When i reboot it marks some msgs as unread

after upgrade to ver 5 whenever i reboot using alt+shift+del, once it reboots it sends me an email that your bb has been registered with the network as if i had just did the initial setup on the phone  or had my service books resent?? and also it marks about 6 sms and 8 emails that i have already read as unread....???
granted, as far as i can tell it dont change anything major just a pretty good nuisance!!
anybody else had this happen ???
Democracy is two wolves and one sheep voting on what to have for lunch; Liberty is a well-armed sheep contesting the vote! - - Benjamin Franklin

thanks for the reply, figured i wasnt the only unlucky  one to notice this. oh well, hafta say is the only glitch that affects me very much. that and the mute button standby thingy.  and the sms threaded screen is a little cramped..... just a note for ya you dont have to delete if ya dont wanna, can mark them all as read all at once is what i do....
Democracy is two wolves and one sheep voting on what to have for lunch; Liberty is a well-armed sheep contesting the vote! - - Benjamin Franklin

Similar Messages

  • My form has a list of yes or no questions.  I want to use either cheboxes or radio buttons.  I can't make it work.  When I check yes for one question, it marks all yes answers for all other questions.  If I mark some radio buttons to answer, it unmarks la

    My form has a list of yes or no questions.  I want to use either cheboxes or radio buttons.  Unfortunatly I can't make it work.  When I check yes for one question, it marks all yes answers for all other questions.  If I mark some radio buttons to answer, it unmarks later.  Need immediate help!!!

    Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
    For example, if you had:
         Question 1 and Question 1 Yes/No checkboxes
         Question 2 and Question 1 Yes/No checkboxes
         Question 3 and Question 1 Yes/No checkboxes
         Question 4 and Question 1 Yes/No checkboxes
    Then whatever answer you selected in Question 1 would populate down through the rest of the form.
    Changing the Yes/No field properties in questions two through four would eliminate the problem.
    I hope that helps,
    Brian

  • I have iPhoto 09 version 8.1.2 when I double click on some of the pictures, I see exclamation mark.

    Hello,
    I have iPhoto 09 version 8.1.2, when I double click on some of the pictures I see exclamation mark instead of my pictures.
    Thank you
    Fereydoun

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

    Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

    thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess. 
    That would convenient, but sadly it is not the case. Sorry!
    Either way your welcome and best of luck!
    B-rock

  • I switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.

    i switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.
    I bought this off of craigslist with my christmas money, TODAY. i really need help, i have OS X experience from school, just not OS 9x. I need to reboot back to OS X asap. anything that may help is very appreciated. Thank You.
    Chris.

    Are you able to start up in Safe Mode?
    http://support.apple.com/kb/HT1455?viewlocale=en_US
    If this works you will see the normal desktop Once completely started up in Safe Mode, try to restart normally and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless it has been renamed). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if you are able to do a little hard drive maintenance to help things out.

  • LOG_FILE_NOT_FOUND when running cleaner manually after some data purge

    I hit LOG_FILE_NOT_FOUND error when running cleaner manually after some data purge, I searched the forum, found someone also faced the same issue before, but cannot find any clue on how to fix it. Below is the error trace and followed by our configurations
    Caused by: com.sleepycat.je.EnvironmentFailureException: (JE 4.1.6)
    Environment must be closed, caused by:
    com.sleepycat.je.EnvironmentFailureException: Environment invalid because of
    previous exception: (JE 4.1.6) /scratch/tie/thirdeye/index/data-store
    fetchTarget of 0x50f/0x3fb9dd6 parent IN=368491717 IN
    class=com.sleepycat.je.tree.IN lastFullVersion=0x510/0x2ca7d18
    parent.getDirty()=false state=0 LOG_FILE_NOT_FOUND: Log file missing, log is
    likely invalid. Environment is invalid and must be closed.
    at
    com.sleepycat.je.EnvironmentFailureException.wrapSelf(EnvironmentFailureExcept
    ion.java:196)
    at
    com.sleepycat.je.dbi.EnvironmentImpl.checkIfInvalid(EnvironmentImpl.java:1439)
    at com.sleepycat.je.Environment.checkEnv(Environment.java:2117)
    at com.sleepycat.je.Environment.checkpoint(Environment.java:1440)
    at
    com.oracle.thirdeye.datastore.DataStoreManager.clean(DataStoreManager.java:402
    at
    com.oracle.thirdeye.infostore.InfoStoreManager.clean(InfoStoreManager.java:301
    ... 11 more
    Caused by: com.sleepycat.je.EnvironmentFailureException: Environment invalid
    because of previous exception: (JE 4.1.10)
    /scratch/tie/thirdeye/index/data-store fetchTarget of 0x50f/0x3fb9dd6 parent
    IN=368491717 IN class=com.sleepycat.je.tree.IN
    lastFullVersion=0x510/0x2ca7d18 parent.getDirty()=false state=0
    LOG_FILE_NOT_FOUND: Log file missing, log is likely invalid. Environment is
    invalid and must be closed.
    at com.sleepycat.je.tree.IN.fetchTarget(IN.java:1332)
    at com.sleepycat.je.tree.IN.findParent(IN.java:2886)
    at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:881)
    at com.sleepycat.je.tree.Tree.getParentINForChildIN(Tree.java:809)
    at
    com.sleepycat.je.cleaner.FileProcessor.findINInTree(FileProcessor.java:1152)
    at com.sleepycat.je.cleaner.FileProcessor.processIN(FileProcessor.java:1090)
    at
    com.sleepycat.je.cleaner.FileProcessor.processFile(FileProcessor.java:538)
    at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:241)
    at com.sleepycat.je.cleaner.Cleaner.doClean(Cleaner.java:463)
    ------------Configurations-------------------------
    EnvironmentConfig.ENV_RUN_CLEANER -> false
    EnvironmentConfig.CHECKPOINTER_HIGH_PRIORITY -> true
    EnvironmentConfig.CLEANER_EXPUNGE -> false
    Any hints are appreciated. I'm also working for Oracle CDC, feel free to call me at 861065151679 or drop me an email at [email protected] so that we can talk more in detail
    Anfernee

