When I print a page the header and bottom doesn't print correct.

My pages doesn't print out correct.
== This happened ==
Every time Firefox opened
== A while now

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages]

Similar Messages

  • When I open my firefox the page is shifted to the right 1/3 of the way. I can't see the slider bar on the right side of the page, the top and bottom are fine it just the page in the middle that is shifted to the right.

    that pretty much says it all above. I have since tried to remove and reinstall firefox from my computer 4 times in the last 2 months and the same thing happenes each time.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

    I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
    == This happened ==
    Every time Firefox opened

    Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
    The first is labeled "Printer",
    The second is "Presets".
    The third is unlabeled but has "Copies & Pages" selected by default.
    Click on that third menu and select "Firefox" near the bottom of the list.

  • When I am merging a Pages document, the header and graphic is only printing on every other page?

    I have make a Merge file from Pages.  When I go to print this, the Header and Graphic is only printing on every other page.  Can anyone advise?

    That is very hard to follow.
    We have no idea what you are merging, nor what header or graphic you are referring to as we can not see the document.
    My guess is that you are talking about something like a letterhead which has a logo and address only on the first page and none on the following pages.
    Each merge is probably running over the 1st page and onto a following blank page. If you want the "Header and Graphic" to appear on subsequent pages as well then you will need to create master pages/objects for the following pages to suit.
    This is how you go about doing it for a standard letterhead and follower:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=letter head&mforum=iworktipsntrick
    Just add the graphics to the follower pages as well.
    Peter

  • I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    I have just updated to Pages 5.1 and now the templares which I have saved do not displat the header and footer which they were saved with in the previous version.  How can I have the header and footer included when I open a template?

    That is becuase Pages 5.1 has numerous unnounced surprises for the unwary user.  Among the surprises:
    - it strips out images from headers and footers without warning
    - it strips out bookmarks without wanring (yes, all those bookamrks you laboriously put into a document: poof! Gone.)
    - it strips out alternating left/right margins, without warning.
    There are many more suprises, as you'll see from glancing through these discussions. They fall into two main categories: things that are present in version 4.3 but that are missing in 5.1, things like
    -mail merge
    -meaningful Applescript/Services support
    -non-contiguous text selection
    -ability to set defaul zoom
    -ability to see comments while editing
    -ability to print comments
    -ability to read RTF files
    -ability to drag in hyperlinked ted from a browser
    These about about 90 other features are gone.
    Then there are the bugs.  Hyperlinks do not reliably export to a PDF file any longer. There have been multiple problems with printing report. Some fonts place stray characters in the headers.  Many reports of the program crashing, courrupting files, etc.
    Fortunately for you, the previous version of Pages is still on your system.  Export any documents you may have created or edited with Pages 5.1 (another great surprise: files created with version 5.1 cannot be read by any previous version of Pages: not just 4.3 but even 5.01!).  Then trash 5.1 and use 4.3 until (unless?) it is stable and has a reasonably robust feature set.

  • Is it possible to resize the header and footer on a webpage before you print the page you want the print?

    It seems to me the header and footer on every page I want to print is so darn small. If possible I'd like the header and footer size in Firefox to be close to the size of my other browser, Microsoft's IE8 browser.

    Glad I could help.
    But not all of us are gentiles.

  • How do you print from safari without the header and footer?

    I may be missing something but...
    When printing in Safari how do you remove the header and footer.  I am using PDF creator to save pages as PDF for things like online pay slips and want them to be 'clean'.
    Running Safari 5.1 on Windows Vista
    Thanks in advance for any help.
    Mark

    I may be missing something but...
    When printing in Safari how do you remove the header and footer.  I am using PDF creator to save pages as PDF for things like online pay slips and want them to be 'clean'.
    Running Safari 5.1 on Windows Vista
    Thanks in advance for any help.
    Mark

  • Get rid of the white space at the top and bottom of the report when Printing as PDF document

    Hello All,
    I have a wider tablix report which is 29 inches wide. I have given the paper size as custom and width as 29 and height as 11 in report properties.I have deployed it and saved it as PDF document. When I print preview the report I am using the paper size as
    tabloid (17 by 11) and selected the orientation as Landscape. I am getting the full report without any stripping but I am getting some extra space at the top and bottom when I print the report. Can anyone help me how to get rid of this space? . I checked the
    margins for the report and it was 0in. Please help.
    Thank You

    Hi There
    In Reporting Services (SSRS 2008), there are white spaces preserved in the report body by default. When the white space extends the body size beyond the width of the report, blank pages will be generated. To avoid the issue, you can set the “ConsumeContainerWhiteSpace”
    property of the report to “True”.
    Please try to adjust your margins (top + side) and hopefully this problem will get resolved
    Body Width <= Page Width - (Left Margin + Right Margin)
    Horizontal usable area:
    X = Page.Width - (Left Margin + Right Margin + Column Spacing)
    Vertical usable area:
    Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
    Body Width <= Page Width - (Left Margin + Right Margin)
    Horizontal usable area:
    X = Page.Width - (Left Margin + Right Margin + Column Spacing)
    Vertical usable area:
    Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
    If you have any questions please ask.
    Many Thanks
    Syed Qazafi Anjum
    Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

