When I print in Photoshop CS6 the image prints narrower than stated image dimension.

When I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.

I just finished watching a segment of Luminous Landscape's Camera to Print and Screen 2 video series on printing to canvas. Problem Solved; I feel foolish that I didn't mention that I was printing-on-canvas as the solution to my dilemma would have been obvious. I measured a canvas print that I did last week and it has shrunk even more than when I first measured it. I have since printed large images on Epson enhanced matte and the dimensions were spot on. Thank you for your responses and great job on the video.
Palm Coast Charlie...

Similar Messages

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

When i first inst photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch photoshop it say " photoshop detected graphic hardware is not officially supported if you experience problem ple

when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks

Your video card is underpowered for the task.
Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor":

When i load up Photoshop CS6 it loads up the Administrators Account for some reason and it is quiet irritating if someone can help.

When i load up Photoshop CS6 it loads up the Administrators Account for some reason and it is quiet irritating if someone can help please respond as i would like to continue using Photoshop.

If you are using someone else's computer, then you need to get the Admin to sign in so you can run PS.
If it's your own computer, then you need to know the Admin's password so you can work. Better yet, YOU need to be the Admin.

Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Hi, I've got me a 4k pc screen and when I open up photoshop CC the tools and panels very small. Can I change the size of these?

Hi, I've got me a 4k pc screen and when I open up photoshop CC the tools and panels very small. Can I change the size of these?

If you have CC you can go to preferences>Experimental features and select scale UI 200%. Otherwise you're out of luck.

When I drag photos into iMovie, the image quality is degraded. Can I somehow prevent the degradation?

When I drag photos into iMovie, the image quality is degraded. Can I somehow prevent the degradation?

Hi
A very common origin to jumpy picture is
• Recorded material in one frame rate e.g. 29.97fps (NTSC) and iDVD set to do a 25fps (PAL) project - OR the other way around.
It delivers a DVD but a very bad one.
I do convert all my material to same fps as the DVD I want to do (e.g. PAL) - before any editing etc.
I use JES_Deinterlacer or Compressor to do this and the result is so much better.
JES_Deinterlacer is free on Internet and makes a Great job - Professional alternatives comes at an astronomical cost and the quality is not hardly no better.
Yours Bengt W

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears: "The licensing of the product does not work" Fault 6 How should I proceed? Have the program installed on only one computer.

Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.

Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene

When i write in photoshop cs5 the error

when i write in photoshop cs5 the error is (img)
Why this error please help me

This error is generally caused by a incompatible/incomplete/corrupt font. When you select the type tool, Photoshop reads all of your available fonts to generate a WYSIWYG list. To test if a bad font is the cause of this error, go to Preferences > Type and disable the Font Preview. If the Type tool now works without error, then we know a font is the root issue.
If on Windows, uninstall (drag font files out of the Fonts folder) and reinstall (drag font files into the Fonts folder) your most recent fonts. The files will be verified on reinstall and most likely one or more will give an error. If on Mac, validate your fonts with Fontbook.

I can use adobe photoshop cs6,the adobe photoshop show me tril version for 30 days how will be use life time (full version)\

i can use adobe photoshop cs6,the adobe photoshop show me tril version for 30 days how will be use life time (full version)\

You can buy it here: https://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_ creativesuite6.html?start=10
$700 Standard/$1000 Extended Full price
$200 Standard/$400 Extended Upgrade price from CS5.
Gene

When I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

when I upload photos, some of the images do not show, but appear as a dotted square. has anyone had this problem?

Hi Terence, When I am uploading photos from a memory card,not all of the photos show up on I photo as a photo image, but show up as a dotted square line. For example, I just added 12 photo from two days. The first day had 5 photos, but only 4 show up as images, then there is 1 as dotted a square. The next day, there 7 images, with only 4 showing up as photos, and three as the dotted squares.
I am using I photo 11, 9.1.1.
Thank you

Saved Adobe Illustrator as PDF. When opened, PDF does not contain the images?

I am using a brochure type template in Illustrator and I have placed a few images in the brochure.
I have completed my brochure and want to save the AI file as a PDF.
I have saved the PDF file but when I open it, all of the images are gone.
What can I do to fix this?

Sorry for all of the vagueness. Here are some details.
I placed the image by doing: File->Place and then I just dropped the image in. I have tried to embed the image but that didn't seem to help. The images are on my local computer.
I didn't do anything to the images other than placing a rectangle box/border around the image. I sent to border to the back and brought my images forward.
I saved the file to a PDF by doing: File->Save a Copy... and then saved it as a PDF.
I open the PDF file with Adobe Reader XI

HT4972 When I take photos of myself, the image come out backwards. I have an iPad2 and an iPad 3, and both of them do the same with my self portraits. Any ideas on how to remedy this?

When I take photos of myself, the image come out backwards. I have an iPad2 and an iPad 3, and both of them do the same with my self portraits. Any ideas on how to fix this. I use wifi.

Gmabert-
The front camera displays a reversed image on the screen, as if you were looking into a mirror. When you take a picture, it comes out normal, which is backwards to what you would have observed on the screen.
Fred

I've saved a 2 gigabite Photoshop file (an illustration) to my desktop but when I dble-click on it , while Photoshop opens, the image does not. It is still there but how can I access it?

AFter saving a very large file in photoshop Icant seem to call it up. DbLe clicking on the icon opens Photoshop but there is no evidence of the image. I have also triedaccessing it through the pull down menu in Photoshop and again, I can select it but it never appears. It's as though it is hidden somehow.

Are you seeing anything in the layers panel when you open it?
Can you open it in any other image editor or viewer? 2 GB is the upper limit for a psd. Maybe you should convert to tiff file format.
Photoshop > File > Scripts > Image Processor will do this for you.
Gene

When I print in Photoshop CS6 the image prints narrower than stated image dimension.

Similar Messages

Maybe you are looking for