When I print I get lines about 1 inch apart across the entire page?

When I print a photo lines come out about 1 inch across the entire page?

It is on the left side of video playback of any kind now.

Similar Messages

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

I am getting horizontal white lines one inch apart when I print an Ai file

I am getting horizontal white lines one inch apart when I print an Ai file

*White lines 1" apart showing up on my printouts*~
It is a NEW Epson 1430. However, I have horizontal thin white lines across my prints. (13x19in Paper) I've cleaned the heads, ran a test print, realigned and then reprinted - I keep getting the same white lines in exactly the same places.
I’m printing an AI file in Illustrator and the lines don't show up on my screen. Is there something wrong with the data? I am going to do more experiments to try and identify exactly what conditions cause this problem.
Thank you for your help!

HPLJ 4250 printing black line inch size across top of page.

HPLJ 4250 printing black line inch size across top of page. The Maintenance Kit and the toner have been changed, the option in the menu to clean fuser has also been done. The black line is intermittent so it hard to work out what to do next.

Thanks for the tip Mikey - however the same thing happens with the thin black lines when I print on 'normal' A3 paper too. On normal A4 paper it's fine, no lines, but when I print to A3 I get the lines - on both kinds of paper.
I've attached a couple of (awful-looking) scans to help illustrate my point.

HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

When I print I get multiple pages with a little print on all pages of what I want printed

when I print I get multiple pages with what I am printing with a few lines on each page till what I have printed is complete.
This question was solved.
View Solution.

mamorse,
Thanks for the additional info. Lets try downloading and running the Print and Scan doctor located here. It can fix a lot on its own but if not it will give us a better idea of what is going on. The weak signal is not likely the culprit (as it has been working for a good while) but we can try altering that if other steps fail.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all.

When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.

Hey Grupo Castillo,
Thanks for the question. You can actually configure this behavior from Mail preferences:
1. Choose Preferences from the Mail menu.
2. Click Composing.
3. Deselect the checkbox for "When sending to a group, show all member addresses".
When you send an email to the group, only the groups name will be seen.
Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
http://support.apple.com/kb/TA21082
Thanks,
Matt M.

I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

I have coloured vertical lines about a quarter of the way from the left of the picture when using my apple tv 2. Anyone got any idea what is causing it. Have done a reset but still same. ATV2 is only a month old.

Just to make sure, try a different set of cables. If the problem persists, have the unit replaced by Apple.

When I want to zoom in or zoom out with the mouse wheel and CONTROL button the letters get larger but remain within the same size paragraph and any pictures remain the same. I want the entire page to zoom.

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/866940]]</blockquote>
I want the entire page to zoom in and out when I use CONTROL + mouse wheel. Now the letters get larger but remain in the same size paragraph and also the pictures stay the same.

It is indeed scandalous that Apple sells useless scanned music scores. There is a warning when you chose to download music tabs or notes but it doesn't say that the score lines are very small and cannot be zoomed. I spent $30 on two books but cannot really use them on my MBA as you cannot zoom except for the double click which only works page per page and is only a small improvement.
The only way I can use the score more or less is on my ipad in landscape mode by increasing the font size to the max. The music score then becomes wider and you can read 2-3 lines per page without glasses.
If you could transfer the file to the pdf "side" of the library in ibooks the zoom would work..
What does work is using the accessibility zoom mode option+command+= to zoom and then option+command+\ to smooth the picture but then your whole display desktop etc. are zoomed in.

My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

When i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

Adobe cloud setup downloaded off the internet just fine but when i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

Multiredwolf123 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error?

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even previe

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I already used facetime before but for some reason I have to sign back in and it wont let me. I clicked "Get Started" then "Sign in" but then after about 3 seconds on the next page it just slides back to the "sign in page"

I already used facetime before but for some reason I have to sign back in and it wont let me. I clicked "Get Started" then "Sign in" but then after about 3 seconds on the next page it just slides back to the "sign in page"

Try a Reset of your Device...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also see here...
Troubleshooting FaceTime
http://support.apple.com/kb/TS3367

Spry Menu - getting it to go fully across the page

Hi Everyone,
I'm making pretty good progress with DW CS4 to create my own business website, using a MacBook Pro. I've created a Spry Horizontal Menu Bar on the homepage, and have managed to get it how I want it to look (colours, position etc.) except that I would like the menu to go across the whole width of page. At the moment it leaves a small gap at the right of the menu which looks unprofessional. I had to change the font size to 95% so that the menu doesn't extend onto another line, but I just can't get it to fit exactly the 46em page width. (I am not using any submenus).
Here is the code below. Would be very grateful for any help.
Justin
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
     margin: auto;
     padding: 0;
     list-style-type: none;
     font-size: 95%;
     cursor: default;
     width: auto;
     min-height: 1em;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
     z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
     margin: 0;
     padding: 0;
     list-style-type: none;
     font-size: 100%;
     position: relative;
     text-align: left;
     cursor: pointer;
     width: auto;
     float: left;
     white-space: nowrap
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
     margin: 0;
     padding: 0;
     list-style-type: none;
     font-size: 100%;
     z-index: 1020;
     cursor: default;
     width: auto;
     position: absolute;
     left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
     left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
     float: none;
     background-color: transparent;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
     position: absolute;
     margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
     left: auto;
     top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
     border: none;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
     display: block;
     cursor: pointer;
     background-color: #83B02B;
     padding: 0.5em 1.54em;
     color: #FFFFFF;
     text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
     background-color: #E50000;
     color: #FFF;
     font-size: 100%;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
     background-color: #E50000;
     color: #FFF;
#here { background-color: #7F7F7F; }
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
     background-image: url(SpryMenuBarDown.gif);
     background-repeat: no-repeat;
     background-position: 95% 50%;
     font-family: Verdana, Arial, sans-serif;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
     background-image: url(SpryMenuBarRight.gif);
     background-repeat: no-repeat;
     background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
     background-image: url(SpryMenuBarDownHover.gif);
     background-repeat: no-repeat;
     background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
     background-image: url(SpryMenuBarRightHover.gif);
     background-repeat: no-repeat;
     background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
     position: absolute;
     z-index: 1010;
     filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
     ul.MenuBarHorizontal li.MenuBarItemIE
          display: inline;
          f\loat: left;
          background: #FFF;

Justin,
I had the exact same question a few days ago. I did what Ben suggested at first. I wrapped the entire menu (or ul) in a div and applied an id with a bgcolor the same as the menu. I was totally dumbfounded when it wouldn't span the entire page. I div should be a block element and therefore span edge of the page. I then set the width of the div trying to get it to go across the full 1000 pixel space I wanted covered. Still nothing!
Then I had an insight. The styles on the ul that build the menu position is absolutely, with basically takes it out of the page flow. Have you ever seen a div with nothing it in...no you haven't because they always collapse, just like an empty td. Sooo, I went back and set the HEIGHT of the div and removed the width and guess what? It worked perfectly. I did have to set the height in ems and played around with it as I decreased the font size of the menu. Currently my menu is set to 80% in the .MenuBarHorizontal and my background div is set to 1.8 ems.
To sum up:
1.     Wrap the menu in a div with some id (or class) applied to it.
<div id="navbg">
    <ul id="MenuBar1" class="MenuBarHorizontal">
    </ul>
</div>
2.     Build an id (or class) that sets the bgcolor and height
#navbg {
            background-color: #23A6DC;
            height: 1.8em; (because my menu is at 80%, otherwise 2 em seemed to work fine)
DONE!

When I print I get lines about 1 inch apart across the entire page?

Similar Messages

Maybe you are looking for