When i plug the USB for my iPad into my computer it will connect then disconnect over and over again untill i wiggle the usb around alot. This is happening to all my ports. But not on the other computer.

Hi. Whenever i plug my iPad (Happens with ipod and iphone too) to my computer usb for itunes is will connect, then disconnect over and over again. It has happened for a long time but doesnt happen on my other computer. how do i fix this?

If you have a spare cable, try using that.  But the fact that this doesn't happen on your other computer (I assume using the same old cable) leads me to conclude that something else is at work.  Maybe even the "bad" computer.

Similar Messages

  • ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

    iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

    Could just be a loose connection or that the cable itself is going bad.  There are a number of factors that could play into this scenario.
    B-rock

  • When I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

    when I plug in my iphone5 or iPad into my Mac I get the message iTunes could not connect the service did not start properly on this device

    If you are using Windows 7, go to:
    Control Panel>Programs>Programs and Features
    Look for a program called 'Apple Mobile Device Support'
    Right-click on it
    Click 'repair'
    Wait until the repair operation is complete, and voila, your problem should be solved, itunes will recognise your iphone/ipod once more. This worked for me.

  • I have been experiencing connection issues with loading web pages. It's as if the web pages do not want to load all the way and some times not at all. This has happen with all three of my computers with the same browsers.

    There are times when web pages do not want to load fully and other times not at all. They just continue to open up with a blank screen. My routers light flash during this process and then they stop as if no connection is being made. I do know for sure it is not my ISP or internet explorer browser.
    Thank you,
    David [email protected]

    I continue to have this problem and have tried all recommendations so far...I notice also when I click on a web site on the taps side of browser once it starts loading however it does not connect, web site comes up just blank while it continues to search. The same thing happens while in an email program with clicking in the email link and page pops up and continues to search for the web site. You have to reload over and over again until it finally locates it and then opens. Should I uninstall the Firefox browser and install again.....?

  • New Mail in GMAIL shows up in the ALL Mail folder but NOT in the Inbox

    Recently my iPhone 3G began looking at my gmail account and was not pulling the mail down. So I had to go web based to see if there was anything in my mailbox. I don't know if the problem is that I have this same account with the mail app on my mac and I may check it on the web, iphone or on my computer and it's possibly confusing the system. Very frustrating because I have to check my mail twice, in different places, just to make sure I didn't miss anything.
    Hopefully this was clear and thanks for any help
    C

    DId you try, settings, notifications?
    under your gmail or whatever mail you have you can choose to fetch every 15 minutes, hour, or manually. Sounds like you are on manually, when you open your email.
    MAnually does save battery though.

  • I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

    I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

    How are you trying to play them, in the iTunes store or the Music and Videos apps ? Downloaded and synced music and videos should be in the Music and Videos apps, and you can stop content that is only in the cloud from showing in them via Settings > iTunes & App Store > Music and Videos 'off' (under the 'show all' heading).
    If you don't have your music and films/TV shows in those two apps then you should be able to download them into those apps via the Purchased tab in the iTunes store app.

  • When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    When i plug my 3rd generation ipod touch into my computer, itunes doesn't notice it, and the computer says it is just a digital camera. i can only see the images on it. Can anyone help?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

    When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

    Hi dones49,
    It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
    To find the file, use the information in this article to navigate through the iTunes media folders -
    Locate and organize your iTunes files
    If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
    Download past purchases
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have recently bought a Seagate Goflex satellite mobile wireless hard drive. I have converted some of my AVI movies to mp4 and transferred them to the hard drive, but when I play them through my iPad 2 I can hear the sound but not see the movie. Help???

    I have recently bought a Seagate Goflex satellite mobile wireless hardrive , i have converted some of my AVI movies to MP4 and loaded them onto the hard drive, when I try and play them through my I pad2 I can hear the sound of the movie but not see the film, somebody please help, what am I doing wrong as I have spent a lot of time converting these movies to be able to travel with my iPad and watch them. Thank you

    Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
    While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
    It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

  • I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?

    I think that we all understood what you meant. If the extension cord is no longer working, then return it.
    We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
    Edit - one upped by the lovely lady with the pretty kitty avatar

  • HT1844 Library Issue:  I just imported 2 CD's into ITunes.  They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.

    Library Issue:  I just imported 2 CD's into ITunes.  They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.  They show up in the search box, but when I click on the results it just kicks me to ALL my music.  I have imported thousands of songs/CD's before and this is a new one.

    Something may have gone wrong with the index of the Music playlist. Making another change to the library such as downloading the current iTunes Free Single of the Week, or deleting one track from your library and reimporting it, should fix the problem.
    If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up which ought to correct things.
    tt2

  • HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do n

    I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I'm using a Rocketfish USB to Lightning cable for powering my IPAD2.  But when I plug it in the battery icon beeps and comes on then goes off...then goes on...then goes...all beeping every time.  Its as if its being unplugged and plugged in over and over.

    I'm using a Rocketfish USB to Lightning cable for powering my IPAD2.  But when I plug it in the battery icon beeps and comes on then goes off...then goes on...then goes...all beeping every time.  Its as if its being unplugged and plugged in over and over.  It won't stop...and its not charging....just beeping.  I've check connections.  Any ideas?

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • My Dell computer is not recognizing my photo album when I plug it in via USB. Keeps asking me to "Trust this Computer" over and over. How do I get this to stop?

    My Dell computer is not recognizing my photo album when I plug it in via USB. It keeps asking me to "Trust this Computer" over and over. How do I get this to stop?

    your phone is in recovery mode, which means your data is already lost.  hopefuly you've been keeping regular backups

  • Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

Maybe you are looking for