When i print i have pink lines across the full paper with the pictures color

printer has pink lines

Hi,
Please provide more info about the issue like what is the model no. of printer, are they vetical or horizontal lines?
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

I recently upgraded to 0S 10.6.8 on mab pro and now have pink lines around the desktop borders. A horrible red colour appears in the background of the screen saver, and in parts of Safari and other applications including MS Office. please help

I recently upgraded my Macbook Pro to SL OS 10.6.8 and now have pink lines around the desktop borders and some menus. There is also a horrible red colour that appears in the background of photobooth and parts of Safari. The screen saver looks like an alien life form with red in the background. There are odd translucent colours in the background of other applications including MS Office. It looks like a horrible psychedilic trip from the 60's. I ran the upgrade again but nothing changed. Can you help?

Backup your files off the computer (not TimeMachine) and disconnect.
Hold c boot off the 10.6 disk, under the Utilities menu > Disk Utiltiy > Repair Disk, and Repair Permissions
(quit and stop if Disk Repair (only) issues a failure and notify us)
Quit and install 10.6 again, reboot and Software Update again, this time download it and then run it. Check Software Update until clear.
c boot off the 10.6 disk and use Disk Utility >Repair Disk again (fixes a bug)
Reboot and check any installed programs, some may not function who have installed kext files into OS X, those need to be reinstalled.
You didn't mention if you upgraded from 10.5 or 10.6.7, the above steps are for fixing a 10.6 to 10.6.8
If you upgraded from 10.5, you should erase the drive in Disk Utility first, then install 10.6 fresh, but then all your programs will have to be reinstalled or updated from original sources.
Also the 10.6.3 upgrade disk has no free iLife, but you can install 10.5 fresh then upgrade to 10.6.3, then to 10.6.8 and then all new programs and that will give free iLife that came on the factory 10.5 disks.
You also can use Pacifist to extract iLife from 10.5 disks.

I have a line across the screen of my new ipad air

I got an Ipad air for Christmas and I have noticed a thin blue line across the bottom of the screen about an inch from the bottom. Has anybody else got this.

I had exactly the same problem with my brand new iPad Air a month or so ago. I searched through these posts to see if anyone had the same problem, and found that a few people did. After seeing that it appeared to be a legitimate defect, I took it back to the Apple Store. The guy there just smiled and said "watch this"....he pulled the screen protector back, and poof, the line was gone from the iPad! Turns out that he had seen the same problem more than once at his store. Seems as though certain screen protectors can get those thin lines burned into them. Neither of us knows why, but that's what the problem was for mine. I sent an email to the screen protector manufacturer (mine was a Zagg) and the only response I got was that it must have been caused by direct sunlight "or something". They sent me a new protector, and so far all is still fine....we'll see if it happens again!

Why do I have green lines across the screen

This morning hubby turned on iPad and it has green lines through the screen. It is also circling the apps. Could this be a pixel problem.

There is no need to bang or drop the iPad!! Read this solution. Read the whole thing.
If your iPad is still under warranty, I have heard that Apple will simply exchange it for you. That is not necessarily an ideal option, as many people do not want to have to bother with transfering all of their files to a brand new device.
My problem, however, was that my iPad was no longer under warranty when this occurred. I was so sad, because the warranty is supposed to be for a year. My mother bought it for me as a gift last Christmas, so it had not even been out of the box for a whole year when this happened. Nevertheless, since my mother bought it in October, the warranty had *just* expired, since they go technically by the purchase date.
Apple offered to fix it for me for $300!!!! A ridiculous price for a loose wire inside. I simply am not in a position to spend that kind of money, and if I was, why not get a new device at that price (NON-Apple!). I was very upset, but I didn't give up on it. I scoured the Internet for an affordable solution, I found one, and it worked!!
The problem is caused by a loose cable on the inside, simple as that (can you imagine they ask $300 for the fix!! After all I have invested in the App store, and buying the Apple keyboard to boot!!!).
The fix I found is simple, I did it, and it worked for me. It is the same repair a professional would do in this situation.
The following video demonstrates how to open your iPad. Warning! This is a do-at-your-own-risk solution! But I found it quite easy. Watch the video (which actually demonstrates the entire process of replacing the screen),
http://www.youtube.com/watch?v=MG5HhdeP_VY
Obviously, for our issue, you will not remove your screen. Simply disconnect the two cables as shown in the video, and reconnect them!! Simple as that! Then just reassemble it according to the video.
I purchased the prying tool and screw driver and latches from sw-box.com -- for under $20. I think it comes from Hong Kong, but it only took 8 days to get to me in TX, USA.
I hope this helps someone else.

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHero

If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )

When I print a picture and send it to my HP e-mail address I get vertical lines in the picture?

