When I print I get multiple pages with a little print on all pages of what I want printed
when I print I get multiple pages with what I am printing with a few lines on each page till what I have printed is complete.
This question was solved.
View Solution.
mamorse,
Thanks for the additional info. Lets try downloading and running the Print and Scan doctor located here. It can fix a lot on its own but if not it will give us a better idea of what is going on. The weak signal is not likely the culprit (as it has been working for a good while) but we can try altering that if other steps fail.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you
hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer -
Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.
Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
If this is your "modem".......
http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
Does this device appear to be your "modem"? -
when i go to sync my apps with my computer it tells me ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?
Regarding your broken, previously authorized computer, here's how that works:
You would authorize your new computer -- maybe you've done that already. Then you will have two computers authorized. Apple allows you to have up to five computers authorized at any time. If you get to five, you can then go to your account details in iTunes and remove all authorizations.
Bear in mind this is not saying you can synch to more tham one library. Razmee209 and gdgmacguy's comments above are correct. But if Apple only allowed you to authorize one computer at a time, then having a broken computer would mean you could no longer use your Apple ID with iTunes. -
How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.
For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud." -
When I go to get add-ons (7.0.1), nothing shows up, except the "what are add-ons" info bubble. How do I make this work?. The rest of the functions in that section seem to work. And I can search MY add-ons, but not Available Add-ons.
Click on Extensions on the left-side.
-
How to get multiple copies with different decription on header line
I want to get multiple copies of print out automatically with different description on header line when i click on save or print button.
is this smartforms....?
if yes then this can be achieved using the copy windows concept of smartforms.....
Regards,
Lalit Mohan Gupta -
Hello,
I want to create a job definition of type perl for ftp using the jftp binary supplied with each platform agent because it delivers error codes in case of problems.
The command "get" works fine with one file. But I like to get multiple files by ftp and there is no "mget" command. When I am using the "list" command I get a list like using "ls -l" on unix. The format can change from system to system.
Does anyone uses jftp for multiple files?
Is there a way of using some command like "mget" or is there a possiblity to get a list only of the filenames without any attributes, so I can write a loop to get file by file.
Thx for help in advance.
Kind regards
Frank Morleo
Edited by: Frank Morleo on Jan 26, 2011 1:58 PMHello,
With SAP CPS 8.0 (M33.x) mget is available for jftp. Since it is command line utility you can also extract the jftp executable from this package and use it where you want.
Regards Gerben -
How do I create multiple TEBs with one submit button on one page in Captivate 7
I've read other posts on this topic (which refer primarily to earlier versions of Captivate) and am still at a loss as to how to put multiple text entry boxes on a page with one submit button. Here's my scenario:
I am creating test questions.
Each test question has multiple text entry boxes (for numbers only).
Student should be able to enter numbers into the textboxes in any order.
Then there is one Submit button that should initiate validating all the text entries, and move to a scoring page (so I can test it). (What would be best is if this button not only did the above, but also submitted scores to the LMS. But that is not my question at this time.)
I'd like this question to be set up as a template so that I can duplicate it, be able to add or delete text boxes and change the values required in the text boxes.
Here is an image of a sample question page with multiple TEBs. The yellow boxes tell the student where they need to enter text:
Any help or direction to help is appreciated!!I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible. -
Mail deletes / removes drafts when I try to save multiple messages with same subject line.
Hi,
Running 10.7.5, Mail version 5.3, I find that I cannot save multiple messages with the same subject line when I want to store them for sending to different people later. It automatically deletes the older message and only saves the new one.
Any idea/help? Can't find it online or using Macs's Help program. They are NOT being stored on my mail server, just checked.
Thanks!I am experiencing exactly the same problem. Mail will not keep multiple email drafts with the same subject line, although they are addressed to different people. At one point, I had drafted and saved a dozen or so such messages intending to send them later only to discover that Mail had deleted all of them but one. Have you received any help or guidance on this? I'm baffled. This did not happen with previous Mail versions.
-
If my computer displays a white screen with a folder with a question mark in it...what does this mean?
Hi Pattib123,
The flashing question mark says it can't find a valid system to boot from. Check out this article.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thank you for visiting Apple Support Communities.
Nubz -
Photocopying only part of page with fade out of center of page
My printer prints from the computer but does not print out well when photocopying. I get the sides of the page for the most part, but the center of the page fades to blank. I also can't print out a full alignment page (I changed the ink cartridges). Only the blue/green prints, no black markings for alignment.
It seems to be more of a problem with the black print/images. I was able to print a page from computer, but the ink looks more blue than black. Overall, even the colored printed part was somewhat faded. The edges of the page were outlined on the printed page in a combination of blue/pinkish gray. Another page, the black print on the page photocopied/printed as pink. It seems more of a problem with copying the upper middle part of the image, but it might be inconsistent.Hello @ajewel , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having issues with your print output. I'd like to help!
I'd recommend removing the ink cartridges, and perform a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fixing Print Quality Problems for the HP Photosmart Premium TouchSmart Web C309n All-in-One Printer ....
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored. -
HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.
HI! My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing. Not sure what happened to the printer. Came home one day and the printing wasn't the same. Possibly the kids could have fiddled with it but no one is owning up to it. Any solution to get the printer printing normal again?
Thanks
-LHi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Maybe you are looking for
-
Error while loading data to table
I was trying to load data into 2 tables using a single control file. When I run the program, it ends up in error. The error shown is The executable file /appl/apps/apps_st/appl/ap/12.0.0/bin/TEST_SHELL for this concurrent program cannot be executed.
-
I deployed one pl/sql web services using jdeveloper10g to oc4j. within this webservices, there are two operations which reture two set of xml data. For each operation call, the biztalk server need to validate against xsd files that we provide to them
-
How do i get the latest version of safari on my macbook pro? where is this in the apple store??
How do I get the latest version of safari on my macbook pro?
-
I had Infinity installed last tuesday so I'm 7 days into the service and I'm really not happy with the download speed I'm getting, before I ordered when I put my postcode in it told me I would get 33.9 Mbps, I havent hit over 24 Mbps yet, going wired
-
Not getting an option of exporting in mpeg 4 format? AVI file the size of the file is extremely huge
Hi, I am not getting an option of exporting in mpeg 4 format? Infact when I am rendering in AVI file the size of the file is extremely huge. Please can somebody help me in reducing the file size & exporting in MPEG4 format.