When I rotate an image in Preview and save it, it reverts back to original
This is a really frustrating problem! When I click on a picture in Finder, it comes up in Preview. If I rotate and save it, the rotation isn't saved and it ends up being the same as the original picture. How am I able to rotate and save the rotation?!
What application are you using to rotate the picture? Applications such as Preview and GraphicConverter save the rotated picture, but with others such as iPhoto you need to export the rotated image.
Similar Messages
-
Transform implementation goes wrong when I try transforming a image through script and save the new image using a HTML to canvas plugin. The rotation comes up fine, but the origin of the transformation is faulty (compared to other browsers like Chrome & IE)
A good place to ask advice about web development is at the mozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum. -
My 4s images are grainy and low res when I use google image search, imdb and a couple other apps. My photos roll pics are hi def just not images. What's up with this?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I recently had to disable and enable all add-ons on Firefox. Now when I google something, when I hover over the website preview and click 'cached' it won't highlight the key terms anymore. How can I fix this?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
When I customize the toolbar in Preview (OS 10.7) it reverts when I quit
When I customize the toolbar in Preview (OS 10.7) it reverts when I quit. How can I keep the tools I want on the bar? I use preview all the time and I am used to a certain set of tools being there
PeteWhat application are you using to rotate the picture? Applications such as Preview and GraphicConverter save the rotated picture, but with others such as iPhoto you need to export the rotated image.
-
Chart - PREVIEW and SAVE buttons disabled.
I am using BI Publisher Desktop with WORD 2007 on VISTA. When I attempt to add a chart to a rtf template, the PREVIEW and SAVE buttons are disabled. I can move data fields from the Data section into the Layout Section, select chart type, even the style. Everything appears to work just fine but I can not preview or save. The template file is not in any restricted folder. I can add a table, then save and preview the document just fine.
I have even openned some of the samples that came with the download and when I view the properties on an existing chart, I see the same disabled buttons.Which menu path are you using?
Are the items available for personalization? -
Inserting image to jFrame and save it in a sql database
Hai guys, I have a problem in inseting a image in jfame and save it in database (my sql)
does any one have an idea about this task reply me pls
thanks
bay !Use BLOB (Binary Large Object) to save your image to a database.
As far as displaying a image on Jframe, search the forum. -
My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.
Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
Good luck. -
hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advanceYes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well. -
I purchased a used macbook pro and want to set it back to original factory settings
I purchased a used macbook pro and want to set it back to original setting
What to do before selling or giving away your Mac
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I installed Lion and now my MS office will not work, is there a way to revert back my original software?
Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails. -
I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?
Welcome to iMovie Discussions.
See my 2nd reply to 'getzcreative', here. -
Losing links of images on Preview and Publish.
Some images are not linking on Preview and Publish (Beta7). I have relinked (even going back to the original in Photoshop) and re-published again, those link up but then other images stop linking and do not load. Ones that were working fine just minutes ago.
Hi COLBY,
Here is the link to a recently published site. On the Publish I did about 30 min. before all the images were loading. Now on this page two are not. When I wrote the question yesterday 6-7 images were missing, randomly. One than publish again three, than more. Since yesterday I went back to a earlier saved version and made some minor type changes and links, not involving any of these images. The first time I published today, all the images were linked. It seems the longer I work with the file the more images seem to disappear. I have only had this problem since I updated to the Beta 7, on Friday. http://amberart.businesscatalyst.com/cockroaches.html
Thanks.
Linda Nye -
Embedded Images Print Preview and Print Blacked Out - Adobe 9 Pro
Having an issue where images embedded into the file will view properly, but once you print or print preview the images are blacked out. This is regardless of the printer we use.
Is there a setting we are missing?Thanks for posing this question.
Although fonts have embedding restrictions baked into the font such as preview and print, the real restrictions are to be found in a font's EULA (End User License Agreement) which may have other restrictions including payment of royalties on copies of PDF files or any other asset in which the fonts are embedded.
In the case of any and all fonts sourced from Adobe, not only do you have at least preview and print embedding privileges, but there are no restrictions or royalties required for distribution of files (i.e., PDF, EPS, eBooks, etc.) in which the Adobe fonts are embedded.
In other words, you are “good to go” with Adobe fonts. On the other hand, make no assumption about fonts sourced from other font foundries. Many do not provide such liberal terms!
- Dov -
Why When I Rotate My Photo It Doesn't Save It?
I have a photo that is slightly uneven, so I rotate it 2 degrees to get it perfect, but when I save it and then open the image and look at it, it is back to being uneven like before. It is as if it doesn't actually save the rotation. Anyone know why and how to fix this? Thanks.
Ahh, thank you so much. That did the trick. I don't know what the other thing is for if it is not actually gonna save it when you click on save.
Maybe you are looking for
-
Can't shut down system preferences
After changing display settings while using VGA port to remote display laptop will not shutdown because System Preferance will not shut down. Shutdown grey-Ed.
-
My bridge is not working normally and keep given me this message : bridge encountered a problem and is unable to read the cache . Please try purging the central cache in cache preferences to correct the situation
-
my pad mini not finish the icloud copy. I have try meny times and 5-6 days every day. it writes last copy 16/10/2013. sorry for my english. Please help me
-
is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how? Will the status of the games be the same?
-
Can`t connect to Samsung NV 11 digital camera
Anybody has the same problem?