I would like to know how to get rid of the vertical lines in the pictures when I send a picture to my HP e-mail address that came with my new printer also I seen in the HP E printer settings that there is no 4/6 option to select
the 5510 Smart printer that I have I was disappointed to find out that the fandango app is not compatible with this printer
and I was wondering when it would be available for my printer.
how to fix that problem with the E print feature on my printer.
thank you for any assistance that you could give me
This question was solved.
View Solution.

Hi Shiba,
I understand that your printer is not printing picures as expected. I know you stated that you had tried troubleshooting steps above. Where you able to take a look at this document? Are you printing from a mobile device or computer?
Hope this helps.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

I have a horizontal line across the bottom of my screen how do I remove it?

Re: Macbook Air mid 2011, I have a horizontal line across the bottom of my screen, it appeared when I was updating my iPhone, How can I remove this line from my display?

It may be a GPU or display issue. In both cases, make a backup of your Mac and take it to an Apple Store or reseller to get it repaired.
To check whether it is a GPU or display issue, try taking a screenshot by pressing Command, Shift and 3 keys. The screenshot will appear in the Desktop, so open it and check if the line appears in the screenshot too. If so, it is a GPU issue; if not, it is a display issue.

I have a horizontal line across the middle of the ipod screen and the ipod and itunes won't sync. What is the line and is it connected to the no sync.

I have a horizontal line across the middle of the ipod screen and itunes and the ipod won't sync. What is the horizontal line and is it connected to the no sync.

Hey Dean Marvin,
Thanks for the question. These two symptoms are probablyh related. To troubleshoot, let's try resetting your iPod:
How to reset iPod
http://support.apple.com/kb/HT1320
Thanks,
Matt M.

Using your Ipad air does anyone see a line across the screen when you make it larger?

Does anyone get a line across the ipad screen when you make it larger? Is it just me?

Answer, no.
If you feel there is a problem, take it in for diagnosis.
Barry

Has anyone else has seen this problem with their iPod touch 5th Generation with iOS 7.0.4. My screen started making flashing white lines across the screen, then went dim, then pixeled with purples

The ipod will show flashing white lines across the screen, going down, it then does somthing where the screen will dim down but its not like when the backlight goes on and its about to lock. It dims the background of your ipod and the icons and letters kind of all look defined. Then the ipod gets all pixelized and it has big boxes on pixels and its all differnt colors like purples and greens, red, etc. then it turns right off and restarts itself less than 5 seconds later. These things happen really fast but when it does it's really weird. It first happened 3 times in a row, Its still continuing to happen but i can manually turn off my ipod by holding the lock button down and not even 30 seconds later it's like its possessed and it turns on by itself. I talked to somone on appel and they told me to back it up and restore it. I restored it and as soon as the process ended and tuirned on like a brand new ipod and like clockwork the glitch happened instantly. It did it a couple of times throughout the night and i kept having to watch it so i can keep turning it off manually because it continues to turn on by itself. I talked to 3 different people on Apple Support and they couldnt even find an answer for me. It's so weird.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also,
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Horizontal line across the monitor. It happened yesterday.

I have a HP ENVY 23-c1 10xt AiO (Lavaca3-SB)PCUS and there is a horizontal line across the monitor. It happened yesterday.

Hello again javajohn23,
I would like you to try the following steps:
Step 1. Turn off the computer, and then remove the power cord
Step 2. With the power cord disconnected, press and hold the power button for five seconds
Step 3. Reconnect the power cord, and then turn on the computer
If the above steps do not resolve it try the next set up steps:
Step 1. Restart your computer
Step 2. Repeatedly press the F10 key about once every second for five seconds after turning the computer on
Step 3. Wait five seconds
Step 4. Press the F5 key. This restores the default settings of the BIOS
Step 5. Press the Enter key. This accepts the changes
Step 6. Press the F10 key. This opens the Save and Exit window
Step 7. Press the Enter key. This saves the changes, exits the BIOS, and then the computer restarts
Step 8. Restart the computer.
Another thing I can think to try is review the HP Support document: Changing Display Settings, Background Image, Icons, and Screen Saver (Windows 7) to see if you can identify anything out of place.
We can also try to reload the Intel Graphics Driver for your computer as it will wipe out the settings when the new driver is reinstalled.
Please re-post with the results of these steps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizont

My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizontal line at the end.
Every time the lines are printing in the exact same place.
it happens mostly when prining involves blue colors.
the line are approx. 1 cm wide.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Glowfilter sometimes adds a line across the middle of the bitmap

I am using a glowfilter to draw the outline of a shape onto a bitmap. I set both inner and knockout to true.
Most of the time when I apply the filter, all goes well. But sometimes, some of the shapes end up with a horizontal line across the middle.
Does anyone have any idea what might cause this, and what workaround could be used to avoid it?

Hey Dean Marvin,
Thanks for the question. These two symptoms are probablyh related. To troubleshoot, let's try resetting your iPod:
How to reset iPod
http://support.apple.com/kb/HT1320
Thanks,
Matt M.

When i print i have pink lines across the full paper with the pictures color

Similar Messages

Maybe you are looking for