When I publish HTML Help from FrameMaker 12, I get a usable .chm, but if I copy the entire output folder to a network drive, I get a "Navigation to the webpage was cancelled" error instead of the content that shows locally.

I'm sure I'm missing something basic here, but any assistance is appreciated.

News flash – CHM on servers disabled – check out http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm

Similar Messages

  • Navigation to the webpage was cancelled  Error in Portal

    Hi All,
    I am getting error Navigation to the webpage was cancelled in SAP Portal when and select few of the
    application like SRM Application , Some external HTMl application.
    Bala

    Hi ,
    I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
    i.e. from HTTPS to HTTP .
    To resolve this issue you can you below options  :
    1. Change the IE setting which will allow the navigation from secure to non-secure environment.
    2. Use same protocol either HTTP or HTTPS (Basis  Team will help you in this )
    3. Use correct SSL certificate  (Basis  Team will help you in this)
    The First option is very easy , you just need to change the IE setting , Which is explained in
    sapnote 0001427561
    Regards,
    Piyush

  • The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

    I got this problem when I tried to configure out-going email and add an account to farm administrator group.
    I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
    Here are the screen shots.
    The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
    Anyone can help me about it? Thanks.
    Here is the log.
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    8gsf
    High    
    #160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
    characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         General                      
    8kh7 High    
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    7946 Critical
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
    server administrator.    at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message)     at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
        at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
    eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    The e-mail address I have tested it for several times and there is no problem.
    Anyone has any clue about this error?

    Hi.
    This I have seen before...
    It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
    It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
    It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
    If, its the builtin SMTP service you are using, check this link:
    http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
    Check that and try again.
    Regards
    Thomas Balkeståhl - Technical Specialist - SharePoint -
    http://blog.blksthl.com
    Download the SharePoint Branding Project here
    Download the SharePoint 2010 Site Settings Explained here

  • Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".   Anyone know how to fix this?

    Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
    Anyone know how to fix this?
    Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?

    HELP!!!! PLEASE!!!!!

  • I had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.

    i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
    I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    I am publishing directly to an FTP server (option 1).  Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
    I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums.  I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
    Maybe it is a publishing issue, or it could be a photo/file issue.  However, these albums aren't very large -- the largest containing 135 photos --
    Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
    I'm pulling my hair out here trying to diagnose the problem...

  • Code of Conduct - Saving was canceled , error key: RFC_ERROR_SYSTEM_FAILURE

    Hi all,
    we configured all kinds of ESS scenarions in EP 7.0 Portal.
    I get an error, when I try to to this in the Portal:
    ESS --> Corporate Information --> Code of Conduct -->
    then I check the "I accept..." Button and click on review. Now, when I click Send on the next screen, i get the error message:
    Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:828)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReview.onEvent(VcISRButtonsReview.java:254)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReview.onEvent(InternalVcISRButtonsReview.java:196)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReviewInterface.onEvent(VcISRButtonsReviewInterface.java:164)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReviewInterface.onEvent(InternalVcISRButtonsReviewInterface.java:148)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReviewInterface$External.onEvent(InternalVcISRButtonsReviewInterface.java:228)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReview.submitForm(VcISRButtonsReview.java:233)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReview.submitForm(InternalVcISRButtonsReview.java:188)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.ButtonsReviewView.onActionSubmit(ButtonsReviewView.java:151)
         at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalButtonsReviewView.wdInvokeEventHandler(InternalButtonsReviewView.java:161)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:779)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:714)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1255)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException:      Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.pcui_gp.isr.isrprocessevent.model.IsrModel.isr_Process_Event_Wd(IsrModel.java:406)
         at com.sap.pcui_gp.isr.isrprocessevent.model.Isr_Process_Event_Wd_Input.doExecute(Isr_Process_Event_Wd_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 65 more
    Can anyone help us out with this problem??
    Many thanks and best regards,
    Jasmin

    hi
    jasmin,
    Could you check if the RFC user in R\3. and the connection that exists b/w EP and R\3.
    You are getting this error due to the connection error between the two system.
    Check if this is configured correctly and is working.
    Thanks
    Santoshi

  • Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

    "There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
    PC - W7 Pro 64 bit, 16GB RAM etc.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.
    <!-- VERY important to include-->
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

  • "Connection failed ... There was an error connecting to the server"

    Hi,
    I have a late-2009 imac, running Snow Leopard and all the latest updates.
    However, since ugrading to ilife '09, I now see the following error
    "Connection failed
    There was an error connecting to the server
    "BeechMac". Check the servername or IP address and then try again"
    However, "Beechmac" was the name of the older G4 Mac from which I upgraded (using Time Machine) to the imac last year - and it no longer exists on the network.
    As a test, I copied over to this Mac Mini (also latest OS and updates) all the iphoto directory prior to update and then updated to ilife '11 - same problem is seen.
    I assume some files have some form of symbolic links to a networked partition ?
    The only difference to my network/system has been updating to ilife '11 - and all I use is iphoto.
    However, the error pops up every hour or so - and the mouse disappears and its tricky to gain mouse focus again to remove the message.
    I've scoured the Internet - but no help.
    - Paul

