When I plug my shuffle in, it blinks yellow several times and then goes out. It wont charge
When I plug my shuffle in, it will blink yellow several times and then go out. It wont charge. I do not see this as a "warning" light in the PDF handbook. Any suggestions?
Hi aaliyafrommarkham,
In order to troubleshoot this, I would recommend that you start with an SMC reset. Information on this procedure can be found here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Thanks for coming to the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
unable to update to ios 5 on windows 7. please can someone help me i have tried everything? i deleted itunes and downloaded the new version when i plug my iphone 4 in it does a back and then I then everything runs normal and it extracts and then i get an error code at the end 3197. had the iphone for two months and its new.
Please can somene help me, i am currently on version 4.3.3 (8J2)
Modem Firmware 04.10.01followed someones instructions and it has worked ios 5 is now working on my iphone 4
-
I have the ishuffle 2nd generation. When I plug it it, itunes recognizes it but the light flashes green a few times and then stops. It is not charging. Is the battery dead or can something else be wrong? Any advice??
To rule out a problem with the shuffle's onboard software, I would try a Restore on the shuffle using iTunes. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, reinstall its software, and set it to default settings.
If that does not help, you should do a test to confirm there is not a problem on the USB port, such as lack of power to operate the iPod and charge it battery. Shut down (power off) the computer and disconnect all USB devices including hub, except for standard keyboard and mouse (if normally used). If the computer is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect shuffle to a direct USB port on the computer.
If that does not help, it is more likely that the problem is a hardware problem on the shuffle, such as the battery. -
Officejet 7000 network not recognized. Lights blink at printer connection and then go out
I plug in the network cable and the lights blink and then go out. The connection to the router is not established
Ok,
First, unplug both the printer and the router power for 30 seconds and check for any change,
if the same persists, try plugging the ethernet cable from your printer to your PC and check if the same behavior occours.
If so, than it seems like the printer eternet card is damaged, which will require service
If it is connecting with your PC, so the issue may be related with your router,
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
how can i sycn my iphone to iturn my ipod will but not the iphone?
That's nice, the device is listed on your Apple profile.
That has absolutely nothing to do with syncing to a computer.
Try a different USB port.
Restart the device.
Restart the computer. -
Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully receivedTry using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie -
if i use firefox and open tabs, the moment that i go back to the facebook tab, it would take firefox 5-10 seconds to open the facebook tab.it's really annoying
That is most likely caused by Firefox releasing memory used in that tab to minimize the memory that is currently in use.<br />
This includes memory that stores the DOM tree and that tree needs to be rebuild to allow navigation scrolling and clicking items on the page.<br />
On complicated pages that have a lot of elements this can take a few seconds.
See also:
*http://blog.kylehuey.com/post/21892343371/fixing-the-memory-leak about:khuey - Fixing the Memory Leak -
HT3964 when I try to play a CD, it waits 30 seconds and then pops out
I can't seem to play a CD, it pops out after 30 seconds
There are many reasons why this happens and I don't have enough to do with the music side to give you an answer. But ... I picked up on this excellent and most thorough set of observations by shldr2thewheel. I hope he won't mind me mentioning them.
cd drive ejects disc without...: Apple Support Communities -
When people call my phone it only rings once and then goes silent until voicemail picks up?
Is anyone having a problem with their voicemail on Iphone 4s. When people call me it only rings once on their end and then goes silent until my voicemail picks up?
Then get your iPhone checked out by an Apple Genius.. Or you can go online and Apple will check out your iPhone with an App sent via email.............
-
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
-
When i plug my shuffle into my computer nothing happens, in doesn't sync or anything. But i plugged it into another computer and something popped up asking me if i wanted to sync my ipod. what is wrong with it?
Is it recognized by iTunes? If not the following may help:
Windows: http://support.apple.com/kb/TS1538
Mac: http://support.apple.com/kb/TS1591 -
When I plug my shuffle into my PC it says in iTunes that it is syncing, but when I safely disconnect it from the PC and plug my earphones into my shuffle it says I need to sync music from iTunes. What should I be doing differently?
Copy everything from the old computer or your backup copy of your old computer to your new one.
Type "move itunes library from pc to mac" or similar into the google search bar. -
Here goes. My iPod touch has all my songs on it. I have changed computers several times and iTunes has a library of similar but not as many songs as iPod. When I plug iPod in ans go to sync it says that iTunes library will replace iPod songs. I don't want this to happen I want the I pod songs to sync with iTunes. What do I do?
That really does not work since music is not included in the backup. See:
iTunes: About iOS backups
puttly123 wrote:
backup your ipod. then sync your ipod to the computer, then restore your ipod and it will still have the right songs. its exactly what i had to do with mine. -
When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!
- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod. -
my iphone4 has a broken lock screen button. im struggling to turn it on, when i plug it in it keeps restarting showing the apple sign then turning off again. any ideas how to fix this problem?
That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!
Maybe you are looking for
-
Canon printer / unable to print a brcode / print preview ..
Hi , After all those sdn searching and googling i still not in the correct way Barcode is not getting displayed in either print preview or in print output . 1. SAPSCRIPT-BARCODETEST - (so10) standard text is displaying barcode in atleast in print pre
-
Installing SAP GUI on windows using Bootcamp on (MACBook)
HI SDN, I am looking forward to buy MACBook. Please provide your suggestions on installing SAP GUI on windows using Bootcamp on MACBook? Are they any issues installing SAP GUI on Mac machine on Windows OS? Running Bex Queries, any excel integration i
-
I can't get my "String.valueof()" working
Hello, I'm trying to create a method to search a string for a char with an if statement. I have created the following but it won't compile anyone know where I'm going wrong? public String string0 = "AEHIOUWY"; public char getCode(char aChar) if (stri
-
Help Required @ some real time application developement help!!
I have just started off with Jdeveloper and I need some very much real time examples so that I can give a head start and do applications as soon as possible can anyone show me the links to files and I will make the application learning where and when
-
Frustrated trying to print from Canon Pixma 9500
Does anyone have any tips for printing from Canon Pixma 9500? I profiled the screen, printer and paper using colormunki. Trying to print from photoshop. Frustrated that the printer interface isn't as described in many online forums (for example, it s