When I press 0 I get the number 9

When I press the numeral 0 (zero) I get the number 9.  Can I rotate the screen sideways like an iPad or any other work arounds?

Hey WShimet,
I found the following troubleshooting steps for when your touchscreen is giving you issues:
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
via: iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
Welcome to Apple Support Communities!
Regards,
Delgadoh

Similar Messages

  • I connect my iphone 4 to my itunes and when I press update to get the new iOS 7 software, it says "This version of iTunes (10.6.3) is the current version" and it tells me to press ok. Why is my phone not updating??

    My phone says it is connected to itunes and beside the update button it says "a newer version of iphone software is available (version 7.0)...." but when I press 'update' a box pops up that says ""This version of iTunes (10.6.3) is the current version" and then I press okay and nothing else happens. I'm getting frustrated. if anyone can explain to me why I can't update please tell me! Or else I'll have to call up Apple I guess.
    thanks!

    You have answered your own question:
    "requires 10.6.3 or higher"
    " i upgraded my itunes to 10.5 "
    You need itunes 10.6.3 or later.

  • HT4314 Game Center problem. When I try to start a new Letterpress game, I get the message "Unable to create match please try again later. When I press "OK" I get the following message, " Error starting game. The requested operation could not be completed

    ...I get the following message, "Error starting game. The requested operation could not be completed because local player has not been authenticated".
    Can anyone advise me how to resolve this please?

    You should contact the developer of the game for assistance.

  • When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it.  How do I get my phone to default to phoneing a landline?

    When I press on a land line number, the phone does not call the number, but comes up with a screen to send a text to it.  How do I get my phone to default to phoneing a landline?  When I press a mobile number in contacts, the phone automatically phones the number.  I do not mind this as I hardly ever send texts, but I would like to have the option of what to do.  This seems such an obvious issue but I can not solve it even with much web searching.  Thanks!

    I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into.  Dumb or what? 

  • If I get a text on my iphone do dose my mum when she don't even have the number

    I get a text from my friend on my iPhone but then my mum gets it as we'll when she doesn't even have the number?   Help if u know how to fix this 

    Use your own Apple ID.
    Settings > Messages > Send & Receive > here

  • TS3048 When I press 1 I get a q and a 1.  When I press q I get a q and a 1.  This carries on all along the numbers and first line of letters. Help!!! Wireless keyboard.

    When I press 1 I get a q and a 1.  When I press q I get a q and a 1.  This carries on all along the numbers and first line of letters. Help!!! Wireless keyboard.

    https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

  • How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?

       How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?  As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.'  So, it plays next, but then the song after that is back in the old playlist.  I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue.  This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
       Thanks.

    At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
    If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

  • Date - how to get the number of the week

    I have a Date - string - w/e can be convered thats not the problem
    but how do I get the number of the week cuz the database holds events per week so I need to know the number of the week.
    I tried going true the api but I failed to find the right fuction, aldoh I recall seeing it somewhere a while ago.
    anyways got a deathline so easy dukies, first come first serve.

    how's this then?int weekOfYear = 0;
    SimpleDateFormat sdf = new SimpleDateFormat("yyyy/MM/dd"); //your String format
    Date date = null;
    String dateString = "2003/06/16";
    try {
      date = sdf.parse(dateString);
    } catch (ParseException pe) {
      //hande bad date format
    if (date != null) {
      GregorianCalendar calendar = new GregorianCalendar();
      calendar.setTime(date);
      weekOfYear = calendar.get(Calendar.WEEK_OF_YEAR);
    Warning: Be careful of your locale settings when using week of year, you may need to investigate setFirstDayOfWeek(int value) and setMinimalDaysInFirstWeek(int value) to ensure you get the results you expect.

  • FORMS 9i issue: Is there a [b]SYSTEM build-in to get the number of records?