    I think I've identified the problem (or at least a solution).
    There were broken Alias links for some of the photos in my iphoto directory.
    I navigated Finder to the root of my iphoto collection and searched for "Kind: Alias"
    I then checked (using Right-Click:"Get info") that the Alias was working (if not a broken Jpeg icon was shown), and if not fixed up.
    It appears that in my system moves from taking photos from PC onto my original G5 Mac and then into iphoto (which had two partitions) some of the files had been aliased rather than copied. (Not sure exactly how this happened).
    Anyway, I was able to repair the broken file by going into the Terminal and copying the required JPEG onto the Alias.
    I wish there was an easier way to find broken Aliases - it was fairly tedious.
    - Paul

  • InvocationTargetException:There was an error while invoking the operation.

    Hi,
    I am having issues getting my remote server configured right after everything working properly on the local host. I am getting the following error:
    InvocationTargetException:There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
    The key parts of the large message I am getting after that are:
    Class "test" does not exist: Plugin by name 'Test' was not found in the registry; used paths:: ..../smii/test/  ID5D8FE3F-A1D1-4174-98B3-4BED10FD8FFE I79685B66-D792-E4E9-13B3-00004DA5951B  I0F94D267-0704-3C89-0B5B-0000090BA097  134950398900    
    I don't know how this last part of the address with random number and letters is getting there.
    Also, when searching for my server settings today it seems to add a "-1" on the end of the initial directory on the server...not sure why but I seem to be having major issues implementing the service remotely.
    Any help would be appreciated.
    Cheers, Andrew

    I also cannot get my flex server to validate. It always comes up with the error of the server is either off or wrong root url even when everything is set up right and I can access everything via either finder or the web browser.
    Any suggestions? The server does not have any fire walls up to prevent access.

  • There was an error connecting to the network, try again!

    I bought a new Computer (Mac Mini) with Snow Leopard installed; On joining the network(WEP128Bit) airport extremebasestation and airportexpress with WDS-mode) suddenly the basestation didnt offer WEP 128bit any more. I cant remember precisely but i think ist got something to do with the firmwareupdate of the AEBS or that i gave up WDS and changed to „extend a wireles network“ , well it only offered „WEP transitory“ which did not work properly for some reason;
    So i changed to WPA/WPA2 option and extending my network with the airport express.
    This worked fine; two computers with leopard, the new one with Snow leopard and a windows Laptop as well as two Mobilephones could easily join the network.
    BUT: My old Imac G4 with Tiger (10.4.11) could not join so easy.. (I changed the settings to WPA of course) The symptom was that on the right upper corner of the screen a message appeared saying: „there was an error connecting to the network, try again!“ and when i hit the „try again“ button up to 20 times then sometimes it suddenly succeeded to join.
    I was just about to look after the wirelesscard but tried before one thing: I changed my network channel on the AEBS from „automatic“ to Channel 11.
    From this time on i worked like a charm. I dont know why only the Imac G4 needed channel 11, but this solved my problem.
    Message was edited by: Alfi
    Message was edited by: Alfi
    Message was edited by: Alfi
    Message was edited by: Alfi
    Message was edited by: Alfi
    Message was edited by: Alfi

    Here is the list of DHCP Clients:
    http://home.earthlink.net/~jeffny0...ExtClients.jpg
    (MAC addresses scambled for security)
    I am not sure what 192.168.1.193 is ??? The 16 port Asante switch??
    Anyone know if there is a way to (easily) add "Client ID" names in XP? I went though my Macs and added names to help ID them in the router, but can't see where to add names in XP?
    IP Address: 64.110.135.46
    Subnet Mask: 255.255.255.128
    Router Address: 65.110.135.1
    (posting that does not compromise my security??)
    I think I need to figure out how to get the HP 4050 to renew its IP address? Then the router should assign an address to it.....I would like it to use the same address it has now so I don't have to recofigure addresses on the computers to print to it......hummm
    DHCP Begining Address: 191.168.1.2
    DHCP Ending Address: 191.168.1.200
    DHCP Lease: 4 (hours)
    COUPLE HOURS LATER......
    Just tried turning off the HP 4050 and unplugging it from the wall. Then plugging it (power) back in and turning it on, trying to get it to renew its IP address with the AirPort Extreme router.....nothing. Still does not show up in my list of DHCP Clients.
    Tried Restarting the router.....now I see no clients at all in my list of DHCP Client list..... grrrrrr
    Can anyone tell me why AirPort Extreme is not seeing the HP 4050 as a DHCP client?
    Jeff-

  • Navigation to the webpage was cancelled

    Hi All,
    I am getting error Navigation to the webpage was cancelled when i click on SRM Application.
    Bala

    Hi ,
    I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
    i.e. from HTTPS to HTTP .
    To resolve this issue you can you below options  :
    1. Change the IE setting which will allow the navigation from secure to non-secure environment.
    2. Use same protocol either HTTP or HTTPS (Basis  Team will help you in this )
    3. Use correct SSL certificate  (Basis  Team will help you in this)
    The First option is very easy , you just need to change the IE setting , Which is explained in
    sapnote 0001427561
    Regards,
    Piyush

