When I refresh a page, a popup comes asking my confirmation because firefox will need repeat an action, so is there any way I can disable this?
Every time I refresh a page, a popup:
"To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."
...appears.
Is there any way I can disable this popup?
Thanks for the help :)
Thanks for the help everyone but I have tried safe mode, disabling addons, etc, it does not fix the problem..
Is there any way to disable this popup in the about:config?
Similar Messages
-
i have a late 2011 macbook pro i want to reinstall os lion 10.7 so when i reboot hold down options key click on recovery hd then in the os x utilities screen it says reinstall mac os x is there any way i can save this download so i can burn to dvd
steve359 wrote:
Sorry ... I read but was unfortunately distracted from your original post. You have a system that came with Lion. The Lion that is on your system is only for your computer and cannot be downloaded from the app store again because you never purchased it officially through the App Store.
Try this for making an external USB/DVD copy of Recovery on an external disk. internet is still required for reinstall, though, I believe: http://support.apple.com/kb/HT4848. But at least you have a separate Recovery Partition if you ever need a fully new and empty internal disk.
Your assumption is incorrect. Although he may not be able to download it from the App store he can download it directly for the Apple servers using the recovery partition on his original drive.
All you have to do is start the install routine and then point the install to an external hard drive. Once the download is finished the computer will reboot to start the install. At that reboot disconnect the external drive so the install can not start. Boot the computer back into the OS on the internal hard drive, which is what will happen automatically once the external drive is disconnected. Then connect the external and copy the files from it that were downloaded. Right click on that downloaded package file and select Show contents. In the contents of that package is a file called InstallESD.DMG. Copy that file out of the package and burn it down to a DVD or USB thumb drive and you now have the Full Lion Installer. I have several of them laying around on different hard drives and 2 USB thumb drives which I have used to reinstall Lion on my 15" MBP.
Sorry OP I should of just typed this out in my first post. -
I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?
The message means just what it says. Remove the damaged copy and try downloading it again.
Edit: Looking at FontLab's page, there's two issues going on.
1) It's a PowerPC app and will not run on any version of OS X newer than Snow Leopard, 10.6.x.
2) The "workaround" they offer is to purchase the Windows version and then run it in the the open source Wine, Windows emulator. -
I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?
Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
Always visit the scanner vendor's site and download - install the latest greatest software.
n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
As well the Acrobat 9.x product family is not compatible with contemporary OSs.
Be well... -
We Have managed to lose the insert page that came with our dvd and digital copy. Is there a way i can still download the digital copy without the redemption code?
Please please help me, if you know how.
-
I accidentally deleted a contact but stupidly i haven't ever done a backup. When i search my i phone, text messages that i received from this deleted contact still appear but they aren't in my message inbox. Is there anyway i can retrieve this contact??
Thank you!!!With no backup? No. Are you not syncing your contacts either over-the-air or with a supported application on your computer?
-
This is an example of my problem. This icon is the sole object in this document, and is the only thing being exported here. Yet when I do export it, a random bar of white space is exported along with it. I am currently using Illustrator to design the art for a video game, meaning that this empty space plays havoc with my end product, and I have to meticulously crop anything I export. Since I do have to make hundreds of individual sprites for this, I would love to learn how to fix this problem and save myself a lot of time. So, what exactly am I doing wrong here, and how can I fix it?
quicklite,
I believe the resulting/final size may extend just a tiny bit above a whole point/pixel (value) on the pixel grid.
You may see by Edit>Preferences>General>Use Preview Bounds (if needed), then select one of the top Reference Points in the Transform palette and look at the Y value measured in points/pixels.
If that is the case, the solution would be to get rid of that tiny bit. -
I deleted a bunch of songs by sliding over the song, and simply deleting it. When I plugged it into my sisters laptop, the music is still present and ghostly/grey looking. I can't slide over it and delete it. It's taking up too much space on my iPhone!!! How can I delete these!?