    In master-detail data blocks, a query generally return multiple records from the detail table. I'd like to know how to get the number of the records:
    1. I use NEXT_RECORD to navigate these records
    2. use SYSTEM.CURSOR_RECORD to know the current record
    3. use SYSTEM.LAST_RECORD to know when the last record is reached.
    What is missing is the total number of the records.
    Thank you in advance for helping

    My tip would also be the summary item

  • How to get the number of issued active certifcates from a CA

    Hi,
    We have a PKI infrastructure still running on Windows Server 2003. How can I get the number of active certificates issued?  I have used the filter option on the issued certifcates node listing the certificates with expiry date after the current
    date, but this list only all the certs without the actual total number of certs.
    Any help is appreciated
    Thanks
    Johan Marais
    JkM6228

    On Wed, 22 Jan 2014 08:57:59 +0000, Martin Rublik wrote:
    certutil -config -view -out "Issued Distinguished Name" -restrict "Certificate Expiration Date > 22. 1. 2013" | findstr Rows
    It will dump CA database look for issued distinguished name (name in the subject of the certificate) and outputs only certificates expiring after 22.1.2013. The output is piped to findstr command that filters the total number of rows.
    There are a couple of problems with the above:
    1. Not every certificate will have a Subject name.
    2. This won't filter out certificates that have been revoked but are still
    time valid.
    3. I couldn't get the "findstr Rows" to return anything and when I look at
    the help for findstr I don't see that as an option for the command.
    This command worked for me, make sure you enter it all on a single line:
    certutil -view -restrict "Disposition=20,NotBefore<January 22 2013" -out
    SerialNumber | findstr /C:"Serial Number:" | findstr /r /n "^" | find /c :"
    Also, if you copy and paste from this post into the cmd window, be careful
    that the quotes and dashes don't get converted into the wrong type.
    Paul Adare - FIM CM MVP
    "for thing in $(fnord $(frob $(./gazonk foo bar baz bletch thud grunt)));
    do
    zot --wodchuck ${thing}; done"
    -- Stig Sandbeck Mathisen making a point about the beauty of shell scripts

  • How to get the number of rows in a repeating frame ?

    Hi all,
    When I launch a report from forms then sometimes there are data in the report and sometimes there are no data. And the problem is that when there are no data then the frame containing the repeating frame is still displaying and a blank page displays on the report.
    So I want to get the number of rows from the repeating frame so that I can code a format trigger on the frame to display or not the enclosing frame depending on the existence of data from the repeating frame.
    Thank you very much indeed.

    Dear Friend,
    You can achieve this. Define a summary column (say cnt). Select summary type as "COUNT". select any one of columns that are getting displayed in your repeating frame as summary column and provide "reset at" group name (or set this to report if you are defining this field at report level) . This "cnt" variable will contain how many records that will be fetched for your repeating frame (i.e. Group of Repeating frame). You can use this "CNT" variable in your format trigger.
    In this case there is no need to write before report trigger or anything.
    Regards,
    Manish Trivedi

  • How to get the number of rows in a DB-Cursor

    When i open a database cursor i do not know how much rows are stored in the cursor. To solve this problem i have to send a 'select count(1) ...' to get the number of rows before i set up the cursor. I think that this is not very clever and could possibly cause performance problems. But i need the num of rows to show the percentage of processed rows. Is there any other way to get the num of rows? May be by checking the cursor directly?
    Please help!
    Thanx a lot

    In order to find out how may rows are going to be processed, oracle has to visit every row. So with a cursor, there is no property that will accurately reflect the number of rows until you get to the last one. That said, you could use
    select count(*) over() as row_count, <rest of your columns> FROM <your table>
    which will give you the total row count agaist each row in the result set. There are performance penalties involved but they will be less than issuing the query twice, once to get the count and once to get the rows.
    Have a look on asktom for some very usefull info about all this.
    HTH

