When I run my hardware diagnostics I'm getting failures - WDC-WD64-00AAKS-65A7B2 SATA DISK DEVICE.
When I run my hardware diagnostics I'm getting failures - WDC-WD64-00AAKS-65A7B2 SATA DISK DEVICE,
HD535-5W, HD535-3W, HD535-2W.
Thanks!!!
That means exactly what it's telling you, the hard drive has failed or is about to fail and needs replacement.
If the system still runs backup your data and create Recovery DVDs ASAP if you haven't already done so.
Similar Messages
-
When i run report through OC4J Application i get a exception message
When i run report through OC4J Application i get a exception message saying Server returning invalid xml and the exception number is JBO -29000. The Reports Server is installed on machine having IP 10.191.99.254.
Below is the exception message:
(oracle.jbo.JboException) JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: java.io.IOException, msg=Server returned HTTP response code: 500 for URL: http://10.191.99.254:8888/reports/rwservlet/showjobidnull
Anybody Please help me out with this issue.....because I am really fed up with this problem....want some urgent help.....
One possible workaround which I could make out is there needs change to be made in the .rdf files in Report Builder and then inside the User Parameters we change the Initial Value to * from % because the Reports Server encodes every value as %Initial_Value% and hence if the initial value for the parameter is % then it does not get a valid value and hence it returns as an invalid xml
But unfortunately it seems this workaround does not work.Please help as soon as possible.Hi,
you said that some changes were made in the .xml files but i had said that all the files present in Reports Developer or Reports Builder are .rdf files and I had made changes in the .rdf files for this articular report and then compiled it thereitself and then ran a paper layout of the report but the report did not comprise any data.
There was sufficient data also to populate the report. So this may not be a database issue. Please help if you can ASAP. -
When I run ical on my mac I get the error:
The server responded with an error.
The request for account “Yahoo!” failed.
The server responded with
“504”
to operation CalDAVAccountRefreshQueueableOperation.
I hit "go online" and almost immediately I get the same message again. Any ideas?I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed. -
When I run repair permissions I continue to get this message even after a full reformat and re-install of OS. "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
Doug,
According to Apple, Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore. -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I wish to convert my Matlab files into .dll's so that I can use them in LabVIEW. I am using 'mcc' and 'mbuild' of Matlab to convert my .m files into .c and .dll.
When I try to run the .dll's in LabVIEW, I get an error message in a modal window stating some required .dll or procedure is not found.
How should I resolve this issue. Should I add any other Matlab .dll's in course of making my .dll?
Please help in solving this issue... Thankyou very much.KJV wrote in message news:<[email protected]>...
> When I run the matlab generated dll, it is stating 'matllb.dll not
> found'. Is it that I should set the path for matlab\bin to include
> all the dll's before I compile? When I make dll from C, it works fine
> in LabVIEW. The problem is from .m to .dll. The problem also arises
> when I convert my .m to .exe. The same error of 'matllb.dll not
> found' comes over. Should I change my matlab compiler options or
> something else? Please help me?
I have the same question,I don't know how to use the matlab DLL file in labview,
I hope someone can descripe the procedure in detail. -
I can't seem to run a hardware diagnostics on my MacBook Pro.
I recently had an issue with the Wi-Fi hardware on my MacBook. I wasn't able to view any local networks. Instead, the menu option stated that there was an issue with my wireless hardware. I resterted my MacBook and the issue persisted. My computer also went to sleep and I wasn't able to wake it up. Since then, everything is back to normal and functioning properly. I searched some articles on the support site on how to run the diagnostics at startup, but holding down the D key doesn't do anything. I'm currently running the latest version of Mavericks (10.9) and I have a 15-inch, mid 2010 MacBook Pro. Is there something missing that's causing me not to have the on-board diagnostics available to me? Is there even a way to check for something liek that? Any advice is greatly appreciated in advance.
ChrisJ1927,
with Mid 2010 MacBook Pros, you’ll need to use the Apple Hardware Test that came on the model-specific grey installation DVDs that originally came in the box. The diagnostic tools on the Recovery Partition aren’t usable on MacBook Pros that were originally equipped with Snow Leopard or before. -
When I run my query (below) I only get 100 rows returned.
I am a little rusty with SQL so I think that I must be doing something simple wrong. Here is the query:
SELECT Tagname, Value, DateTime
FROM Insql.Runtime.dbo.AnalogHistory
WHERE "DateTime" > 'February 26 2014 10:30'
AND "DateTime" < 'February 26 2014 10:50'
AND Tagname = 'T0201001'
This is a wonderware plant historical database that collects analog data every 5 seconds.