  • After udate to IOS 8 when I call up a pdf file for my lyrics it now had a header and footer that are blocking my words.  Can I get rid of the header and footer

    I have all my lyrics for my songs in iBooks on my Ipad.  Before updating to IOS8 when I called up a song only the lyrics came up.  Now after updating to IOS 8 there is a header and bottom(showing the page).  The header is cutting off my words and they are making my songs now appear on 2 pages instead of 1.  Is there anyway to get rid of the header and footer so only my lyrics show on the page?

    Tap the screen once and the header/footer disappears.  Tap again and it reappears.

  • What are the boxes that appear when I scroll over them at the top and bottom of a Pages document, and how do I get rid of them?

         While types a blank document on pages, there are "invisible" boxes at the top and bottom of each page, and they only appear when I scroll over them. Does anyone know what these boxes are, and how i can get rid of them from my paper?

    Those are the Header and Footer spaces. You remove them using the Document Inspector. Uncheck the "Headers" and "Footers" checkboxes shown checked here:
    Regards,
    Barry

  • After applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting)

    After applying full scroll bar to the page including header and footer, I have provided content to
    the page more than 100 lines and try to format the text from ribbon actions(format text area). On mouse over of font or fore color, the control jumps to the highlighted content area and not able to select the color. The page scrolls down and not able to click
    on any action.
    Consider this scenario also.
    A content editor web part is added toward the bottom of the page.
    Text is added to this (direct in the web part, not via a 'content link')
    You highlight some text and go to the Markup Style dropdown...
    Everything is fine until you hover over the "Paragraph" markup style, and suddenly the page scrolls to the web part you are editing, and you didn't have a chance
    to click and apply the "Paragraph" formatting
    I have tried testing this with text typed directly into the Content Editor, text pasted in from somewhere else, and text pasted in from somewhere else using "Paste as
    Plaintext" option in the ribbon.  In each scenario, I get the same results.
    Furthermore, I have also tested this in both IE8 and IE9 and get the same results.
    I can get it to occur most regularly with trying to apply the Paragraph "Markup Style" but
    I've also seen this happen with Font Size (any font size).  It's very frustrating since you aren't able to actually apply the formatting you need because the page jumps before you can click.  Has anyone experienced this before. Any feedback would
    help.

    Hi,
    According to your post, my understanding is that after applying full scroll bar to the page including header and footer, Text editor ribbon actions cause page to automatically scroll down (while applying formatting).
    I try to apply full scroll bar to the page including header and footer, the ribbon is missing after I scroll down to the web part. And I cannot apply the "Paragraph" markup style to the content.
    I recommend to use the SharePoint core styles to preserve the native functionality and GUI.
    By design in SharePoint, the ribbon is always at the top. When you select the content, you can apply the "Paragraph" markup style in the ribbon.
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Removing the header and footer in Pages

    I just began to use Pages after purchasing a new ibook. In AppleWorks, headers and footers were never inserted by default. In Pages, how can I remove the header and footer in Pages so I can have more space for the body section of the document?

    I had already set page margins to zero, and I disagree with you: Headers and footers still appear with a height of approximately 1/8 inch.
    SInce I posted my previous message, I have experimented a bit. I was able to (almost but not quite) totally eliminate the header and footer by clicking into the header and footer area and reducing the font size to the absolute minimum. After having done that, the body was basically in-line with 0" on the vertical page ruler.
    Also, in my opinion, whether or not most printers do a full page bleed is irrelevant. I should be able to work with the page body without its being offset from the page ruler if I don't want to employ a header or footer.
    Rusty

  • How to change the header and footer in the Section Breaks Next Page using OpenXML?

    I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
    Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
    button in the Word Application but I don't know how to change it using XML?
    My code that adds the new page in the section breaks is:
    class Program
    static void Main(string[] args)
    string path = @"C:\Riyaz\sample.docx";
    string strtxt = "Hello This is done by programmatically";
    OpenAndAddTextToWordDocument(path,strtxt);
    public static void OpenAndAddTextToWordDocument(string filepath, string txt)
    using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
    document.InsertSectionPageBreak();
    Paragraph p1 = document.InsertParagraph();
    p1.Append("This is new section");
    document.Save();
    Please help.

