When i restart my iphone then only it charges . Otherwise Its not charging . What do i do ???
I am connecting the charger its not working. When i restart it charges and when again i need to charge i have to restart.. Whats the problem ?i dont understand...
How long do you allow the device to sit charging before trying to turn on?
Well just like ALL Companies sometimes things happen, if it is not that old then simply take advantage of the 1YR Hardware Warranty that comes with Newly purchased iOS devices.
Either call AppleCare or go to a Apple Retail Store.
Similar Messages
-
I (stupidly) have two Apple IDs and when I got an Iphone 6, only the apps from one Apple ID are on the phone. How do I get my other apps (from my old Iphone 4) on my new Iphone? Thanks
You can use the same appleid that you purchased the apps with on the phone for the App store. Settings> iTunes & App Store and continue to use the other id for everything else allowing you to have access to your previously purchased apps. You can then either sync or download the apps without paying for them again.
It can be quite handy having two appleids - it can be quite useful if you can manage them correctly. One id for the store and one for imessage is good for privacy if you have the same id in use on another device. -
When I updated by iphone with IOS7, my calendar entries did not follow the icloud. I am only showing pre set calendar entries for the year and lost all other calendar entrie and it will not take any new entries. They show up in my outlook, but not on my iphone, which they did before I updated my software to the new i0s7
Before syncing, select each calendar on your Mac and back it up by going to File>Export>Export. If anything goes missing, you can use these to restore your calendars.
Have you tried simply force closing the calendar app on your iPhone? To do this, double-tap the home button, locate the calendar app, then swipe up on the image above the app icloud to close it and tap the home bottom. Then test your calendar again. -
i recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?
Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US
-
iPad not responsive. Even hold both the restart and Home buttons for 20 seconds.
Originally I can see the iPad symbol on the screen. Trying using iTune to restore it, then only the charging symbol is shown. iTunes can not even recognize the iPad anymore.What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at the same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. I tried restarting the mac then only the VGA-adapter worked. I also tried to reinstall the OS.
I'm using new 13-inch MacBook Air early 2015. OS X 10.10.3.Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
Thanks again for your post. Cheers from Bonnie Scotland. -
HT201210 when i update my iphone then there is 1015 error
hello i have aaple 3g 8 gb mobile......when i restore this then these download tha software and but not install software..then come when i update my iphone then there is 1015 error these error
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
My phone keeps saying the storage is full so I deleted pictures, apps, and all my texts. Then after I do this my phone freezes and I have to restart it. When I restart my phone then everything I deleted comes back. What is going on?
HI Shelby,
It sounds like your available free space is not reporting properly. I would start by quitting the Settings app:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes, then restore it as new and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling -
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
My iphone 3G only gets wifi if its within 1 ft of the router. I have had the antenna replaced but its no better. I have restored to factory through iTunes but still not working. 3G signal is good
Try these steps. Check to see if your router has a firmware update. Go to the manufacturers website and check. If so, install. If not, reset the router. Disconnect from power for 30 seconds, plug it back in. Wait for it to boot up and then check your wifi.
Do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check wifi.
If none of this helps, then make an appointment at the Apple store to have the hardware checked. If it is found to have a hardware defect, they will more than likely replace the device. Remember the final call is Apple's. -
When I disconnect my iPhone 4s from the charger, it gives me the dial pad with a emergency call option... help please?
Hello there, curtq.
Great job troubleshooting your issue so far. The following Knowledge Base article offer some great practical steps for troubleshooting Wi-Fi issues with your iOS device:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
If following the initial troubleshooting steps recommended at the beginning of the article, you may want to then proceed to:
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i was try to upgrade my iphone 3gs via iTunes but it is not activate.what are the process to upgrade ? now it is showing black screen to select country then finally write unable to activate.
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!
Just go into settings>Icloud> then sign in there.
-
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?
TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.
Maybe you are looking for
-
ADF Master Table, Inline Detail Table - How to Scroll Range/Disclose Row
JDev 10.1.3.2 ADF/BC I really need some help here. I've tried as many things as I could think of and I still cannot get this to work. Scenario: I have query/result page. User clicks a link in the result table to take him to another page. This page ha
-
Make Black and White PDF from Color JPGs
I don't have a scanner and use my digital camera to make 2-3 page document PDFs occasionally. I take a picture of a page, crop it in an image editor, and finally drag and drop the jpgs into Acrobat to create a pdf. The problem is that these docs do
-
PDF and PowerPoint 2007, strange slides and handouts
I'm getting strange output when I create a presentation in PowerPoint and print to Acrobat. The problems happen whether I print Slides or Handouts. -- On some slides, the slide title is partially or completely missing. -- In grayscale mode, some grap
-
Hi All, I am doing a bdc program inside RFC-FM.in which i need to do a posting in FI and return the document number via the export parameter of the RFC-FM.when the function module is tested in foreground its giving me the document number via the su
-
hi guru's we copied standard BSP application(HRRCF_PERS_DATA) into Zapplication.it's a E-recruting page for condidate persnoal data.we added three fields to zapplication.this three fields data which we enterd in webpage to update in 5102 infotype.i d