When I re-start Firefox, it does not come back in the last opened websites

In other versions of Firefox was it possible if I re-started the browser of firexox, that all websites which were open... that the last opened websites came back (if I choose for that), I could also make a choice to refresh the websites and open with the startpage.
In the versions 4, 5 and 6 of Firefox was it not possible to start with the solution of the last opened internet-websites. Every time if I got an update from software or I installed new software it was for me easy to restart Firefox and get the same websites back, so I could work further...... Now it's neccasary to save and write down all the different url's (sometimes 20 or more tabs) befor I can restart Firefox or Windows.
I'm disabled and bedridden and I want this solution back.... so is that possible?
Thanks for so far.

Please check here to see whether Firefox is available for your phone:
https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

Similar Messages

Good morning, I returned a few days abroad (Antigua), 4 my iphone does not come back to the correct time of Rome in automatic mode but only manually, there is a solution to restore the correct time in automatic mode? ? Thank you.

Good morning, I returned a few days abroad (Antigua), 4 my iphonedoes not come back to the correct time of Rome in automatic modebut only manually, there is a solution to restore the correct time in automatic mode? ?
Thank you.

Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How do I close an app so that when I restart it, it doesn't just come back with the last screen, i.e. I want to be able to restart the app from new, not a follow-on

How do I close an app/session, such that when I restart it, it doesn't come backat where I left off, e.g. Safari, I want to restart with a new screen, not the one I previously closed from
Thanks

Depending on how the app is programmed, generally to force close an app, double tap the home button. You'll see the app icons and previews on the screen. Scroll sideways if needed to bring up the app in question. Flick the preview for that app up and off the screen. then single tap the home button or the home page preview to exit the mode
The app should then reboot from closed instead of just reopening

Vertex tax information does not come back to SAP

Strange problem that we are having.
We have a situation where the taxes calculated back from Vertex somehow does not come back to the billing document upon billing document creation. However, this problem seems to be rare and intermittent, but happens regardless.
The problem doesn't seem to be configuration because billing documents for the same customer and material are successfully calculated for tax. Also, if the incorrect billing document is re-billed, the taxes come in correctly. I already checked VK13 to make sure that all the condition types are coming in correctly.
Also, Vertex seems to have been able to receive the parameters that is used for calculating the tax as the Vertex log shows that the tax information was calculated correctly, but for some reason, this tax does not make it back to the billing doc.
Has anybody had this problem with Vertex?
Thanks

Paul,
I read your problem and most likely there is addtional configuration that may need to change depending on the details of your SAP and Vertex deployment. You can reach me at Vertex to discuss this issue. Some addtional details about which version of SAP, which product and version from Vertex, how it is deployed, etc will be some of the items we can discuss. As an example, this could be a memory issue and you need to enable more listeners....sometimes this happens when the RFC gateway can't keep with the responses from the external system. Kevin Toner

Just upgraded to latest iOS and my iPad does not come back up. It displays a line to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else.

Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

My daughter forgot her password and now her ipod touch is disabled. When I connect it to itunes it does not come up on the screen as a device. What can I do to get her itouch working again?

My daughter forget her password and now her ipod touch is disabled. Red message says to connect to itunes. When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the password to access it. I cannot access the password and since itunes does not recognize the device, it does not come up on the list on the left, i cannot reset it. What do I need to do so she can use her ipod touch again? Thanks

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

HT3964 the indicator light on my mac book pro does not come on and the computer will not start

what can i do if the indicator light on my mac book pro does not come on and the computer will not start?

Here are a couple of trouble shooting articles that may assist you:
http://support.apple.com/kb/ts1367
https://discussions.apple.com/docs/DOC-3353
Ciao.

Host Command does not come back

Hi,
I have treid to export schema by pressing a button, (form designed in Form10gR2 and excute via Application Server R2. )
For this I have applied one by one these syntaxes
1) host ( 'cmd /C start "" "'|| exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
2) host ( 'cmd /C exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
3) client_host('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
4) WEBUTIL_HOST.NONBLOCKING('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
When my client/ user executes the command, session goes hang and application screen does not come back. If I execute the exp command directly from the Application Server Command Prompt then exp works.
Please help me, what is the syntax to get the dump wihtout hanging the session.
Database 11g Linux
Application Server 10R2 Window2003.
Developer 10gR2.
Client Windows , Explorer, FireFox etc.
Regards.
Priya.

Hi Priya,
It is always a better practice to call a batch file using the host command instead of hardcoding the command inside form. Which would help you to modify the batch file for any changes, without re-compiling the forms.
In this case, create a batch script, which would set the ORACLE_HOME etc (to make sure the exp command is recognized, you need to add the DB ORACLE_HOME/bin to the PATH), and then call the command to export. You can also parameterize the batch script and pass the parameters from form, separated by space.
-Arun

MBP does not come back after hybernation

Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
Mark

Hello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark

HT4367 Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Apple TV uses iTunes. The reason you can't rent through your ATV is because you can't rent movies through iTunes Canada. Sadly, as this is a user-to-user forum, no one here would know when or if rentals will come to Canada.

Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but no app sounds.

Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but I can't here the sounds from deleting photos, clicking on apps that are on my iPad. It does this every time I unmute my iPad. Please advise.

Hello PearldiamondMD,
I was thinking of a few recommendations for you. I recommend our iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1. Start at section 1, if that doesnt fix it, then section 3, and if all else does not work, section 5. At section 3 I recommend closing ALL the apps.
Here is section 1 to get you started.
Restart iPhone
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
All the very best,
Sterling

HT5312 What if it does not come up with the option to reset and you do have a rescue email address?

On my account, when i select manage acount and go to password and security it does not come up with the option reset security questions and answers. Therefore i have been searching whole websites for days and contacting itunes yet i have not been told a solution yet. How do i reset it?

You are sure that you have a rescue email address on your account and not just an alternate email address ? If it is a rescue address then you should be able to go tohttps://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If it's not a rescue email address then see if the instructions on this user tip helps :https://discussions.apple.com/docs/DOC-4551

When I re-start Firefox, it does not come back in the last opened websites

Similar Messages

Maybe you are looking for