When I press the power buton to turn on my ipod it shows the last song I lisend
when I press the power buton to turn on my ipod nano 6g it always shows the last song that id lisend
I use my ipod as a watch (band for ipod nano) so I would like it to turn on on the clock
MacBook Air Mid 2012?
"Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. These systems were sold between June 2012 through June 2013."
http://www.apple.com/support/macbookair-flashdrive/
Similar Messages
-
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?
Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
..Step by Step to fix your Mac -
I can not make my mac book pro can turn on,when I press the button of power ,there is no response, I can not make my mac book pro can turn on,when I press the button of power ,there is no response
Maybe some help here:
http://support.apple.com/kb/TS1367
http://support.apple.com/kb/TS1365 -
Hi
I have recently bought a white iPhone 4S on Tuesday, and it has been repeatedly loosing all connection and just suddenly switching off.
When this happens I am unable to turn the phone back on again without a power source plugged into it. When I try to remove the phone from the power source it goes completely dead again.
However, the most recent time this has happened (today), as soon as I returned home the phone had no problem starting up as normal when I pressed the power button.
The signal was working fine even though it says 'searching' in the left hand top corner of the screen. I am wondering if my WIFI at home is influencing the phone to work inside the household?
This is a problem that needs to be sorted out ASAP because the phone is not working the majority of the time when I need it to.
Please if you have any suggestions or know the cause of this problem inform me straight away.
Would be much appreciated.
Thank you.Try connecting it to your iTunes library in Recovery Mode and restoring it. See this article for help on getting your iPod into Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock -
Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
TerrenceHey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
iPad 2 has a black screen which lights up to a grey black screen when I press the power or home button but I dont see the apple logo. The battery is fully charged and when I plug it in to my computer, I can use iTunes to do everythng except backup the iPad since its passcode locked. Please help me resolve this problem. I don't have apple care
Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.
-
My Ipod touch is acting very annoying. When i press the sleep/wake button to turn it on it just turns on with the apple logo and stays there. The screen will then blink white occasionally and the process will start again. Once when it turned white. i pressed the power and home buttons at the same time and then the above process continued.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
when i press the power button and the "home" button it lights up the screen. however.... the screen is magnatized like 300% percent. and i cant open it or anything becasue it wont let me move the screen!!! what to do??
Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.
-
ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?
roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work -
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done! -
Help, my iphone 5 is locked and will not function! I've turned it off and on and it has the same fault. What ever you press on the screen highlights with a box round it. When you press the round button with the square in the centre the voice on the phone tells you the time. Then the voice says screen lock. If I try and unlock the phone the voice says phone unlock but you can't put the code in. If you hight the box it will say the number but not put the code in?! What's the crack?
Quickly Triple tap the home button to de-activate VoiceOver.
-
I have a 24 inch early 2008 iMac. To power it on, I have to unplug it, wait 30 seconds, plug it back in, hit the power button, and hold the button for exactly 6 seconds after it starts to whir before releasing it. When I press the power on, unless I hold it for exactly 6 seconds, it abruptly aborts the powering up cycle in a few seconds more. Also, if its been off for a while, even if I unplug it, and plug it back it, it sometimes spontaneously starts the power up cycle, but aborts it in a few seconds. I've had to do this for the last two years. In that interval, has been completely reformatted and restored once . For perhaps one or two weeks, it powered up properly, than reverted to the state described above. The Genius Bar hasn't been able to help. What's up with this?
This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
http://support.apple.com/kb/TS2570
https://discussions.apple.com/docs/DOC-5282 -
When I press the power Btn Nothing happens ... Help please
When I press the power Btn on my Hp Pavilion Slimline desktop,.... the power light on top comes on (While looking in the case,......the 3 fans - CPU/Power Supply/case fan when powered, they begin to whir.......However, after 7sec the CPU and Case fan stops and the power supply fan is still running,,
But NOTHING HAPPENs..... no display , no hard drive running nothing...
PLease Help ....
Thank youThe basic tests required (generic example) can be found here. It always help to mention the exact model #.
Symptoms you related usually mean the PSU has failed. You can read this commentary for explanation and a lead to a new PSU.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
Maybe you are looking for
-
My laptop was stolen that had my itunes installed and was synced with my ipod classic. I now have a new laptop. Is there any way I can transfer ALL the music from my ipod to itunes on the new laptop, not just the purchases? I don't have access to all
-
Script issue with multiple lines printing
Dear All, I'm trying to print multiple lines of my internal table in a script. But only the last line is being printed all the time in all the lines. Attached is my code. CLEAR GS_REGUP. LOOP AT GT_REGUP INTO GS_REGUP. * Start the Form
-
Binding xml form with automation in pro 8.1?
Hi guys, im using COM automation to control adobe pro 8.1 to load a pdf document, and bind an xml file with the form. (the pdf has a datasource attached to it, fields are binded and the preview from livecycle desiner works fine). anyone know how i ca
-
Getting unknown error when trying to make a purchase
Hello All, Whenever I attempt to make a purchase for a song or a video/TV show I get an unknown error. Does anyone know why? I did restart my computer and all. Thanks for any help.
-
Why is MME playing much better than ASIO4ALL
I have a 64 bit acer Aspire R7 with 8GB RAM and runing windows 8.1. i have bin using adobe audition(now using CS6) for about 10 years now and i have never found myself havin this problem: 1)It so happens that my MME drivers are giving less glitches t