When I put music into the stage and pause it, it keeps playing.

I just started to use Adobe Flash CS6 and I'm having problems. When I import audio to the libary and then drag it to the stage it shows up in the frames perfectly. When I press play it works but when I pause the audio it doesn't pause, it just continues playing and doesn't stop until the audio ends. This makes it extremely hard to sync up the animation to the audio !
Please help !

click on the keyframe where you added your sound.  in the properties panel change the sync property from event to stream.  retest.
p.s. please mark helpful/correct responses.

Similar Messages

  • When I put music on the stage, when I pause it midway it stops, then when I hit play, it plays the movie, but with no audio

    So I want to pause the audio midway, and play it again from where I left off, but it doesn't let me do that. It plays the rest of the movie without audio. So I would have to rewind the whole animation to hear it. This makes syncing animation pretty hard. Any ideas on how to fix this?

    It sounds like you have placed the music into a keyframe on the timeline of your movie. Go to that first keyframe and select it on the timeline, then go to the Properties window. Set the Sync option to Stream. This should allow the sound file to work as you want.

  • I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted!

    I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted! All my other pictures that i have taken are still there, it just deleted the ones I took a couple of hours before it died!
    I was just wondering if there is anyway of getting them back at all? and how common is this?

    Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
    Where did you get the iPhone?

  • I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder?  How do I get access to it to install?

    I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder?  How do I get access to it to install?

    Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

  • HT5527 I am using an older browser and OS because I cannot upgrade right now. I can access my email but cannot seem to put anything into the TRASH and if I do get some things to go in, I cannot empty. I would love to get compliant with my 5gb of free stor

    I am using an older browser and OS because I cannot upgrade right now. I can access my email but cannot seem to put anything into the TRASH and if I do get some things to go in, I cannot empty. I would love to get compliant with my 5gb of free storage!

        We are sorry to have lost you as a valued customer ndl9! I'm sorry to hear of the difficulties you are having with trying to pay your final bill. Our best recommendation is the pay my bill link, which should allow you access based on your former phone number or account number. Did you try both? As an additional option, you can reach our automated system from an alternate line by dialing 800-922-0204 and then entering your former wireless number. http://vz.to/1fdEQVi
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • How do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

    how do I get data off  my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • I have bought some songs on iTunes and it won't sync the lyrics when I put them into the song??

    When I click on edit the go over to lyrics and I paste the lyrics and click sync the lyrics don't show up

    Audiobooks in iPhone should be in the Music app under More.

  • I have a 13 sec clip that gets shortened to .5 sec when I drop it into the project and can't adjust the destination to the source length

    I created my clip from 3 PPT slides (as movies, one of the options) and it imports into the event browser fine.  I am using the theme Forever is never long enough and it has little boxes where you are supposed to drop your clips.  When I drop them in, the clip only plays for the destination duration time.  If it is .5 sec but the source is 13 seconds, it won't let me adjust it to play the full 13 seconds.  Anybody know how to adjust them?

    It appears that you are using a Trailer (as distinct from a Theme). These are templates designed to give you a quick preview, similar to trailers you see at the movies. The clip lengths and music are all preset so that the video works perfectly in sync with the audio soundtrack. They are intended to be short, sharp and shiny - hence the very brief snippets of video employed, together with the accompanying matching music.
    A Trailer template can't be altered unless you convert it to a standard project. To do this conversion, firstly, it's a good idea to duplicate the Trailer. In Project Library view (where all your projects are listed) click on the name of your project then from the menu select File>Duplicate Project. Now click on the duplicate and from the menu select File>Convert to Project. Now you can edit the converted duplicate Trailer just like a normal project - but bear in mind that changing the clip durations will cause the video to go out of sync with the supplied soundtrack.
    Unless you are doing a highlights reel, your best option is to create a normal project from scratch, rather than using a Trailer template. When you create a new project you are given options as to whether you want to use a Theme or No Theme. Themes are quite different from Trailers and serve a different purpose. They help to spice up your video by introducing snazzy titles and transitions. You have complete flexibility as to clip lengths, transition styles, added music tracks and so forth.
    Hope this helps to clear up any misunderstanding you may have regarding Trailers versus Themes.
    John

  • My itunes will not pick up my ipads when i put it into the usb ports...???

    Hi all,
    I'm having a problem where neither of my ipads are being picked up by itunes when they are pulgged into any USB port.... They used to only 3weeks ago...
    The only thing i have done is purchased an Ipod of ebay, and loaded music on to it....  i have only just found out the ipod is  still registered to who ever had it before....
    Is this the problem and any ideas how to solve it guys....?

