When i put a disk in the disk drive the right keys slightly dim, normal?
i noticed that the keys such as l, k, , o , p ,; and some others go dim when i insert a disk into the disk drive, could this be bad, like something rubbing against the light wiring and will eventually fail?
Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964
Similar Messages
-
Hello so as you can see in my question i have troubles with my sound
I cant hear annything of my sound in game and i did check everything
The weird thing is that when i put my headphone in i do hear the sound
Also my music plays without my headphone
Wat can it be ? Pls help !Ok, a little clarification then, you can hear music fine with the speaker and headphone? You can hear a game's music fine with the headphone but not with the speaker? Do you get the notification sounds ok with the speaker?
If the speaker sound is acceptable with everything except the game then there is a problem with that game and its settings.
If that is the case, you might want to try deleting the game and then downloading and reinstalling the game to see if that helps the problem. -
I have reset my iPhone 5 and now it is asking me to activate my phone with my apple ID but when i put in my details in its say the my email address cannot be used to unlock my iPhone? help!
You need the Apple ID and password from the previous owner who set the Activation Lock. Where did you get this phone?
iCloud: Find My iPhone Activation Lock in iOS 7
Find My iPhone Activation Lock: Removing a device from a previous owner’s account -
how can i keep adding files to a dvd on my iMac? it keeps locking the disc when i put a file on it by saying the disc is ful
Take a look at this link, https://discussions.apple.com/thread/2079043
-
when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.
Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate. -
When I try to format an external usb drive the progress bar gets to half way then freezes , or stops and what ever time I allow it never gets any futher on , I have to go to the task bar and click quit to get on and the usb drive is not formatted is there a fault with my disk utility program I have updated the system
to lion 10.7.2
Can anybody advise pleaseAre these new external drives? How are the currently formatted? Have you tried doing this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive. -
I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please
Upgrade the version of itunes on the new computer
Itunes.com for free download.
Peace -
hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?
either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
PRAM http://support.apple.com/kb/ht1379 -
When I plug in my ipad it automatically tires to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?
You can open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
To move the current backup folder from C: to D: type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
tt2 -
When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.
A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
If you can reply with the brand and model of printer you have then we may be able to provide more information. -
I replaced the original hdd in my early 2008 iMac. I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant. When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!
I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore should be very smooth.
Roger -
DvD will not mount but cd-r will When I install the the disc into the super drive the format box (disc utilities) comes up which is not the same box that comes up when installing a cd-r. I check the priference settings under general and it is set to show on the desk top.
Not yet will have to get one from a freind. I bought a stack of the Sony DVD+R and that is all I have.
-
I am using iMovie 11 and have put down a piece of music which is fine. I have done all the adjustments that I needed so far. My problem is that i wish to add another piece of music and whilst I can move it on to the timeline I am unable to control it. I have no adjustments on the track like the earlier piece. Full volume only. Any ideas ?
Hey CarolinQc,
Thanks for the question. The symptoms you are experiencing can result from an Apple ID address that has been changed prior to signing out of all of the services. Before you change the email address associated with your Apple ID, you’ll want to sign out of all services to avoid this. As a fix, you can temporarily change your Apple ID back to the old address:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
- Scroll down and tap Delete Account, then tap Delete to confirm.
- Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
- Enter the password for your previous Apple ID.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Return to Settings > iCloud and sign in with your new Apple ID.
Additional Information:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M. -
Using Adobe photoshop elements 11 on a PC. When I put a photo up to edit the background on the page goes black. I need it to go back to white to do a thumbnail that has black background so I can see it. How do I do that. It used to be white on the background. Don't know how I got it all black. Can you help?
If you mean by "background" the blank work area that presents when you open the Editor, then right click on it and reset to white.
If I have this wrong, please rephrase your inquiry. -
Hi my ipad when i put on appers a dark blue in the screen and i cant open
hi when i put my ipad 2 on appears in he screen a dak blue color this is the only that i can see right now the ipad cant function
Try closing Game Centre via the iPad's multitasking bar and see if it works when you re-open it :
iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the Game Centre's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with Game Centre 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Game Centre app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
Submitting to broadcast and iTunes
This isn't so much a FCP question as it is a video production question, but with specific needs for iTunes. I'm just finishing my first music video for a record label and they will most likely be submitting it for broadcast and also to iTunes. I over
-
Hello, I've just started developing with the JDK 1.5 and CORBA. I've encountered a problem with the ORB and NameService of this JDK release. I'm calling the method: resolve_initial_references(String object_name) within the ORB class to resolve the "N
-
Please help. :(
-
When I change the next code (Adaptation unicode): IF t004-sakln > 0. *{ REPLACE &$&$&$&$ 1 * DESCRIBE FIELD ska1-bilkt LENGTH sy-fdpos. DESCRIBE FIELD ska1-bilkt LENGTH sy-fdpos IN CHARACTE
-
SB Audigy 2 ZS no sound ?!!
Just finished building my new system. The last thing i added is sb audigy 2 zs/ installed the drivers, every went fine. Went into creative diagnostics and tested my 5. speaker config, and it went fine. i hear sound from every channel. however when i