  • How to get the number of rows in a ResultSet

    Hello,
    I'm an intern and I'm trying to get the number of rows from result set in oracle using rs.last() and rs.beforeFirst() methods
    but I got an error. Could Below is my sample code:
    import java.sql.*;
    public class SarueckConnect {
    public static void main(String[] args) {
    Connection con = null;
    Statement stmt = null;
    ResultSet re = null;
    String[] ParamArray;
    ParamArray = new String[24];
    //Properties logon;
    try {
    Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
    con = DriverManager.getConnection
    ("jdbc:oracle:thin:@258.8.159.215:1521:test_DB","data","data"); //making the connection DB.
    stmt = con.createStatement ();// Sending a query string to the database
    //stmt.executeUpdate("UPDATE test_table set steuk = 6 WHERE steuk = 5");
    ResultSet rs = stmt.executeQuery("SELECT mandt,kokrs,werks,arbpl,aufnr,vornr,ile01,"+
    "lsa01,ism01,ile02,lsa02,ism02,ile03,lsa03,ism03,ile04,lsa04,ism04,steuk,matnr,budat,"+
    "kostl,pernr,rueckid FROM test_table where steuk =6");
    //Print the result out.
    rs.last(); //This is the line which gives an error.
    int rows = rs.getRow();
    rs.beforeFirst();// I presume this is wrong to.
    ParamArray = new String[24*rows];
    int counter=0;
    while (rs.next()) {
    for (int i = 1; i <= 24; i++){
    ParamArray[i-1+(counter*24)] = rs.getString(i);
    System.out.print(rs.getString(i) + '\t');
    System.out.println();
    counter++;
    } catch(Exception e) {
    e.printStackTrace();
    } finally {
    try
    if(stmt != null) stmt.close();
    if(con != null) con.close();
    } catch (Exception exception) {
    exception.printStackTrace();
    TryBapi sap = new TryBapi(ParamArray);
    }When I run the code I do have the following ERROR Message:
    java.sql.SQLException: Invalid operation for forward only resultset : last
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
    at oracle.jdbc.driver.BaseResultSet.last(BaseResultSet.java:91)
    at SarueckConnect.main(SarueckConnect.java:28)Please could any body Help me out here to figure out how to correct this?
    Any Help would be highly apprecited.

    make your result set scrollable...Not such a good idea. With Oracle, the JDBC driver will read and cache all the ResultSet in memory (with other DBMSs/drivers the behavior will probably be different, but you will still have some unnecessary overhead).
    You can do the caching yourself if you think it's worth it. If the piece of code you posted is why you need this for, then use a List or Vector and you won't need to know the size upfront.
    Alin,
    The jTDS Project.

  • How to get the number of my songs, videos listed?

    How can I get the numbers of my songs, and videos, and podcasts listed in the "About" section (Settings> General> About>)
    I get the number of applications listed for apps and photos, but despite having videos, podcasts, and songs on my iPad they are not indicated as 0!
    I have iPad1 with 32GB, but get only 29GB as capacity listed in the "About" section. This basically means the iPad OS is using 3GB of space, wow is this correct!

    I don't know of any settings.
    You can try a reset: Press and hold the Home and Power buttons for 10 seconds until the Apple appears. Then allow the ipad to restart and then recheck the count of files.
    Not sure why the ipad takes up differing amounts of memory. See if it changes with the reset. I don't think it will, but I don't know for sure.

  • How to get the number of bytes at TCP port

    Hi all,
    How to get the number of bytes to read at the TCp port...as someone had suggested in some forum we do read the number of bytes first and then pass this...
    but we get a problem when we have FF data in this...because then it sends 2 FF data...and cause of this we skip the last data...is there any solution for the same?

    Hi
    In LabVIEW you don't have the same property as in serail port.
    You havn't "Byte at TCPIP port".
    if you developp a protocol, one soltion, is to send the size to read.
    Ingénieur d'Application / Développeur LabVIEW Certifié (CLD)
    Application Engineer / LabVIEW Certified Developer (CLD)

Maybe you are looking for