When I print on Adobe, it prints in another language, how can I change that to print in English?

How can I print everything to English?

If the pdf is in a given language, then Reader cannot change the language. If the pdf is in one language and appears changed when you print it, then there could be an issue with your Printer driver, your OS, or your pdf. You can try to print as an image as a temporary work around.

Similar Messages

  • I have problems with the language when i install i put another language how can i repair that

    I need help because i was instaling first time my apple tv and whm i was going to select my language y press another one that i dont undestand , please can some one help me with this ?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • How do i get permission to use my camera on google plus when i by accident pressed the do not allow button- how can i change that setting?

    I want to have a conversation on google plus, but by accident i pressed the do not allow button. How am i able to change the setting?

    rwgleaves wrote:
    Is there any way I can change this for the entire drive?  Doing this one file at a time is crazy!
    Pick the entire drive>Get Info>Make sure you have read&write privledges and, of course, have added yourself. Either that, or pick all the files, and, once again, "Get info." You should be able to do this for a large group, not just file by file.

  • I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

    I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

    You may want to keep Reader. You may want to select Acrobat as your default, but be able to click on a PDF (or PDF link) to open in Reader when needed. There are likely some PDFs that will not open correctly in AA 7 because of new features folks add. Just because it opens in Reader XI does not mean it is in the new format, but just that is the default opening you have. To tell the type of file, you have to open the PDF and check the properties (ctrl-D) and check Description>PDF version.

  • My 5600 keeps defaulting to the fax first instead of the printer only how can i change that ?

    my 5600    keeps defaulting to the fax first instead of the printer only how can i change that ? 

    What operating system?
    In general you would go to the Printers (or Devices and Printers or Printers and Faxes) folder, right click on the 5600 and select Set as Default.  Depending on your operating system you may need to do this as an administrative user.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My Canon Pixma MG 7100 makes 2-sided printing the default. How can I change that to 1-sided for defa

    My Canon Pixma MG 7100 makes 2-sided printing the default. How can I change that to 1-sided for defa

    Hi janekieschninck,
    If the printer is currently set to perform duplex (2-sided) printing, you can turn off the setting by deselecting the option in the printer driver. Please follow the instructions at the link below associated with your operating system to find where the duplex feature is located for your operating system:
    Duplex printing - Mac
    Duplex printing - Windows
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?

    When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?
    When I purchase ITunes music, and it is a song from a Greatest Hits album, the Year of the song shows the year the CD was released and not the year the song was released (i.e. a song may be from 1986, but the Greatest Hits album was released in 1999, so my songs in ITunes show 1999).    So, I go into each of those songs and change it to the year that I want to be displayed. As long as I don't exit out of ITunes, it will show the year that I changed it to (i.e. the 1986 year in this case). But if I exit out of ITunes and then return to ITunes, the year reverts back to 1999. The same happens if I change the genre of a song from, say 'Pop' to 'Alternative', it will revert back the next time I log in.
    Oddly enough, as soon as I right-click on that song to change it back, the year/genre that I had entered returns.
    How can I make it so my changes are permanently displayed as I want them?  This is pretty annoying when I try to find a song on my Ipod under a certain genre, but it doesn't appear in that genre because the incorrect information gets synched to the Ipod.

    Make sure that these two options in Edit > Preferences > Store are turned off:
    Then exit iTunes and open it up again.  Your metadata entries should then be persistent - with these options checked iTunes will be comparing what you have with the information held in the iTunes Store, and will overwrite with the latter for Store purchases (and if you have iTunes Match).  If you have any iOS devices you should also turn off Show All Music under Settings > Music.

  • Trying to install my first CC product the Adobe application manager keeps quitting unexpactedly, how can I fix that and downlaod my products? thanks

    Trying to install my first CC product the Adobe application manager keeps quitting unexpactedly, how can I fix that and downlaod my products? thanks

    Hi Yaniv,
    Would request you to share a screen shot of the error along with the system information so that we can proceed with the correct troubleshooting steps.
    Cheers,
    Kartikay Sharma

  • When i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync  options,how can i change that option,can any one help me.........?

    when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync  options,how can i change that option,can any one help me.........?

    I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
    Thanks very much for your feedback.

  • I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

    I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

    The top screenshot is the Windows Open dialog box. All File > Open... commands in all Windows programs bring it up.   Try File > Open in Notepad for example.
    It belongs to Windows not Adobe. You cannot change this because there is no such thing as an Adobe Open dialog box.
    The bottom screenshot is Windows Explorer. It is Windows' OS File Browser, not an Open dialog.  It is not called up by Photoshop or any Windows program.
    You have to click on "My Computer" or a Folder icon to get to it. You can double-click a psd, jpeg or other image file in the Explorer window so that it opens in Photoshop.
    There is Adobe Bridge and Minibridge   Alt + Ctrl + O or File > Browse in Bridge

  • When i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

    when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • I would like to have my bookmarks listed in the order of when I bookmarked them instead of in alphabetic order. How can I do that?

    I would like to have my bookmarks listed in the order of when I bookmarked them instead of in alphabetic order. How can I do that?

    Set the bookmarks to be unsorted, or maybe "sort by added". Use the Views menu in the toolbar in the bookmarks Library window.

  • I want to buy the creative cloud, have paypal and visa, but living in kenya.....adobe dent allow me :-( ... how can i get that product?

    i want to buy the creative cloud, have paypal and visa, but living in kenya.....adobe dent allow me :-( ... how can i get that product?

    Hi,
    Please check this link:
    Adobe Creative Software - Elite Digital Solutions | Apple Kenya
    Hope this helps!
    Regards,
    Sheena

  • I purchased a movie english version but when I went to play it it was in french how can I change to English???

    I purchased a movie english version on my ipad2 but when I went to play it it was in french how can I change to English???

    Hi dougy scrooge,
    It's great to hear that your problem got resolved.
    You can reach out to us if you have any other query in the future.
    We would be happy to help you.
    Regards,
    Anubha

  • When Subscribing to my Newsletter through my IWeb website, one is entered in EVERY Category; how can I change that!?

    When Subscribing to my Newsletter through my IWeb website, one is entered in EVERY Category; how can I change that!?  It's a convenient feature, to just pass out my biz card, and get newsletter subscribers.  But they don't seem to be able to choose categories; I always get notifications that they have been subscribed to every category (including ones that don't appear as options when they subscribe through the newsletter server).  HELP??

    How do they subscribe?
    Where is the newsletter?
    Where or what is the newsletter server?
    Where do they choose a category?
    Specify.
    Anyway, there is none in iWeb.

Maybe you are looking for