    Anfernee, I will contact you via email.
    --mark                                                                                                                                                                                                                   

  • When I reboot in Windows 7 partition, it comes up with an error.

    Hello all,
    I have recentry formatted my Primary Partition for windows 7, and when i reboot to the HHD, it comes up with an error; "Windows failed to start. a recent hardware or software change might be the cause".
    Under i get some options;
    1, insert the installation cd
    2, choose language settings
    3, click repair
    Under that i get this;
    File: \Boot\BCD.
    Status: 0xc000000f.
    Info: An error occured while attempting to read the boot configuaration data.
    I have previously performed numerous steps such as moving and copying the BCD store to another partition and i also tried bootrec.exe in command prompt, when i select repair system, but nothing worked. I have also tried rebooting with the windows 7 installation cd and i also tried to perform a clean install, but it stops with an error after i reach 24% at the expanding files bit of the installation, therefore it fails and restarts again, this too, hasn't worked.
    Now i am stuck with the operating system that cannot start, and the BCD store that cannot be moved/reset somewhere else.
    Please, can someone help me with this error? Thank you very much.

    ERRORS WIN: iPhone iPad Ipod Touch Connection Error
    OxE   =   http://support.apple.com/kb/TS3221

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Signing: Empty list in "Field Selection" when picking fields to mark as read-only on signing

    I have a PDF form with some signature fields. I am attempting to mark some of the fields in the document as read-only when the document is signed. This is what I did:
    1. Modify the "Signed" properties of the signature field.
    2. Choose "Mark as read-only" and "Just these fields" in the drop down list beside this option.
    3. Click on the "Pick" button to select the fields to be marked read-only when the user signs this field.
    In the "Field Selection" dialog that comes up, nothing is shown in the list.
    Am I doing something wrong? Is there something I need to do to add fields to this list, or should it be populated automatically allowing me to choose what I want?
    I noticed this feature is only available for Acrobat 6.0 and later. The compatibility level for the document I created is 1.6 (Acrobat 7 and later). It is created in Acrobat X.
    Just figuring my way around these things. Did a google search for any solutions, but couldn't find anything on this.
    Any help would be greatly appreciated.
    Thanks,
    Ron

    Hi Ron,
    It certainly sounds like you are on the right track.What version of Acrobat are you using, is it Pro or Standard, Mac or Win? I see where you mentioned the file was created in Acrobat X, but I'm not sure that the app that create the PDF file is the same version as the one you are using for editing.
    Steve

  • HT203176 i have a slow macbook, i ran live disk utilities and said I need to repair disk from a cd. did that, I got volume repaired from the external disk. when I reboot from hdd, then run disk utility, I get the same error message i did b4 repair

    i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great!
    When I reboot from hdd, then run disk utility, I get the same error message i did b4 repair. I went thru two rounds of this.....
    Can anyone help? thanks

    Sorry guys, I don't see how to reply to you so I use reply to "me" basically.
    So the error I get is "volume header needs minor repair" and then you need to perform repair from the installation disk message.
    I did repair not verify from the disk twice. Every time ending in the "the volume had ha been successfully repaired". Then I reboot from the internal disk. Run disk utilities from it, do verify and get the same error message I got before repair. I hope this can shed some light fr you guys. Sorry I didn't include details in the original
    MEssage.

