When I preview my slide show in full screen I can not get back to the small preview screen. I have t

have to restart computer

annamom6121 wrote:
yes tried the ESC Worked 1st time then didn't after that.
Have you tried using other keyboard to see if the present one is broken.  It is not uncommon to find that some keys stop working in some keyboards.  I have some keyboards in which certain keys don't work anymore.
Hope this helps.

Similar Messages

  • I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ?

    I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ? The communications with the module are OK, because it shows when the current are open or closed.

    Jorg,
    I noticed that you claimed to be using the module in 0-20mA mode, yet the reading you are seeing is 3.5mA. This is the minimum value (with overranging) when the module is set to 4-20mA mode. My guess is that your module is defaulting back to 4-20mA mode, but your IAK file still thinks the module is in 0-20mA mode. You can verify this by using the find devices button in FieldPoint Explorer and then trying to write to the channel.
    To fix this problem, you should use the snapshot feature to change the default power-up mode for that channel.
    Regards,
    Michael Shasteen
    Applications Engineering
    National Instruments
    www.ni.com/ask
    1-866-ASK-MY-NI

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • I was adding items with the intent of command z 'ing them back to their original when it crashed, autosaved, and my original numbers were lost to the temp numbers plugged in... how can i get back to the previous version? Because it had closed, command z

    I was adding items with the intent of command z 'ing them back to their original when it crashed, autosaved, and my original numbers were lost to the temp numbers plugged in... how can i get back to the previous version? Because it had closed, command z

    Sorry, this happened in CLOUD numbers....

  • I lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says  NO DEVICES, how can i get back to the find my ipod page??? pliz help :(

    i lost my ipod and i remotely locked my ipod on the computer using icloud, but when click on find my ipod it says  NO DEVICES, how can i get back to the find my ipod page??? pliz help

    The only way you will be able to track that iPod is if it is turned on and connected to a wifi network by the person that has it.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • When taking a picture with home button and sleep button can you get rid of the tool and task bar??

    When taking a picture with home and sleep button can you get rid of the tool and task bar?? (the search bars)

    No, but you can use any picture editing tool to crop out the bars.  (Many are free in the App Store.)  Me personally, I use PhotoPad, which I use to crop as well as rotate the screen shot.  Takes less than a minute to do both with PhotoPad.

  • HT5654 I keep getting an error message on my computer when trying to update my I phone 4. I can not get my I phone to turn on.

    I can not get my I phone 4 to turn on. I have plugged it in and followed the instructions. I keep getting an error message on my phone.

    Excellent!
    Please note the following:
    Note: iCloud Backup does not back up music, movies, and TV shows that you did not purchase from the iTunes Store, or any podcasts, audio books, or photos that you originally synced from your computer. iCloud Backup will restore your purchased music, movie, and app content from the iTunes and App Stores during the background restore process. Previous purchases may be unavailable if they are no longer in the iTunes Store, App Store, or iBookstore.
    The above comes from this article:
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    Best of luck with this.

  • When i updated my ipod to ios 6 but i did not get siri or the phone.what should i do?

    when i updated my ipod to ios 6 i did not get siri or the phone and i really wanted it.what should i do?

    I'm sorry to say that Siri will work only on 5th generation iPods.

  • Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen.  Need some help here.

    Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor.  Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen.  Need some help if anyone else has run into this problem.

    You should contact Microsoft for Mac Support  and/or post in their forums.

  • How to get music to play when i uses a slid show as my screen saver

    I created a slide show with music it works fine as a slide show. When I choose it to be my screensaver the music does not play. New to mac any help would be much appreciated.

    If you made the slideshow with iPhoto, you need to post in the iPhoto forum area.  

  • TS1369 I fractured the screen on my iPhone 4, 2+ years old and the latest when bought so I bought a new phone but I can not get my previous purchases to download to itunes that were there 2 weeks ago. Changed apple id once and now it shows up when downloa

    I bought a brand new iPhone 4 as soon as it came out which was 2010 I think.  No problems until two weeks ago.  I fractured the screen on it so I am slowly losiong some functions like charge, touch screen ability and need to activate my new iPhone but I am having trouble with iTunes showing my full song library. I have 554 plus songs but some that will not update or download,. Two weeks ago is when this all began.  I used to have a different apple ID but changed it after a few months for security reasons.  Now when I try to observe my itunes library it only shows the most recent songs I have purchased,35.  Not all, and there are still songs that it states it can not download because my computer is not authorized, I authorize it and it says it is already authorized.  Then it gives me the old apple ID from years ago and I change it back to my new one, but this only causes it to do it over and over.  I called apple and they said all kinds of mean things that my son or husband had been using my ID or account, of which is impossible because all purchases have to be password protected and I get warnings if anyone attempts to access.  Also, their ID's are not my old one.  Their libraries have none of my music. I do not home share but I thought that iTunes says you can use the music for households if you homeshare so I do not know why the person was so abusive but I am frustrated. So, any ideas?  I was instructed to install icloud and did and it seems to me to be the culprit so I bought the stupid iCloud sharing manage,$25 yearly so that it automatically downloads your full library but no luck, still only shows the purchases I recently made with my gift card.  This was suggested by the apple care expert.  Can not update my phone until backed up, can not change phones until updated and backed up.

