When I recenlty updated Firefox, I lost my e-mail from Firefox. When I need to go to my e-mail, I have to pull it up from Internet Explorer. This is really a pain in the neck . How do I switch my Windows Live Hotmail back to Firefox

I do not know any other details.

There is nothing to which to reply. I simply want someone to tell me how to get my e-mail through firefox

Similar Messages

  • How can I restore my Windows Live Hotmail to its previous good performance?

    SAT P200-1FC
    All of a sudden I cannot reply to incoming emails or send attachments on my Windows Live Hotmail account. It works perfectly on my PC but not on this laptop. Have I pressed something in error? It will receive incoming emails, and I can send new emails but cannot continue a thread?

    Hi
    In my opinion its not a Toshiba notebook issue
    In your case I would recommend checking the configuration of your Hotmail account
    Maybe you have to change something I recommend checking the Hotmail user support page.

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • HT4995 My location is sometimes wrong it says I'm in the middle of the ocean 80 miles away. This even happens when I'm connected to my wifi. This has become a really big pain in the ***.

    My location is sometimes wrong it says I'm in the middle of the ocean 80 miles away. This even happens when I'm connected to my wifi. This has become a really big pain in the ***. I've tried resetting and all that jazz but still I can't find a solution.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • HT3678 everytime I open qt pro i have to enter the registration code. This is really annoying. Does anyone know how to rectify this problem?

    everytime I open qt pro i have to enter the registration code. This is really annoying. Does anyone know how to rectify this problem?

    This procedure will check for files in your home folder that are locked or have a wrong owner. It makes no changes and will not, in itself, solve your problem.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    find . -flags +uchg,uappnd -o ! -user $UID
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.
    If any personal information appears in the output, edit before posting, but don’t remove the context.

  • I'm running OSX 10.9.2, when my system updated it required my Apple ID... When I provided it, it said that AppleID hadn't been used at the App Store... so now I'm locked out of my system... what do I do??

    Suggestions Re: I'm running OSX 10.9.2, when my system updated it required my Apple ID... When I provided it, it said that AppleID hadn't been used at the App Store... so now I'm locked out of my system... what do I do??

    First, there are no PPC Macs that can run Snow Leopard or later. Did you buy your iMac used? Where did you get Mavericks in the first place? If it was installed by the seller, then you are not licesnsed to use his/her copy.
    Do you know exactly what iMac model you have? If it's a post 2010 model you can do the following:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer. You may then go to the App Store to download Mavericks using your Apple ID.
    If you have a 2010 model you may require a special firmware upgrade before you can do the above: Computers that can be upgraded to use OS X Internet Recovery.
    If you have an earlier iMac then you must get Snow Leopard 10.6.8 installed by installing a version of Snow Leopard either included on the software restore discs or:
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.

  • When i have a music track with muted video above I get a regular beep in the audio,how do I stop it?

    when i have a music track with muted video above I get a regular beep in the audio,how do I stop it?

    The audio requires rendering.
    Audio for FCE should be aiff format @48 kHz.
    FCE can also use 32 kHz if the audio from a camera is 12 bit.
    Al

  • New update are listed on the app icon. When I click update all I'm prompted to enter password. When I do, the progress bars go away and nothing gets updated. Tried logging out, reset iPad, and nothing seems to work. Keeps asking me to enter password.

    New update are listed on the app icon. When I click update all I'm prompted to enter password. When I do, the progress bars go away and nothing gets updated. Tried logging out, reset iPad, and nothing seems to work. Keeps asking me to enter password.

    I've been having the same problem for days and just solved it. Tried going to Apple ID and had all the same problems you did in the second paragraph. I signed out with my current username on the ipad under settings--->store and signed back in with my oldest apple id and password. Now the apps don't ask for a password to upgrade. I too had a username that wasn't an email address and had to change to one that was at some point. That's what caused the problems. Hope this can work for you.

  • Not really a problem with Firefox per se; just wondering how I set Windows Live Hotmail as my default mail client.

    I am switching from ymail to hotmail as my mail client. I am having a VERY difficult time switching my default mail client to Windows Live Hotmail from Yahoo Mail. Please help!!!!! I have followed all the directions for IE8 but of course they don't work with Firefox. Could you send me in the right direction? Thank you so very much for your prompt attention to this matter.

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • HT1338 When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

    When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

    There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
    Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
    ~/Library/Preferences/com.apple.SoftwareUpdate.plist
    Note that if you are trying to download iTunes 10.7, that can be found here:
    http://support.apple.com/kb/DL1576
    Also, note that there is no reason to be anxious to get it, as the only thing added in iTunes 10.7 is compatibility with iOS 6, which will not be available until the 19th, and the new iPhone, which will not be available until later as well. The new iTunes that was announced is iTunes 11, which is also not yet available.

  • I have a problem with itunes opening.  I have downloaded the new version and it ask to repair or remove itunes I chose to repair.  This has not solved the problem.  If I remove the program how do I get my songs and playlist back?

    If I remove itunes from the computer, how do I get my songs and playlist back?

    Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

  • How can I talk to a live person at mozilla/firefox?

    When I updated to version 10, it locked up my computer. Nothing works unless I uninstall Mozilla. I reinstalled Mozilla twice with same results. Internet explorer works fine!

    By locked up does the computer not move too or just firefox? Also live chat is unavailable at the moment and there is no phone support but all our contributors will be able to help you.

  • I want to order a second copy of an iPhoto book. Thought created in the smaller format only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

    I want to order a second copy of an existing iPhoto book. Though created in the smaller format now only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

    To change a book size duplicate it (select the book in the source pane and press command and D) since text flow and picture  placements can change due to the size differences - then click on change themes, select the same theme and the new size
    check it carefully
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • HT1343 how do I switch between windows in the same programme?  I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

    how do I switch between windows in the same programme?  I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.  For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
    Please help!

    Command and ~ keys to tab between open windows.
    Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key.  Tilda ~ is shifted, and Grave Accent ` is not.
    Command-Grave Accent

Maybe you are looking for