When I put a video in the timeline it's widescreen?

I just got this program for Christmas.. I've used something like this before but I'm a bit confused.
When I drag a clip into the timeline and go to watch it:
1- It doesn't play smoothly... it jumps from one scene to a different one.
2- it doesn't go in the screen to a full view?.. It goes in there as if it's wide screen... Is it supposed to do that?
Help me pleasseee

Thank you!
I'm going to go check it out right now.

Similar Messages

When i move my video into the timeline its zoomed in..how do i fix this? [was: I dont understand what is going on]

When i move my video into the timeline its zoomed in..how do i fix this? Please tell me what I can do to fix this. I may need to be walked through the process.

Your sequence settings do not match the footage specs.
Mylenium

After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!

I have bought Premiere three days ago. I am working on a AVCHD project, with clips from a Sony FS700 (1080 50p), and clips from a Sony CX730 (1080 25p). I can import the clips but for the CX730 clips it is impossible to put them on the timeline!!!!!
I can put the audio (5-1) on audio 4, but impossible to put the video... Everybody told me that Premiere support all the codec on the same project... It is not true!!!
Why????

Yes! you are right, every thing work well now!! Thanks a lot!
With my best regards.
Eric Dragesco
Chalet Capercaillie
Route des Renards 57
CH - 1882 - Gryon
Tel : 0041 24 498 33 48
Tel : 0041 79 244 47 11
Email : [email protected]
Web : www.ericdragesco.com
Le 3 avr. 2015 à 13:48, Ann Bens <[email protected]> a écrit :
After Import AVCHD from Sony CX730, IMPOSSIBLE to put the video on the Timeline!!!!!
created by Ann Bens <https://forums.adobe.com/people/Ann+Bens> in Premiere Pro - View the full discussion <https://forums.adobe.com/message/7401902#7401902>
are you sure the track are source patched?
v1, etc on the very left of the timine
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7401902#7401902 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7401902#7401902
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Pro by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 81>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

When i'm editing my video in the timeline it looks perfect, but when i save the video and replay it on quicktime it has these weird lines? does anyone know how to fix that?

when i'm editing my video in the timeline it looks perfect, but when i save the video and replay it on quicktime it has these weird lines? does anyone know how to fix that?

As Tom states, that's interlacing.
Interlacing was invented when the TV was born, to carry 1/5 the frame with each Hz of the electricity rating. In the US, that's why you use 30 fps (or 29.nnn) in the US and we use 25 fps in europe as the electricity is 60Hz/50Hz.
Interlaced video should ONLY (I repeat ONLY) be used for analog TV signal transports.
Each and every digital TV set today, including all the computer screens, is Progressive, updating the full frame at each screen refresh. And most TV's even refresh much quicker, newest TV's refresh a 800Hz..! (giving then problems with the newest LTE spectums..)
If your source media in interlaced, ask why! And stop shooting interlaced.. ;-)
If you have interlaced video, make sure you apply the DeInterlace setting when you import and transcode it.

Why can´t I pass videos to the timeline?

I was working fine, and suddenly I couldn´t pass my videos to the timeline, when I try to do it there´s a hand and a circle like indicating it is blocked or something. Why is this? How can I put it off?

Hey! Hang on... I was wrong about the Gspot settings being exactly the same. My newly captured video in Adobe Premiere Pro CS3 (800MB file size) also says "File Length Correct". My video originally captured in Adobe Premiere Elements 3.0 (it says 500MB file size, but it's actually 8.9GB) says:
"Corrupt AVI Header:
This is an invalid AVI file due to corruption of the data in the header. This is a serious problem, and this file is not likely to playable (I'm not the one who typed this sentence all screwy and without end punctuation)
Details: While processing chunk /RIFF:AVI, found bad length value 1069461800 at file offset 0x0000fc94"
Just to check if the other camcorder tape that I transferred in had the same problem, I checked my other video file with a supposedly 1,820MB file size, though it's actually 10.2GB, and that file says "File Length Correct".
So it looks like this is not a file corruption issue with upgrading from Adobe Premiere Element 3.0 to Adobe Premiere Pro CS3, but possibly a corrupt file. However, it works fine now and I haven't come across any video problem yet.
This also doesn't explain the bass boost problem, but I am going to focus on that now.
Thanks everyone for your input, and thank you Steve about the Gspot tip!
- Matt

Error when I put a component in the stage and I change any property

Hello
I'm using Flash CS4, as3 and adobe air file. I have an application with 3 scenes, first scene to login, second to set up, and third to see an video.
The problem is that, when I put a component in the second or third scene, if a change any property in the component inspector, any property it gives me error. So put the component and I change property by code in as3.
But I'm doing things with FLVPlayback component, and now before enter the scene gives me error, the solution will be to get the original properties, but I don't remember, I could install other time Flash CS4, but I can do that for any componet, better know the solution.
For example, I have an as file who is the class named p.e. MyMainclass, and in the scene3, I put FLVPlayback, who default values it's the last I used (I don't remember default after instalation), if any code in as3, it gives me this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at com.program::MyMainClass/__setProp___id2__scene3_myvideo1_1()[com.program.MyMainClass::__ setProp___id2__scene3_myvideo1_1:7]
I remove this component, I put another one I never used, it doesn't give me error, I change any property in the object inspector, p.e. color, it gives me error, I change to original property again, and then NO ERROR.
Thanks in advance

I would reccomend that you not use scenes for that purpose, not exactly sure why but scenes are unreliable. Try putting all of your content in one scene, one timeline and just add a few stop() 's at the end of each "scene", then in your code remove scene2 and scene3 three references, and you'll possibly need to change frame anchors/targets also if you have them.
The error indctates that you have called an object that does not exist at the time the code is run, check where you placed your code, should be frame one, scene1, and also check if you have objects entering the stage down the timeline, that do not enter in frame 1, possibly the movieClip? if so add another keyframe on your actions layer on the same frame as the object and enter the call function for it there.