    I know it sounds weird, and that is the reason I posted my question.  Because my case is not like all the ones I've found online and it's confusing.  I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
    My playlists "ARE"  in my iphone 4s.  They are still there even though they do not show up when I plug in to itunes in my computer. 
    When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes.  I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes:  Music, Movies, TV shows, books.  That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS"  but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone.  Under "90's music" there are also other standard playlists that itunes automatically adds.
    Does anyone else have this issue or know how to get around this.  I am starting to think that I am going to have to recreate these lists on my computer

  • After automatically updating when I turned on the computer, Firefox erased all my History from the end of September until the update yesterday; how can I get back all the searches in my Show All History?

    When I opened Firefox and it automatically updated yesterday, all my search history from then back to the end of September was wiped clean from the "Show All History." I very much need that search history, which is essential for my research. I didn't bookmark it because I knew it would always be there. But it's not. Please help.

    Firefox tarballs from Mozilla Org use prefs within Firefox for updates. The "toggle" for not automatically updating - '''app.update.enabled''' and where to look for updates - '''app.update.url'''. The first needs to be '''''false''''' and the second could be a '''''null''''' string, do an update can't be found.
    ''I use both prefs to keep Firefox from updating by itself. I install each new version of Firefox as it is released, and keep the older versions around for reference purposes. Those prefs are the same since Firefox 1.5 came out.''
    The versions of Firefox that are part of an operating system installation usually are that OS's own build of Firefox, and don't use the same update setup as Mozilla uses, in most cases. I am not familiar with Cent OS, but Ubuntu and Debian look for Firefox updates and from their own program repository servers outside of Firefox - as with the tarballs from Mozilla.

  • When importing an MXF file from a CF card, I can only get :30 of the original clip. What am I doing wrong?

    When importing MXF video file from a CF card to Final Cut 6, I can only import :30 of it. Why am I limited to :30 and how do I get the entire clip?

    That's the WRONG WAY!  You have to use Log and Transfer, like Michael says.  Here's A tutorial on how to deal with Tapeless in FCP
    <a href=http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 target=_blank>Tapeless Workflow for FCP 7 Tutorial</a>
    BUT NOTE!  If this is MXF from a CANON camera...their new 305 camera...you not only need a plugin to get it to work (they either include it with the camera, or you have to go to the website... the Canon Log and Transfer plugin), it also might only work with FCP 7.  Because the camera is brand spankin new.  Try the plugin first...well, if this is from that Canon camera.

  • When I tried to buy the ankimobile app for my iPad, I got a message that my account was not valid for the Austrailian store.  How did I get transferred to the Austrailian store, where I have never been before? And how can I get back to the U.S. store so I

    When I tried to buy ankimobile for my iPad, I got a message that my account was not accepted in the Australian store, and to transfer to the U.S. store.  I don't know how I got to the Australian store and I tried but can't figure out how to get back so I can buy the ankimobile.  I have never gotten this message before and never even knew there was more than one store.  Is the ankimobile an Australian app?  What should I do?
    Meadowlark2

    How to Change the Country for iTunes & App Store Accounts
    http://osxdaily.com/2013/05/24/change-country-itunes-app-store/
     Cheers, Tom

  • A search engine page has started appearing when I press New Tab. There are no new add-ons. How can I get back to the frequently-used sites thumbnails?

    I used to get a page of thumbnails when I pressed + for a new tab but now I get a search engine that seems to be "Connect SP 6 Toolbar". I can't find it to delete in the Add-Ons or Extensions.

    You can check these extensions and try to uninstall ro disable them.
    # Protect My Choices 1.1.2 ({dc501fe1-520b-41f2-9421-ecbb2e7f0255})
    # YourOnlineChoices Plugin
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    Your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
    The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
    you can check its content with a plain text editor if you didn't create this file yourself.
    The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js
    *https://support.mozilla.org/kb/Resetting+preferences

Maybe you are looking for