When I restart my computer, firefox erases all my preferences.

I got a new computer and set up all my preferences yesterday. Today when I turned on my computer, they were all erased. Why?

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_02 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
You can also update to the latest Firefox 3.6.10 version.<br />
See "Help > Check for Updates"

Similar Messages

After automatically updating when I turned on the computer, Firefox erased all my History from the end of September until the update yesterday; how can I get back all the searches in my Show All History?

When I opened Firefox and it automatically updated yesterday, all my search history from then back to the end of September was wiped clean from the "Show All History." I very much need that search history, which is essential for my research. I didn't bookmark it because I knew it would always be there. But it's not. Please help.

Firefox tarballs from Mozilla Org use prefs within Firefox for updates. The "toggle" for not automatically updating - '''app.update.enabled''' and where to look for updates - '''app.update.url'''. The first needs to be '''''false''''' and the second could be a '''''null''''' string, do an update can't be found.
''I use both prefs to keep Firefox from updating by itself. I install each new version of Firefox as it is released, and keep the older versions around for reference purposes. Those prefs are the same since Firefox 1.5 came out.''
The versions of Firefox that are part of an operating system installation usually are that OS's own build of Firefox, and don't use the same update setup as Mozilla uses, in most cases. I am not familiar with Cent OS, but Ubuntu and Debian look for Firefox updates and from their own program repository servers outside of Firefox - as with the tarballs from Mozilla.

I am sharing a apple id acount with my family but when i synced my phone to the computer it erased all of my imformation and put the other phone's imformation on it. I was wondering how I can prevent this from happening?

I am sharing a apple id acount with my family but when I synced my iphone to the computer it erased all of my imformation and put the other phone's imformation on it. I was wondering how I can prevent this from happening?

If the ringtones are on the old device just plug it in and do a transfer of purchases then they will be on the computer to sync to the new device.

How do I disable Firefox from starting automatically when I restart my computer

When I restart my computer (MacBook Pro) Firefox (18.0.2) automatically starts up.

See:
* https://support.mozilla.org/kb/Firefox+launches+automatically+when+your+computer+starts

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

I download and install Firefox 4, but when I restart my computer, it reverts to v. 3.5 something. How do I make the new version stick?

Firefox kept trying to update v. 3.5.?.?, usually failing. So, I went to the website, then downloaded and installed v. 4. But, when I restart my computer, it reverts back to the old version, loses bookmarks added while using v. 4, and again tries to update v. 3.5. When I look in the folder which contains Firefox, "properties" says I have v. 4, even though what is appearing is not.

See:
* http://kb.mozillazine.org/Preferences_not_saved

Flash quits working when I restart my computer and I have to uninstall and reinstall every time

HELP! I've been working on this for 11 hours non-stop!
I have Windows 7 64bit. I'm using the newest Firefox browser. I install Flash and it seems to sort of work. It is in my Control Panel Uninstall programs with the Flash icon.
When I restart my computer and go to the Adobe site it shows that Flash isn't working. It's still in the Control Panel Uninstall programs BUT it has no icon. So I have to uninstall it and reinstall it to use it.
When I go to any Zynga.com games and right click on the game window the Flash window opens but when I click on Settings it freezes and I have too right click and left click a lot for it to go away. So I can't allow the site to use 100% of Flash to run on the site. Once in a while if I wait a few minutes Settings will open and I set it to 100% but when I go back and look at it later it says I am using 0%.
I have Norton 360 and have turned it off and uninstalled and reinstalled repeatedly only to have the same problem occur.
Before I installed Windows 7 and had Vista Ultimate it worked better but still not as good as it should have.
Also in my Firefox plugins Shockwave is there but no Flash plugin is ever there with Flash installed or uninstalled. Should Flash be there and where did Shockwave come from? Firefox?
Do I need Shockwave for Zynga or Facebook games? Or at all for that matter. I'll install it for no good reason as long as it doesn't screw something up.
After 11 hours of this Adobe HELL I am burnt! So ANY help is greatly appreciated!
Thanks to anyone who can help me. THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Replied in your other post.

I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue?

