When i plug my ipod nano into the computer it only shows the apple logo and dosen show up on itune. what do i need to do to fix this?
when i plug in my ipod to the computer it only shows the apple logo and dosent show up on itunes. What do i do to fix this?
First, make sure iTunes is correctly installed. You may want to reinstall it.
http://support.apple.com/kb/ht1925
If iTunes is installed correctly, hold down the volume down and sleep/wake buttons till you see the apple logo, then try again.
i
Similar Messages
-
My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
I plugged my iPod nana into my computer to charge it. I have a message on the iPod screen, "Connected Eject before disconnecting". What does this mean?
In iTunes, next to the iPod, there will be an eject icon. This safely disconnects the iPod from your computer.
-
I recently installed icloud on my computer, and now when I plug in my ipod touch it tells me "ipod can not be used because Apple Mobile Device service is not started". I can not find anything on my computer or my touch that seems to have anything to do with it. Anybody have any suggestions?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I bought my Ipod Touch today and I set it up with everything, even added a few game apps and my music. I plugged it in again and as it was reading "Evan's Ipod" , it cancelled and told me it could not be read and to reset it to its factory settings. I did and that didn't fix the problem. It's still telling me the same thing. Could anyone help?
Try placing the iPod in DFU made and then restore. If you get the same error time for an Appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I plug my ipod touch into the computer it just charges and won't appear on itunes!
when I plug my ipod touch into the computer it just charges and won't appear on itunes!
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
When I plug my ipod shuffle into my usb port, it no longer shows as a "device" over to the left. This makes it impossible to to transfer a new playlist to my ipod. Any suggestions?
Hi deaconspeaking,
Welcome to Apple Support Communities.
Try looking for the iPod below the Search field in iTunes. If it doesn't show up below search, the second article provides troubleshooting tips that should help you out.
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Click the button with your device's name, below the Spotlight window.
In the main iTunes browser window, select Music.
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
-Jason -
When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?
Hello Julia,
Start with this article.
http://support.apple.com/kb/ts1567
B-rock -
When I plug my IPOD touch into my Dell computer it comes up with Judy's IPOD, the click on where it says internal storeage then a folder comes up that says DCIM then click on that and another folder comes up 800AAAAA and when you click on that all you see if pictures. I am afraid to update the software on the IPOD I am afraid it will erase all my songs. Does anyone have any idea what the problem or can I update the software without fear of losing all my songs.
You have to follow these instructions. When they say restore from backup your iPod will also be updated.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
hi, when i plug my iPod mini into my lap top nothing shows up on my screen but yet the device still charges? help
Hello rkguy71,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Have a nice day,
Mario -
When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello People!
I'm getting an error message when I plug my iPhone 4 into my computer. It says, "This iPhone cannot be used because the Apple Moblie Device Service has not been started." What does this mean? I've never had this error before. It's also giving the same message with my iPod touch. Please help!
Thanks,
DanaGalYou can easily check whether you've the Apple Mobile Device in your computer.
Right click 'My Computer' , then Manage => Services and Applications => Services. Apple Mobile Device is listed in alphabetical order. If none, it means you've not download iTunes into your computer yet. If yes, please ensure the Apple Mobile Device is in 'Started' status.
Good luck -
When I plug my ipod touch into my PC, it is not recognized in file explorer
When I plug my ipod touch into my pc, it is not recognized in file explorer
It does (should) show up in Explorer on a PC. On a Mac it does not show up in Finder
Try:
iOS: Unable to import photos to computer
Have you installed any camera or scanning software?
If you have a camera, does the camera show when you connect to computer? -
Alright, I've had this problem for a while now, and I'm at my wit's end. Hope someone can help me.
First of all, I'm running Windows 8.0 on a Lenovo, using iTunes 11.1.5, and an iPhone on iOS 7.0.6.
Problem is, when I plug my iPhone 5 into my computer, the computer recognizes the iPhone, but for some reason, iTunes doesn't realize it's there. On top of that, every time I plug in, my phone gives me the same "Trust this computer?" prompt, like it doesnt recognize the computer I told it to trust 5 seconds ago. A couple times, I got lucky and iTunes dignified me with a "An iPhone has been detected, but could not be identified properly." prompt. I've tried uninstalling and reinstalling the mobile device driver, updating everything, uninstalling and reinstalling iTunes, resetting my iphone settings, but nothing works. Any ideas?iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
I had to rplace my hardrive, redownload itunes and I got my purchased back from itunes online! However, i am scared that if plug my ipod touch into my computer, is my music going to be erased? Help me please...
Yes, it will be erased. You need to first transfer the music to iTunes on your computer using a third-party utility such as Phone to PC | macroplant.com
Maybe you are looking for
-
Reinício de estratégia de liberação MM
Boa tarde pessoal, Estou com um probleminha que não consegui encontrar uma solução ainda com estratégia de liberação de pedidos (PO). Pois gostaria de configurar minha estratégia de liberação para que só reiniciasse a estratégia de liberação, o
-
Keystroke delay in Mail.app when autosaving
This is a very obnoxious problem I'm having in Mail.app. Apologies if it's been addressed elsewhere; kindly point me in the right direction if so. First, off: the specs. 2011 unibody Macbook Pro, 2.3 Ghz Core i5, 8GB RAM. Running Mountain Lion, 10
-
Matrixx 7 autocode does not generate ucb and subsystem wrapper for "procedures" code style
Under matrixx 6.1.3 when procedure style code generation is specified (-procs), autocode generates subsystem and ucb style wrappers (see below): Executing the command: autostar -l c -o "test.c" -d "/usr/local/apps/matrixx-6.1.3/solaris_mx_61.3/c
-
I was wondering if anyone out there could give me an idea of the benefit of moving my email from Thunderbird to Mail. Any ideas?
-
Deploying consumes a lot of memory on WLS (latest version)
I have a server with the latest version of WLS. It has the complete webcenter suite installed so it runs the adminServer with 3 managed servers. I have to do lots of deployments on that server and i notice that every time i deploy, the memory usage g