  • When Mac reboots to Install XP black Screen Flashing Dash (-) stuck.

    when Mac reboots to Install XP black Screen Flashing Dash and I think its the press any key screen but on a Mac its Just Flashing Dash .
    I press every button going and nothing happens.
    and my only option is to turn off the mac to boot back in OSX.
    MacBook trying to Install Windows XPSP3 disk.

    I too am having the same problem. I do not know about the host of this thread, but I have been using a brick and mortar version of XP SP2 stand alone so it is not bundled with a computer like Dell, HP, etc.
    I have run it before just fine but it was time to reformat the drive, 0'd everything out, reinstalled 10.5.2, upgraded everything, repaired permissions and them ran Boot Camp. Put in the XP disc and all I get is the flashing dash mark in the upper left hand corner. I actually have 2 legal versions of XP SP2 stand alone and the same result on both discs so it has to be something with the partioning? I also redid the partitioning at various sizes all with the same effect. No luck.
    Any new thoughts anyone?

  • Error message in my BB when i reboot

    Hai,
    i wanna asking question about my blackberry 8520 black, when i reboot my BB there is error message on the screen : Uncaught exception : indek 4 > = 4
    sometimes the number 4 can change into 5 or others number
    1.what that message mean ?
    2. what the damage that will caused bcause that error message ?
    3. How can i fixed it ?
    thanks

    I would suggest that you backup your device, wipe it (Options > Security > Wipe) and reload the operating system.
    Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
    See the link below, for the download and simple installation instructions.
    First locate your carrier and the OS file you wish to use.
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
    1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
    2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    When you are complete, use Desktop Manager to restore you previous data to the device.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should ido

    Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7

    Thanks for all of your help!  Big time!
    Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader..  Which is failing. 
    I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
    It will not go into  Internet Recovery, or any thing else.  I hear the sound .. then that is it.. I get nothing else..
    I have tried clearing the NVRAM which is Option + Command + P + R
    Still nothing..
    So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
    What else guys?  I am hitting th keys right..

  • Info disappeared when I rebooted my computer!

    I have just rebooted my computer and reinstalled all the programs I need, including iTunes. Of course I saved all of my music and my iTunes library file before I rebooted. Almost all the info I added about the music in my library is still there, but with an emphasis on "almost". I have the Swedish version of iTunes installed, so I don't know if I get the names of things correct so I can explain my problem, but I will try.
    When I right click a song in my library and choose "Show info" and then choose the "Alternative" tab there are some boxes you can check. There is one box that you can check if you don't want a song to be played when you play your library in mixed mode, so I have gone through all my songs and checked the songs that I want to be skipped when I play my library in mixed order. Anyone know what I'm talking about? Anyway, when I rebooted my computer this info disappeared. So I guess this info has to be stored somewhere else than in the iTunes library file. So does anyone know where it is stored so this doesn't happen to me again?
    I would really, really appreciate the help with this! Thanks!

    Maybe it is "Skip when shuffling" on the Options tab?
    I never use that feature, but I believe that is the English translation. It's an iTunes feature, so if it's not stored in the ITL file, I don't knw where it would be.
    I changed it on one song and looked at the XML entry for that song. Nothing changed...it must be in that ITL file that nobody but Apple knows what goes in it!

  • IMAC Powers Down by itself, When it reboots only the Spot Light visable

    Hi,
    Hope someone can help, we have two Imac 20' G5 2ghz with 1.5gb Ram. Both system are crashing with the same problem.
    The IMAC Powers Down by itself, and when it reboots only the Spot Light Field is viable, Only way to recover it is to rebuild OS. Sent the System back, and Both Logic board and Hardrive were replaced, and the day system crashed again did they same thing. We also have 2 Imac 20' G5 Isight Models working in the same envioroment and are not experiencing any problems with those systems. Any Ideas?

    Sounds to me like you may have bad power supply units. I know of several people who had Rev B machines that were covered by THIS repair program.
    Even though it says rev A machines are covered. It seems like some that were made early in the switch still used some of the components that were fingered out as not functioning properly. I would check your serial number.
    Either way, give AppleCare a call, you should still be covered. And if you had some things replaced, like you said, let them know its doing same thing. Its for this reason that I have a hunch you are getting those old MBs that were having issues. Its more than the Power supply I sispect. Since you cant run it normally when it does power up, seems to me you may have several issues going wrong at the same time.
    Hope you get it fixed.

Maybe you are looking for