After updating with iTunes 12.1 for Windows 8.1, when I restarted my computer, my headphones no longer work. According to my computer they do. Is this an iTunes issue? I did the audio troubleshooting and it says everything is fine. I have a Toshiba Satellite L75D-A7280.

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

When I restart my computer, preferences are reset?

When I restart my computer after updates/etc., my dock is reset to include default apps, while removing custom folders/apps or "forgetting" (shown as "?") the location of certain apps. This happens regardless of whether I accept or deny a keychain-looking request on boot, pre-login that asks for admin confirmation to "modify" settings or so. This is annoying because i have to drag all unwanted apps off of the dock. It also resets all the desktop size/grid/alignment settings.
My harddrive was replaced by a certified Apple Technician and is now a solid state drive. The computer finds the startup disk "f", which shows up under the harddrive in disk utility. OSX.8.1, 4GB RAM, these updates on a mid-2009 13" Macbook.
Side note,
Microsoft Word also seems to be negatively affected by OSX.8. Autosave doesn't appear to work? It consistantIy tells me that autosave or autorecovery have failed. I have the latest MS Office and have google to try and solve--some files are suddenly "read only", and older .doc files cannot be opened. I have old reference data and passwords in some of these files! Losing them is not ok.

I tried the disk verify/repair, but the same problems persist. Also ran all available udpates.
The warning dialogue/password prompt at boot asks to "modify network configuration". It seems unnecessary for it to always come up? Probably not related to the desktop/dock issues but confusing too.

I am unable to open Safari. It was working yesterday before I installed the update. The update seemed to be automtic when I restarted my computer. I am running 10.9.5. I don't want to lose my contacts, bookmarks etc if I have to delate the app.

I am unable to open Safari. It was working yesterday before I installed the update. The update seemed to be automatic when I restarted my computer. I am running 10.9.5. I don't want to lose my contacts, bookmarks etc if I have to delete the app. Any suggestions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Stickies in dashboard revert to yellow when I restart my computer.

When I select a different color for the stickies on the dashboard, the color changes. When I restart my computer, however, all of the stickies have reverted to the original yellow color, but when I check in the i the color I selected prior to the restart is still checked. Any fixes for this?

No, you don't have a virus or other malware. Even though you don't say, I'm sure you are running Lion or Mountain Lion. This feature is known as resume. If you close all documents before quitting Numbers or Pages, you won't have them reopening when you launch the app again. If you don't want to have to close everything first try Mountain Tweaks. The option to turn off resume is at the bottom of the left-hand column under Lion. You can quickly close all open windows in an application by typing ⌘ ⌥ W (Command + Option + W) or hold down the Option/alt key while clicking the red close button. In Mountain Lion you can check a box in System Preferences > General to close all documents when quitting an application.

My iPhoto keeps opening when I restart my computer

My iphoto keeps opening up when I restart my computer. Is there anyway for me to turn this off?

Sure
Do you have any FAT strorage devices attached to it? Is so unmount them or in the iPhoto preferences set actipon when a camera is connected to do nothing
Do you have iPhpoto set to launch on start up? Is so right click on the iPhoto icon in the Dock and under options uncheck that option
Do you have iPhoto in your list of programs to launch at login in the users and groups system preferences? If so then remove it
Was iPhoto running when you shut down and do you have the option checked to restart all programs ? If so quit iPhoto before shutting down or uncheck that option
LN

My macbook air wont change songs when for itunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minute then stop working again. Did i change a settting? what should i do?

My macbook air wont change songs for iTunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minutes then stop working again. Did i change a setting? what should i do?

Hello King Cutway
If you are having issues with the functions keys, then check the settings in System Preferences > Keyboard and look to see if Use all F1, F2, etc. keys as standard function keys is unchecked so you can use it properly.
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/HT1296
Regards,
-Norm G.

How do you set up iphone 5? everytime i put it into the computer it erases all my contacts how do i stop this and get my contacts back?

how do you set up a iphone 5 everytime i conect it to the computer it erases all my contacts how do i put them back on my phone and stop the computer erasing them again?

Are your contacts not on your computer?

When I restart my computer, firefox erases all my preferences.

Similar Messages

Maybe you are looking for