Flash Pro, How can preview sound with the vidio on embedded video on the timeline

I am using a windows 7 based machine Flash Pro CC. I embedded the video on the timeline, basically a person talking. Want to put pictures in and out during certain times of the discussion but when I press play on the preview these is no sound. When I test publish the project I get sound. How do I get the sound on the embedded video to play on the preview?

Make sure that you have the latest version of > Safari 4.1 for Tiger
Then check and update your > Adobe - Flash Player

How come F10 does not put my clip into the timeline ?

How come F10 does not put my clip into the timeline ?
When I pressed F10, the sound icon appears instead.
Am I missing out something ?
Thanks

skalicki` wrote:
Technically, to make the function keys work you don't need to change the second box to dash. I don't know why I gave that advice, but it isn't necessary. I guess I said that simply because that's what I have it set to.
The reason there are two boxes is so that you can set Exposé to using both the function keys and the mouse. For example, if I have +All Windows+ set to F9 and Secondary Mouse Button, then it will show all open windows if I click F9 or right-click. That is why you actually don't need to have the second boxes for any of these set to dashes. You could set them to your mouse buttons, or if you wanted you could set the first box of any of these to any function key, as long as it isn't set to the same one as the key you want to use for your shortcuts within FCE.
I hope this made sense, I realize that I might not have explained it very clearly.
Message was edited by: skalicki`
Thanks skalicki, I think I got it. You've been of great help !!

When I drag a photo to the timeline on iMovie, a different photo appears. I've tried recreating thumbnails, and also created the problem photos in a test library.

When I drag a photo to the timeline on i-Movie sometimes a different photo, or even a video appear and sometimes it is just a black screen. I've tried recreating thumbnails, and even copied the problem photos into a test library, but still can't get it to work. Genius Bar kept my laptop 6 days and didn't do anything to help, just said the project was corrupt and I would need to recreate. Just tried a completely new project with totallty different photos and still experiencing the same problem. Anyone else had this issue?

Rob Case wrote:
I have created the same document SEPARATELY using both '08 & '09 versions of Pages. After creating the document in Pages '08 I 'Save' the file to my documents. And then email with attached file.
(1) I am not trying to 'convert' the same document from Pages '08 to Pages '09
(2) But I still can't understand why one version should act differently from the other even on an iOS device?
(1) It's not me which wrote :
> The file is formated for PAGES within the Share - Via Mail Options, not PDF or WORD.
(2) Simply because under iOS, the app isn't supposed to import iWork '08 files.
The internal description of the document is really different in '08 and '09.
To get more help, ask in the forum dedicated to iWork for iOS.
Here most of us aren't using Pages4iDevices.
Yvan KOENIG (VALLAURIS, France) vendredi 10 juin 2011 17:22:42
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

I use QT but when I put my video to WMM I got

I use QT but when I put my video to WMM I got the error 0xC946002C. Is it because I don't have QT Pro. I have a Pro key, but how can I get it to my new Windows 8.

Try rebuilding your iPhoto Library. Here's a link:
http://support.apple.com/kb/HT2638

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

How can i put my videos on the ipod classic

how can i put my videos on the ipod classic

See these 2 articles.
http://support.apple.com/kb/ht1333
http://support.apple.com/kb/HT2729
B-rock

IMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 . I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies. How do I fix this?

iMac Computer using 10.7.5, running iTunes 11.1.5, and using an iPad 2 with os 7.1 . I have over 300 movies in my library and when I share using video on the iPad, the titles covers are all on the wrong movies. How do I fix this?

Hi Michael,
I'm glad iTunes is working now! If you want to locate iTunes plug-ins on your computer, you can find them in the following locations (you may not have the iTunes Plug-ins folder if you do not have plug-ins):
Mac:
/Users/username/Library/iTunes/iTunes Plug-ins/
/Library/iTunes/iTunes Plug-ins/
One thing I also wanted to mention is that the "Users/username/Library" is hidden in Lion and Mountain Lion. You can access it using these steps:
OS X Mountain Lion: What is the Library folder?
The Library folder contains files used by OS X and your apps, including your personal fonts and preferences. The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
You can find the full article here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
All the best,
Sheila M.

How do I move just the Video to the timeline in Premiere cs6, not the audio?

how do I move Just the Video to the timeline in Premiere, not the audio?

Hi there! I'd try posting this over in the official Premiere Pro forum: http://forums.adobe.com/community/premiere/premierepro_current?view=overview
The Premiere experts over there are more likely to help you out with your problem

When I put a video in the timeline it's widescreen?

Similar Messages

Maybe you are looking for