
RIGHT NOW my computer and my itunes does not recognize my ipod. I think the ipod is in recovery mode.
PS: I already uninstall and install itunes.
Thanks in advance. I'm freaking out!!Already done that. The USB port is 2.0 and is on the back of my computer and i am not using any dock or external hubs. The cable i am using is the one that came with my ipod when i bought it.
I connected the cable to ALL the USB ports just in case the one i was using was not working properly but the error continued. I also check that the USB ports are not protected (meaning the USB port is blocked and recognizes the ipod as a virus). I also deactivated the firewall just in case it was blocking itunes or the apple mobile device support.
I've done everything and i am freaking out!! Please help meeeeeeeeeeeeeee!!!! thanks anyway lllaass
Maybe you are looking for
-
New Ipad mini will not connect automatically to home WiFi network
I use a range of Apple devices at home, IPhone 4, MacBook Pro and IMAC. They all see and connect automatically to my WiFi home network. I never experienced any difficulty with my DLINK router. I have received a couple of days ago my new Ipad mini (Wi
-
I can't see my old folios, that were created a year ago on the Folio Builder panel. Also I do not see "Show All" folios option on this panel. What I can do to fix the problem? Thanks, KK
-
IMovie '08 - Is it really that bad??
I purchased iLife '08 (and iWork '08) two days after they were released. And really, I have to say, I think that they are both well worth $80. There's been so much talk about the shortcomings of iMovie '08, and maybe it's just me, but it seems like A
-
Problem in BDC for selecting the QM View in MM02
Hi, I am facing a problem that when the material is entered select view screen opens and the positioning of QM view is 11 or 13 sometimes. i want the processing should of QM should be irespective of position. report ZBDC_MM02_QM_VIEW no standa
-
Hi, I've created a composite business rule and exposed as a composite, if i want to call reuse that business rule in multiple bpel processes, how can i do it? Any help would be appreciated, thank you :) Thx, Rahul venkat