    Here is the sample for your reference:
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using DocumentFormat.OpenXml;
    using DocumentFormat.OpenXml.Packaging;
    using DocumentFormat.OpenXml.Wordprocessing;
    namespace WordAddNewFooterHeader
    class Program
    static void Main(string[] args)
    string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
    string strtxt = "OpenXML SDK";
    OpenAndAddTextToWordDocument(path, strtxt);
    public static void OpenAndAddTextToWordDocument(string filepath, string txt)
    // Open a WordprocessingDocument for editing using the filepath.
    WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
    MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
    Body body = part.Document.Body;
    //create a new footer Id=rIdf2
    FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
    GenerateFooterPartContent(footerPart2);
    //create a new header Id=rIdh2
    HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
    GenerateHeaderPartContent(headerPart2);
    //replace the attribute of SectionProperties to add new footer and header
    SectionProperties lxml = body.GetFirstChild<SectionProperties>();
    lxml.GetFirstChild<HeaderReference>().Remove();
    lxml.GetFirstChild<FooterReference>().Remove();
    HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
    FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
    lxml.Append(headerReference1);
    lxml.Append(footerReference1);
    //add the correlation of last Paragraph
    OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
    ParagraphProperties paragraphProperties1 = new ParagraphProperties();
    SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
    HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
    FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
    PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
    PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
    Columns columns1 = new Columns() { Space = "720" };
    DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
    sectionProperties1.Append(headerReference2);
    sectionProperties1.Append(footerReference2);
    sectionProperties1.Append(pageSize1);
    sectionProperties1.Append(pageMargin1);
    sectionProperties1.Append(columns1);
    sectionProperties1.Append(docGrid1);
    paragraphProperties1.Append(sectionProperties1);
    oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
    body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
    part.Document.Save();
    wordprocessingDocument.Close();
    //Generate new Paragraph
    public static Paragraph GenerateParagraph(string text, string rsidR)
    Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
    ParagraphProperties paragraphProperties1 = new ParagraphProperties();
    Tabs tabs1 = new Tabs();
    TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
    tabs1.Append(tabStop1);
    paragraphProperties1.Append(tabs1);
    Run run1 = new Run();
    Text text1 = new Text();
    text1.Text = text;
    run1.Append(text1);
    Run run2 = new Run();
    TabChar tabChar1 = new TabChar();
    run2.Append(tabChar1);
    paragraph1.Append(paragraphProperties1);
    paragraph1.Append(run1);
    paragraph1.Append(run2);
    return paragraph1;
    static void GenerateHeaderPartContent(HeaderPart hpart)
    Header header1 = new Header();
    Paragraph paragraph1 = new Paragraph();
    ParagraphProperties paragraphProperties1 = new ParagraphProperties();
    ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
    paragraphProperties1.Append(paragraphStyleId1);
    Run run1 = new Run();
    Text text1 = new Text();
    text1.Text = "";
    run1.Append(text1);
    paragraph1.Append(paragraphProperties1);
    paragraph1.Append(run1);
    header1.Append(paragraph1);
    hpart.Header = header1;
    static void GenerateFooterPartContent(FooterPart fpart)
    Footer footer1 = new Footer();
    Paragraph paragraph1 = new Paragraph();
    ParagraphProperties paragraphProperties1 = new ParagraphProperties();
    ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
    paragraphProperties1.Append(paragraphStyleId1);
    Run run1 = new Run();
    Text text1 = new Text();
    text1.Text = "";
    run1.Append(text1);
    paragraph1.Append(paragraphProperties1);
    paragraph1.Append(run1);
    footer1.Append(paragraph1);
    fpart.Footer = footer1;
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Need to remove the header and footer regions on one page

    Hi,
    I have a requirement to remove the header and footer regions on one page only. The regions I'm referring to contain the following:
    Header:
    Company logo, Home link, Logout link, Preferences link
    Footer:
    Copyright info, Privacy Statement, Home link, Logout link, Preferences link
    These are the standard Oracle header and footer regions/page items, so I am not specifying a particular page name, although it would be the create time cards page we want to modify.
    Also, we only want to remove these regions/items from ONE page, not an entire responsibility.
    Any help is greatly appreciated.
    Thanks!
    Suzanne

    Hi,
    In order to hide,
    Home link, Logout link, Preferences link
    Use this code in the processrequest of the controller on the page on which you want tohide these
    OAPageLayoutBean page = pageContext.getPageLayoutBean();
    page.prepareForRendering(pageContext);
    page.setGlobalButtons((oracle.cabo.ui.UINode)null);
    And for hiding the Copyright info, Privacy Statement:
    Click on Personalise page link
    then Click on Choose Context
    Choose "OAFooter" as Scope
    and click "Apply"
    and then Personalise the Copyright and Privay Statememnt icon and set rendered as False.
    Thanks,
    Gaurav
    Edited by: Gauravv on Aug 25, 2009 8:36 PM

  • Pages 5.2 How do I remove the fields in the header and footer?

    I need to add objects and footers that are longer than the field dividers allow in the header and footer of my document. How do I remove the field divisions?

    You can't remove the dividers in Pages 5.
    They don't exist in Pages '09.
    On the Mac you can simply keep typing and the text crosses the dividers.
    A quick test on my iPod touch suggests the same on iOS.
    Peter

Maybe you are looking for