When I pressed Apply button after autoupdate, i get window reading as connecting to server and it goes on for hours together and no end and no further message.

I proceeded to update automatically and the I got the window to apply. I clicked the "Apply" button. The browser closed and reopened immediately, and my antivirus asked me whether to allow the software. I clicked allowed. Then I got the window reading as "Connecting to server etc.". I was waiting for further development. But this window keeps on showing same message without any progress even after I kept the same opened for nearly1 hour.

If you have problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Similar Messages

  • Lately, i received "search setting notification" message popup on starting Firefox 3.6.10. I manually changed my search to Bing. But after closing all firefox windows, it was changed to Yahoo and that notification message.

    I am referring to the Search Bar on the upper right corner of the firefox screen. Where there is an option to "Manager search engines...". I even delete the Yahoo entry. But when i restart firefox, i got that "Search Setting Notification" message and the #[email protected]? Yahoo is there on the upper right corner as my default search engine.

    (1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
    You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
    If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
    (2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
    orange Firefox button (or Tools menu) > Options > Privacy
    * The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
    * The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
    Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

  • How to open new window when i press submit button/submit button.

    Hi,
    When i press a button, I need to capture an item value in current from and I need to pass that value to another form. The child form should open in the new form.
    For that Iam using the java script, But when i use the java script my page is not able to re-size, scroll bars address bar and menu bars are missing. if any one did this kind of requirment please share with me how to solve this issue.
    Thanks

    Re: How to show Popup window in OAF on click of a button
    Thanks
    --Anil
    http://oracleanil.blogspot.com/

  • MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    MY iPhone 4 after  being updated to iOS7 will not download or update any apps. When i press the button on my device to download a new app the loading wheel appears then in a few seconds disappears. I dont get a terms and conditions screen or anything.

    Ive tried using wifi and 3G seperately. Ive tried restarting the phone. Ive tried restoring it from a backup but none of these have worked yet.

  • Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

    problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
    I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

    Hi have you solved the issue ?
    Cause I have the same problem.
    Tnx

  • Apply my own formula when user presses sum button in a report

    Hi all,
    I have this requirement that when user presses SUM button for a particular field in a report instead of Summing it up and displaying I can apply my own formula and display its value. 
    For Ex :  When we press sum button for field efficiency :
    EFFICIENCY
    10
    11
    05
    26 - It would sum it up and display 26 , where as i don't want it to display 26 i want to apply a separate formula and display that value

    Suggest to add another custom button to the ALV toolbar and write the desired logic you want.
    Also to avoid confusion, disable the standard summation button. (you can add the same icon for the custom button if you wish)
    Thanks,

  • Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

    Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

    Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
    Then, wake the Mac the way you normally wake it.
    Then, find the Console app - it is in your Utilities folder and looks like this
    You can find it by selecting Utilities from the Finder's Go menu.
    Open Console.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
    That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
    Make note of that exact time in hours, minutes, and seconds.
    Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
    All previously displayed log entries will reappear.
    Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
    One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
    Copy and paste those log entries in a reply.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • Cannot delete Lists from Reminders app after upgrading to iOS 7. The deal is that those lists don't show in iCloud account in the Web-Browser, so I cannot delete via Browser, when I press the button Edit in the List, there is no Delete button at thebottom

    On my iPhone 5, upgraded to iOS 7, the lists in Reminders are impossible to delete.  When I press Edit button in the right corner of the app, the button Delete list is supposed to be at the bottom, but it's empty there, the deal is I could delete some of the lists, but most of them I can't. I tried delete iCloud account from iPhone, but they are still there, and still no Delete button. In the Browser I don't see those lists, so cannot delete them from the Browser as well. Could you help me?

    Read on another thread here that you now swipe in the opposite direction. Try swiping right to left.

  • When i press power button i hear several click sounds before start up?

    When I press power button I hear several click sounds before start up begins. Shortly after Apple logo appears it clicks off.

    Which MacBook Pro do you have? If it has an optical drive then that is just the optical drive checking if there is a disk inserted.

  • I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too.  How do I get it to put the songs on my iPhone?

    I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too. How do I get it to put the songs on my iPhone?

    Have you selected the music to sync?

  • Something has happen my ipad air 2 it wont let me download or update any apps, when I press the button do update or download it looks like it is but it doesn't so if anyone knows what's going wind please help me

    Something has happen my ipad air 2 it wont let me download or update any apps, when I press the button do update or download it looks like it is but it doesn't so if anyone knows what's going wind please help me

    Do you have any restrictions for purchasing apps on the phone? Settings > General > Restrictions. If you have a Mac computer or another Apple device can you purchase things in the App Store using the same Apple ID on something else?

  • How can print a report from form 6i,  when I press a button?

    hi Friends,
    How can print a report from form 6i, when I press a button?
    When i press a button from Form 6i, the report should print through printer.
    I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
    I want when I press a button form Forms 6i , printer will print my report directly.
    Please send me the solution of this problem.
    Best regards,
    Shahzad

    Hi
    If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
    Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
    If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

  • How do I set the environment to change outputs when I press a button?

    Hi guys!
    This is a question for the Logic pros:
    How do I set up my environment so that when I press a Button on my Midi Controller the Outputs from the Master Channel switch from 1-2 to 3-4 (to hear my music through different loudspeakers)???
    Does somebody know how to do that?
    Thank you in advance!
    Greetings from Germany

    The easiest way is to route your mix to all the outputs you're using. Then set up fader objects in the env that transform toggled cc's from your keyboard switches. Cable those fader objects to the output channel objects. To toggle the Mute on an output channel you'll need to send it a fader message #9, value 0 or 1, on channel 1.
    That would work, as long as you have switches on your keyboard that can transmit toggled cc's.

  • Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    You could try a SMC reset:
    http://support.apple.com/kb/HT3964
    If no change, do what Allan advises.
    Caio.

  • HT5622 Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected

    hie there Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected to net

    I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
    Thanks very much for your feedback.

Maybe you are looking for

  • Question on Animated GIF Timing

    I have a weather-type animated GIF, and believe me, it is not my choice or idea, but anyway I need to get this working. Here it is: http://www.sendto.org/temp/weather-cvia.gif. In this animation, all the frames are set to 100 but the timing is not sm

  • Af:query component with cascading Lov's

    Hi All, I have Cascading LOV's model setup in Business Components and they work fine in a form or table but they are not working inside af:query component as there is no autoSubmit attribute on the query component itself can someone help me to resolv

  • Slow drawing paintComponent when scrolling

    I have the following problem. I have a inteface a la Dune 2 (main map and on the upper right side a navigation map). It won't be used as a game, but just to imagine the kind of interface I'm developing. Anyway, I have a mainimage which holds the 'rea

  • How do u find logical datanase exist for ur program requirement?

    How do u find logical datanase exist for ur program requirement?

  • Battery going down every minute.. 2011 MBP.

    I have a 15" Pro 2011 (early) i7, 8 GB Ram. My battery goes down 1% every minute.... So If I use my MBP for 100 minutes, the battery is dead.... I have closed everything off, apart from safari. Screen brightness is at 6 blocks.. Even though it tells