When I put my earphone in the sound isn't clear

When I put my earphones in the sound isn't clear.
There's a new head jack in as well.

Hi Mr.Acevedo329!
I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
Specifically, you will want to take note of this section:
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

  • When I put in my earphones to listen to music the sound isn't clear and I have to push and hold them in it in order for it to be. It's not the earphones because I use them in my laptop and they work fine. Is there a way to fix this problem?

    Whenever I put my earphones into my iPod Touch 2g the music isn't clear and I have to push and hold them in order to hear the song normally. It isn't the earphones because I tried another pair, that worked fine, and there was still no difference. I also use the same pair of earphones in my laptop and it sounds great. Is there a way to fix this problem without having to buy a brand new iPod touch? Do I need to clean it or something? And if so, how would I go about doing that? Thanks!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    If still problem that indicates you have a bad headphone jack.
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Likely not worth it for your old 2G iPod
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • When I film something the sound isn't recorded... why?

    When I try to film something, the sound isn't recorded only the images. Does anybody know what is the problem? In the begginning it used to record everything but after I don't know what happened and when I play the movie in the top of the screen appears like a line showing the fragments of the whole movie and a bar goes passing over the images like a timeline....

    The same thing happens to me. But in my case my 12yr old son noticed that I cover the phone's speakers with my hands while filming, not that thats your case. I just thought to tell you cause its funny is all. Hope some one can assist you. Good luck.

  • My iPod's headphone jack isn't working anymore, when i put my headphones in , the left l, My iPod's headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

    My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

    Hi Mr.Acevedo329!
    I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
    iPod troubleshooting basics and service FAQ
    http://support.apple.com/kb/ts1382
    Specifically, you will want to take note of this section:
    The headphones don't work
    If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My iphone screen is not turning on.when i put it on charging it sounds like it is charging but screen remains black.nothing is happening just i listen sound..plzz help

    My iphone screen is not turning on.when i put it on charging it sounds like it is charging but screen remains black.nothing is happening just i listen sound..plzz help...i m using iphone 2g 3.1.3

    Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
    If this does not help, try to connect in recovery mode, described here: iOS: Unable to restore

  • When i put mi audiphones in the ipod (80 GB) i only hear static

    When i put mi audiphones in the ipod (80 GB) i only hear static, and i have to move the audiphones to hear something but it still haces that kind of static i thing it makes false contact in the input of the audiphones but i dunno.
    How can i fix it

    In the headphone port on you iPod try turning the little earphone plug a little untill you stop hearing static. I do that for mine.

  • My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

    my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

    Take a look at this link, http://support.apple.com/kb/TS1538

  • My macbook keeps freezing when i put my password in the unlock my computer

    my macbook keeps freezing when i put my password in the unlock my computer

    Hi scottschierer,
    Welcome to the Apple Support Communities!
    I understand that your computer reaches the login screen but does not load the Desktop after you log in. In this situation, I would recommend working through the troubleshooting steps located in the attached article to help resolve the issue. 
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
    Best regards,
    Joe

  • When watching a movie in Itunes the sound does not match the lips

    when watching a movie in Itunes the sound does not match the lips, is this normal? & If I purchase a movie will it play like a normal dvd?

    Try the suggestions in this thread.

  • When i put my iPhone in the logitech dock and i start the music it stops at exactly 1 Minute. What's the problem? I cleaned the contacts, the same happened again. always after 1 minute the music pauses!

    When i put my iPhone in the logitech dock and i start the music it stops at exactly 1 Minute. What's the problem? I cleaned the contacts, the same happened again. always after 1 minute the music pauses!

    It is a known issue and un-conventional remedy.
    It is Hardware failure. I would get the iPhone changed for a good one.

  • When i put my sim in the phone i.e iphone 4s it said that your phone will be activated in  minutes and then it gave a message related to sim so what does it mean is my phone locked i got it from uk

    when i put my sim in the phone i.e iphone 4s it said that your phone will be activated in  minutes and then it gave a message related to sim so what does it mean is my phone locked i got it from uk

    Probably , but what is the message

  • How do I delete old email addresses from the pop up list that comes up when I put a letter into the "To" box. These addresses are not in my address book.