  • Lync Server 2010 Control Panel - "navigation to the webpage was canceled"

    Hi All,
    I just installed Lync Server 2010. The SQL 2008 is installed on a separate box and both servers are on Windows 2008 R2.
    However, when I try to start the "Lync Server 2010 Control Panel"  i get a blank page with the following message "Navigation to the webpage was canceled"
    The Installation had no errors and went well. But I did have one problem in the Topology Builder where is asked to create a File Share and asked for FQDN and File Share. I entered "Server1.domain.com" and File Share "Poolshare" but it did
    not like it and error with a red cross saying.. 
    "FQDN Server1.domain.com is already used in this topology"
    So in the end I just change it to "Server1" then published and ran the installation sucessfully and all services are started OK
    Any idea? could it be that the file share is not using FQDN?
    Thanks
    ECL

    I have reveiwed this topic but have not been able to fing my answer. I am getting the same result when attempting to connect to the Lync Control Panel and the webpage saying "navigation was canceled..". Here are the details, any assistance is greatly
    appreciated:
    I have an existing OCS 2007 R2 server setup in the domain. My domain is company.CORP. It is a Standard Edition server for IM and Presence only. There is an Edge server as well and I have PIC enabled. My sipinternaltls SRV record to the current SE Front End.
    All works great. There is a SIP.company.com record in the domain too. I am standing up LYNC 2010 environment on HyperV and ran topology builder twice because I had to fix a name. (I see in Mac's comment that I need to run step2 again. Why is that?)
    My Share is on the HyperV server that is hosting the Front End server but they are completely different servernames. My topology published successfully and create some data in the File Share and the Backend DB was created and populated with tables. The certificates
    were successfully applied and all services started right up. The latest version of Silverlight was installed and the server was rebooted. Still the darn White Page with 'Navigation to the webpage was canceled'.
    I am able to go into IIS and launch the Control Panel successfully by browsing on the "cscp" directory for the Lync Server Internal Web Site. I can also connect to the Control Panel by using the
    httpS://admin.company.com/cscp but I have to put  'cscp ' in the path. I cannot browse AD using the Control Panel to find my TestLyncUser1 account but I can find the account, and successfully enable
    the account, using the Lync Management Shell. The account was enables and was able to successfully login to the Lync FE server (manually, since the SRV record point to OCS).
    This is where I am stuck. Why won't it launch from the Programs File Tool and why do I have to designate the CSCP in the URL? I am Not sure why I couldn't browse AD successfully in the Control Panel yet I could with Powershell. I will begin troubleshooting
    that issue next. Could it be because my sip.company.com record points to a different OCS Pool? Or my SRV internaltls record points to the OCS Pool? Microsoft supports standing up the two environments side-by-side and migrating but maybe I am missing something.
    Any ideas anyone?
    I want to add that I will be having a FE Pool and have named and published my second FE but I have not installed it. The Pool VIP is created in DNS and only pointing to FE1 right now.

  • Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC

    Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC? I would be grateful for any assistance.
    Here's the situation:
    -- I recently upgraded from RoboHelp X5 to RoboHelp 8. I upgraded my projects to RoboHelp 8 projects.
    -- One large help system I manage is built such that there is one master project and about 25 child projects. Each of these is its own item in the master project TOC.
    -- In RoboHelp X5 I never had any trouble deleting these.
    -- However now in RoboHelp 8, whenever I delete one (by opening TOC pod, right-clicking on item in question, and clicking Delete), and proceed to "Generate Primary Layout" (MS HTML Help), the generation/compilation process proceeds as far as "Generating full-text search data" and then the whole program crashes!
    Am I doing something wrong? Is there a bug in the software? I have installed patches 8.0.1 and 8.0.2.
    Once again, I thank you in advance for any pointers.
    Matthew Keranen
    Jamsa, Finland

    That does help - thanks a lot.
    Wayne Kroger
    State Street Corporation
    SQA-Princeton
    (609) 580-6264
    mail to: [email protected]
    The information contained in this email and any attachments have been classified as limited access and/or privileged State Street information/communication and is intended solely for the use of the named addressee(s). If you are not an intended recipient or a person responsible for delivery to an intended recipient, please notify the author and destroy this email. Any unauthorized copying, disclosure, retention or distribution of the material in this email is strictly forbidden.

  • There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)

    Hi there,
    When I'm trying to manage spaces in SAP Business Objects Explorer 4.1 SP04, I'm getting the following error:
    Failed to retrieve the data source list.
    There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)
    For input string: "false"
    I've already restart Explorer servers (Explorer Exploration Server, Explorer Indexing Server, Explorer Master Server and Explorer Search Server) and rebooted the server where Explorer is installed.
    Nothing seems to fix this error message. I'm not able to create new spaces because I cant access the sources:
    I'd appreciate some help !
    Thanks in advance

    HI Pavan,
    Admin is on the Administrators Group, which as Full Control on the Explorer Application
    I think this worked on the day the Explorer was installed (past week).
    Since them never worked.

Maybe you are looking for