    Two separate problems.
    For your iPads, try going into the control panel, add/remove programs. Uninstall iTunes, Apple mobile device service, Apple application support. then redownload and reinstall iTunes
    See if it sees your ipad now.
    For the iPod, what you've run into is the activation lock. It's a new feature of iOS7 where an owner's apple ID is needed to wipe a device. If the ebay seller cannot or will not give you that apple ID, contact ebay and return the iPod. There is a very good chance that your ipod is stolen (or at the very least not the seller's to sell).
    If you can't unlock it, you've bought a brick so get your money back.

  • My macBook Air is not charging anymore when I put it on the power and now is completely off

    Please help me with my macBook Air not charging anymore

    Welcome to the Apple Support Communities
    First, reset the SMC > http://support.apple.com/kb/HT3964 If this problem is related to software, this should fix this problem.
    If it doesn't work and you can start your computer, open System Information or System Profiler (it's in /Applications/Utilities), choose Power in the sidebar, and copy here "Charge Information" and "Health Information".
    If you can't start the MacBoook, the only thing you can do is to take your computer to an Apple Store or reseller

  • If I've loaded my music into the iCloud, do I need to keep it on my Mac or will it be "lost"?

    Perhaps I should address this to the iTunes community.  I've uploaded 14,000 songs currently on my Mac into the the iCloud, paying the $24.00 annual fee.  Can I safely delete those songs from my Mac and still access the music from iCloud?

    Can I safely delete those songs from my Mac and still access the music from iCloud?
    There are several reasons, why you need a local copy plus a backup of your iTunes library.
    iTunes Match is relying on the iTunes Store. If purchased songs are no longer available at the Store, you cannot download them again from iCloud.
    There may be matching errors. You need your local copy to be able to hear the correct song, if the match went wrong. I found several songs in my library that have been matched to completely different songs.
    There may be upload errors. If a song did not upload correctly because of transmission errors, you need a local copy to restore it to your library.
    If iTunes Match is down, or your Internet connection down, you will not be able to listen to your Music at all.

  • Why is my iPod showing a no sign when i drag music into the itunes library and how do i fix it

    when i go into itunes and in my desktops music library, i open itunes and click on on this ipod. when i want to drag my music it wont let me and show a red no sign. my sister has the same ipod but doesnt have this issue. please help me fix it, this has been going on for a little under a year now.

    Do you have iTunes set up to sync manually? That is required to drag and drop
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    Do you have any Restrictions set that would prevent syncing those songs? Settings>General>Restrictions

  • My iPod touch 5 is unresponsive and won't turn on. My home button is stuck so I can't reboot it.. Any other way?  My ipod turned off when I put it on the charger and now won't come back on

    iit's ios8 5g 32G I have no idea what to do now please help

    Your issue has nothing to do with Apple networking. You may get better results posting to one of iOS areas of the Communities.

  • Why does my ipod not work when i plug it into the wall and work when i plug it into my computer?

    hello?

    What do you mean by works?  Do you mean the battery chares on the computr but not with the wall charger?
    Did the wall charger ever charge the iPod?

  • Why does my mac say it's not charging when it is plugged into the wall and has a green light?

    It is also not fully charged, its on 20%

    MacBook Pro 
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os
    http://www.apple.com/support/macbookpro

Maybe you are looking for

  • S-Video output on Z61t

    I am driving myself crazy trying to get my s-Video output to work on my Sony Plasma TV.  My Z61t has Mobile Intel 945.  I have updated to the most recent drivers. Everytime I try to validate TV settings using the Presentation Director it says I do no

  • VENDOR_ADD_DATA & VENDOR_ADD_DATA_CS

    Hi,   I am Using VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS to enhance my Vendor Master screen. It is working fine and I am getting a addition button, clicking on which my custom screen is displayed. My requirement is this button should only get displaye

  • Hierarchy functions and OLAP

    Hi, In 11.1.1.5, did anyone succesfully use hierarchy navigation functions "IsDescendant" or "IsChild" in derived logical column mapped to OLAP dimension? What works for me: - "IsLeaf" function for both OLAP and relational db - "IsDescendant" / "IsCh

  • IBRD reads expected response unde ICBC but does not in QBASIC

    when I use ibwrt with my device, it works OK in all cases (I assume). When I read with ibrd, it reads OK when only one number is in the response, but when there are three numbers, it does not read a bit. I set receiving string variable to " ", so it

  • DNS GUI will not display Zone entries

    Hi I have an Apple Intel Xserve running 10.5.8 I have added hundreds of entries into our DNS using the GUI I have just tried to add a new CNAME Server admin then "stopped responding" - I used force quit to kill off the application Now when I launch S