    How do I delete old email addresses from the pop-up list that comes up when I put a letter into the "To" box? They are not in my Address Book.  Wrong addresses get in the way and I sometimes select the wrong one.

    Edit the list the comes up when you go to the Window menu and select "Previous Recipients".
    charlie

  • HT1420 Why does my computer keep asking to be authorized when i put my iphone on the charger?

    Why does my computer keep asking to be authorized when i put my iphone on the charger?

    Authorization and Deauthorization
    See iTunes Store- About authorization and deauthorization for Macs.
    See How to Authorize or Deauthorize iTunes | PCWorld for Windows.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • Error when I put a component in the stage and I change any property

    Hello
    I'm using Flash CS4, as3 and adobe air file. I have an application with 3 scenes, first scene to login, second to set up, and third to see an video.
    The problem is that, when I put a component in the second or third scene, if a change any property in the component inspector, any property it gives me error. So put the component and I change property by code in as3.
    But I'm doing things with FLVPlayback component, and now before enter the scene gives me error, the solution will be to get the original properties, but I don't remember, I could install other time Flash CS4, but I can do that for any componet, better know the solution.
    For example, I have an as file who is the class named p.e. MyMainclass, and in the scene3, I put FLVPlayback, who default values it's the last I used (I don't remember default after instalation), if any code in as3, it gives me this error:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at com.program::MyMainClass/__setProp___id2__scene3_myvideo1_1()[com.program.MyMainClass::__ setProp___id2__scene3_myvideo1_1:7]
    I remove this component, I put another one I never used, it doesn't give me error, I change any property in the object inspector, p.e. color, it gives me error, I change to original property again, and then NO ERROR.
    Thanks in advance

    I would reccomend that you not use scenes for that purpose, not exactly sure why  but scenes are unreliable. Try putting all of your content in one scene, one timeline and just add a few stop() 's at the end of each "scene", then in your code remove scene2 and scene3 three references, and you'll possibly need to change frame anchors/targets also if you have them.
    The error indctates that you have called an object that does not exist at the time the code is run, check where you placed your code, should be frame one, scene1, and also check if you have objects entering the stage down the timeline, that do not enter in frame 1, possibly the movieClip? if so add another keyframe on your actions layer on the same frame as the object and enter the call function for it there.

  • Error on Siebel 8.1 Tools when I put more clobs on the table.

    I am getting an error on Siebel 8.1 Tools when I put more clobs on the table SBL-DEV-61032. This used to work in 8.0 tools.  Any ideas on how I do it in 8.1.

    Hi,
    Thanks for the post.
    I could find below document
    SIEBEL LIMITS CLOB COLUMNS TO THREE PER TABLE (Doc ID 1050304.1)
    As per this article Siebel does not allow CLOB more then 3 in a table.
    Please let me know if this helps.
    Regards,
    Hari Meena

Maybe you are looking for

  • Issue in Color Theme on the map with ADF geographic components

    I am facing an issue in bringing up a map using color theme .I can able to bring up a map with color themes using geographic components feature in ADF. The problem here is 'Edit Color Map Theme' dialog which lists Map Theme in five categories like co

  • Ipod sometimes not playing songs..

    my ipod lately has been not playing certain songs. it will skip through the album until it finds one it wants to play i guess is the best way to describe it. it doesnt happen to the same albums every time. when i reset my ipod (select+menu) it someti

  • Captivate 6

    Can some help in finding and downloading the free trial of Captivate 6? Thanks.

  • Safari stops playing mov files in Lion

    Having just upgraded to a new iMac i7 2gb graphics and 8gb of ram, I was very annoyed to find that what works fine on my old 2core iMac running snow Lepoard fails on lion. My current problem is .mov files stopping when embedded into a web page. After

  • 0KSCHL_TEXT condition type extractor to BW infoobject

    Hi Has any of you using this extractor that bring condition type text data? I have observed that it brings text  data from R3 T685T, which has primary key based on 4 fields. In the BW, It is suggested to map this extractor  to business content infoob