(the computer used to sync music from my iPhone and such isn't working, so I do everything not from a laptop)It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it. -
When I open a PDF document, it closes in about 10 seconds. Is there any way I can stop this?
I am unable to work on PDF files because when I open them they automatically close after about 10 seconds. I have Adobe 10
Moved to Acrobat Installation & Update Issues
-
my friend found an iPhone 5 ; he plugged it in the computer willing to restore when the restore was succesfull he was ready to set it up on his way to do it , icloud ask him for a password from certain email he doesnt know, is there any way you could skip this step or delete the accoun without putting a password down ?
9EriickxD wrote:
my friend did but they couldnt tell whose it was. now he/she just trying to restore it. But not knowing how to get rid off it
Turn it into the police.
Your friend should not keep someone elses iphone without making every attempt to fget it to the rightful owner. -
when i send an iMessage, it comes up as my email address. is there any way i can get it to come up as my name?
Make sure the receipient(s) have you in their Contact app with that email address and your name.
-
hi, i had recently formatted my iphone with no itunes backup. i restored my data with icloud but all the pics didn'y come back. now when i tried to restore again, icloud deleted all my pics from the server too!! is there any way i can get them back??
Back from where?
You choose to not copy them off to a computer as they are designed to be.
If they are no longer showing in iCloud, they are gone. -
I don't understand apple computer. I am writing a formal piece for english and one page of it gets deleted without me knowing. I save this file. Is there any way I can get it back?
Are you running Mountain Lion (Mac OSX 10.8.x)? If so, and you are using Pages, you should be aware that Apple has implemented a new auto-save feature for its software (and other software that has been written to comply). The very good news is that you can retrieve prior states of your document. The bad news is that the feature makes it easy to modify your work inadvertently by saving your changes without your knowledge. I don't think Apple has it quite right yet. In any event, research OS 10.8 auto-save and see if this might be your problem.
-
The Question says it all really.
Is there any way i can log onto Game Center via just my Username as i have forgotten the other details (I made the account when i was 11 - I'm now 14 and have a bad memory)?
I remember my Username on Gamcenter but due to the recent update of iOS7, it is only letting me Sign in through my APPLE ID - which i have forgotten over time. I wish to recover my account recently because I remember purchasing Gems on the game 'Clash of Clans' and I wish I could restart playing the game.
Many thanks for taking your time to read and answer this question.
-Gavin Chong.Hey xChongy!
I have an article here that can help you find that forgotten Apple ID:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
When iOS 6.0 updating my iPhone and connecting my iPhone to iTunes the only option I have, is to restore my iPhone. But ufortunately, I did not back up my iPhone before the updating. Is there any way I can avoid the restoring process?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766
Maybe you are looking for
-
How to make Group Matrix Report in BI Publisher Template Builder for Word
Dear All I have created a template in MSWord's BI Publisher for creating Matrix report, it is working fine, but i couldn't do it for Group matrix report. Kindly give me any kind of example regarding group matrix or nested group in column level and ro
-
The wireless adapter cannot be detected.
I think there is something wrong with my laptop, but this appears to be a little confused. I buy my laptop about 1 month ago, it is Acer V17 Nitro - Black Eidtion. But two weeks ago the wireless adapter is not working (it disappeared from the adapter
-
MRIS- invoice plan settlement error
I have created invoice plan using the standard SAP supplied periodic invoicing plan. When I go to tx MRIS and enter Co code, plant, vendor, purch doc and then in document selection 3( I have tried 1, 2 and 3) but I get an error " no document selecte
-
Upgrade production order after modification BOM
Dear Gurus, we need upgrade the quantity requirement in the production order after the modification the quantity in the Bom ? Is possible read newly the Bom whit the one operation confirmed ? The component modificated don't allocated a this operation
-
ENET/100 GPIB0 not displayed in MAX device list
I configured the GPIB0 device as an ENET/100 through the win2k control panel. The unit is on our subnet and passes the diagnostic. However, it does not appear in the Max device list. When I try to add a device manually, ENET/100 is not in the list.