When I press 'Low Latency' button I only have audio coming through left channel ?!

When I press 'Low Latency' button I only have audio coming through left channel !?
When you take it off 'Low Latency' mode the audio is fine and comes out Right and Left speaker.
Can anyone please advise why this happening and how I can fix it ?

I think Pancenter is trying to get you to read and understand the "Working in Low Latency" section of the manual as the results or problems with working in Low Latency mode are variable.
This section, for instance:
Note: The sound may change in Low Latency mode. Depending on the plug-ins in use, the changes can be anything from subtle to dramatic. If plug-ins being used do not exceed the total latency limit, there will be no audible difference.
If it was me posting about this issue I would now come back with what exactly is inserted/bussed on the tracks because it could be an accumulative problem based on what plug-ins you have active and if they are on audio tracks (stereo or mono), instrument tracks etc. Lots of variables. The section of the manual quoted above won't give specific instances as any user could be using any combination of any amount of plug-ins.
So more information is needed before anyone can help you any further.

Similar Messages

I have a scarlett solo usb mic interface that only records audio to the left channel in quicktime.

When I record a movie using my web cam in conjuction with my scarlett solo usb mic interface it only records audio to the left channel. I have tried everything and looked everywhere! Any help would be appreciated.

Maybe:
Quicktime Input is always mono?
how can I make a stereo recording in QuickTime?

Why is does audio only come out of the left speaker when I press the latency button....?!?!

Hello
I have a small problem which I hope someone can advise me on ......
Everytine I press the Latecny button on Logic 9 the audio will stop coming out of the LEFT and RIGHT speakers and only come out of the LEFT speaker ?
Audio sent out of DAW --------> Mixng Deck ------> back into Soundcard via SPDIF (digital) on inputs 9/10
I am sening al my sounds out of the computer to be summed on a mixing decks and then the 2 channles of audio from the deck is coming back into my soundcard as an digital a signle on INPUTS 9/10.
Can anyone please advise ..........!?!

Might want to read on what Low Latency mode does + why and when you should use it.
It's basically only used in realtime monitorinr when recording and/or when recording softsynths.
By reading the docs you should be able to figure out why the right side is being muted.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=41%26se ction=2%26tasks=true
Be sure software monitoring is Off when recording the summed input.

My iPhone only outputs audio on the left channel.

Randomly and without changing any settings, my iPhone has started only outputting the left channel of stereo audio, i.e. when I play a song on it I only hear it through the left channel. I've tried different sets of headphones, same story. Also it has stopped responding to volume changes via the inline remote - play/pause still works....
What could be wrong??

I am getting audio output from only my left earbud. However, the volume control mounted on the right channel cable is functioning fine. I plugged in another set of earbuds and they seem to work fine.
Can anybody help? Or do I have to visit the Apple store for a replacement of earbuds?

My screen is stuck, it doesn't want to go back to the home page when I press the home button

My screen is stuck, it doesn't want to go back to the home page when I press the home button. I have to power it off then turn it back on.

808babe-
One thing to try, is to reset (reboot) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
If you can not do this reset, you may have a defective Home button. Have an Apple Store Genius look at it, and you might get a new iPad.
Fred

Pressing the "low latency" button isn't bypassing FX on Master channel...?

Hey Everyone,
I love the "low latency" button on the transport bar, it's great when you have a channel full of complex effects, and you press the button and Logic chooses to ditch one or two effects (and turns them orange in that channel so you know which ones!) so you can have low-latency feedback while you record.
But the other night I was doing some recording on a channel with a few effects. However, on the Master channel, I had about six or seven effects.
There was a considerably lag when recording and using software monitoring. I thought pressing the "low latency" button would do its usual magic. It didn't!
So my question is... does this feature only drop out effects on the channel that you're using, and not the Master channel (even if the Master effects are going to cause a significant lag?)
Cheers,
Mike

Hi Mike,
Low latency does not work on master... now...
in the previous Logic 8 versions 8.0.1 it was working...
I really don't know if is a Leopard behavior
anyway
Same here... it does not works on Master plugins

I am having the problem when trying to take a panorama picture. It may only take the first frame or doesn't even start at all when I press the shutter button. even though when i hold the phone straight up and down, so that camera is at the top

I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?

To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back.

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown

whenevenr I call a person sometimes the phone gives me an option of callback and end when I press the callback button the whole screen goes blank and only the upper Taskbar where it shows network provider , time and battery percentage is shown

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red (-) to delete all apps from this list.
- Press the home button twice when done.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?

I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?

Press and hold Home until it beeps.
Then let go and speak. Or contune to hold and speak and let go when finished speaking.

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!

You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac

Ever since I updated to iOS 8 on iPhone 5, sometimes when I press the home button just once it will open the app switcher or even the assistive button. Anyone else have this problem? Is it an iOS 8 glitch? Please help - very annoying.

I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.

Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip..

HT201401 When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't h

When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.

Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

Ipod distorting music when i press the "Menu" button.

When i press the "menu" button and sometimes when i just touch it the now playing song distorts... really crap sound too.. Any help would be greatly appreiated. Thanks.

no, it didnt work, the distortion has just gotten worse. I am hopeful that the warranty will hold out since ive only had it since christmas

Why does my 4s keep returning tot the boot screen (apple logo) when I press the home button to see the lock screen?

3 or 4 times since I first fired up my iPhone 4S yesterday, it has displayed the boot screen (apple logo) when I press the Home button to display the lock screen. After 10-20 seconds the phone displays the lock screen, but at that point it has to search for a cell signal (as if the phone just booted up), which takes another 20-30 seconds.
Is anyone else having this issue?
Another thing that has happened only once, but that seems related, is that when I clicked the lock button on the top of the phone, the phone displayed the spinning circle that usually displays when an iPhone or iPad is shutting down.
Any ideas on what MIT be causing this?

Disk repair hasn't worked as well.
I just wanted to add a quick observation: after I tried the TM restore for the first time, Safe Boot in verbose mode seems to be stuck at this line "VBoxAdpDrv: version 3.1.0 r55467". This may point to the problem being a Virtual Box problem.
I use Virtual Box extremely rarely - haven't used it in many months. After a re-install, I'm going to remove it and then try the upgrade. If it works, then we've probably found the culprit. If it is real, Apple should maybe add a line saying Virtual Box known to cause problems with this upgrade (or fix it ).

When I press 'Low Latency' button I only have audio coming through left channel ?!

Similar Messages

Maybe you are looking for