No matter the time frame, 5 minutes or 5 hours I get back 100 rows of evenly time spaced data.
I went into the query options and edited them to no avail. I am sure that I could calculate how mainy rows I think that I should have and select that number but I assumed the given the date range it would figure that out by itself.I got the same result running:
SELECT Tagname, Value, [DateTime]
FROM Insql.Runtime.dbo.AnalogHistory
WHERE [DateTime] > 'February 26 2014 10:30'
AND [DateTime] < 'February 26 2014 12:50'
AND Tagname = 'T0201001'I am running my query from Microsoft SQL Server Management Studio 10.0.2531.0.I have been running this DB since 2000 (obviously in older versions of SQL).The DB was developed out of corporate and we just add tags through the WonderWare InSQL Historianwe can access the data through several trending applications. I was just teying to directly access the datato do some analsys with the raw data. I did check the Query options in Microsoft SQL Server Management Studioand it didn't appear to help. I was assuming that there was some default limitation but could not locate a setting anywhere. -
I am running Windows XP Servicepack 3. I clicked the Free Download, saved it using IE8, and then tried to run it. A couple of seconds after I pressed ENTER on the filename, I got that infamous Windows XP "thud" sound along with the message that the file is corrupt.
Hi knobman- I'm not sure why the file would be corrupt. I would recommend downloading from the official Mozilla site only. You can click this link to get the latest and best version [just select 'Windows' and it should go]:
http://www.mozilla.org/en-US/firefox/new/
Hope that helps! -
Gee...I didn't know I was going to get a whole box to describe the problem. We took it apart, checked memory, it's ok. When I pried open the dvd and started from the install disc to run the hardware diagnostics, I pressed d. It didn't give me a choice about hard discs to start from, I have a snow leopard bootable disc ad a lion bootable disc. It didn't even see them.
I have work to do! Freakin.
So, it chimes, shows the apple with the pattern all over the screen and it spins, and then you see a progress bar. it doesn't go any further.Take the card out and boot the machine.
The hit one of the volume up/down keys on keyboad. If you here the usual sound, it booted.
With any luck you have Screen Sharing enabled and can remotely log in.
But reaching desktop with the card out is pretty much proof that card is gone.
8800GT is black with 2 silver arrow shapes.
You can try removing heatsink (12 screws) and baking it. (google)
You have exacty NOTHING to lose, so 50/50 odds are worth a shot. -
Where can I download Apple Hardware Diagnostics for MacBookPro2,1?
My MacBook Pro 17-inch Core 2 Duo (MacBookPro2,1)'s DVD drive appears to be faulty - It treats working DVD's as 'blank'.
I want to run Apple Hardware Diagnostics (AHD) on the machine but (a) I can't find the original DVD for the machine (b) in any event it won't work as the drive is faulty!
I know I can download older versions of AHD at http://www.info.apple.com/support/aht.html but where can I find one for my Mac?
I want to download it and 'restore' it to a hard disc partition so I can boot it from there.
Any ideas anyone?Every Mac model has its own components different than any other, and the Apple Hardware Test is unique to each model. A handful of models share one AHT. A pile of them are available for download but are obscured behind a non-obvious naming convention. A partial list is here and here. Unfortunately Apple simply doesn't make it easy to figure out how to restore this.
What I've learned is that pretty much all intel Macs before 10.7 did have AHT preloaded on the drive, found in hidden folder /System/Library/CoreServices/.dianostics. If you reformat the drive and reinstall, this is not reinstalled. And if you encrypt the drive with File Vault 2 it would be unavailable in any case. With 10.7 and newer hardware, the AHT is stuffed into an AHTxx.dmg file and found on the Recovery HD volume, also in a hidden directory. So it can still be used when FV2 encryption is enabled.
Since install disks are gone, I don't actually know how current Mac owners are supposed to get this restored, however also since that time, Apple has moved to firmware that can load the proper version of AHT via option-D on boot with a wired or wireless internet connection. It doesn't permanently download this to disk, the firmware downloads and runs it, and upon reboot it's gone again.
So the gist is, once you've lost the installed version of AHT, you either need the AHT disk that came with your computer or buy one from Apple or go to an Apple store and they'll run it for you. Or you have a newer Mac with firmware that can talk to Apple directly (pretty much anything 2010 and newer) over the internet. -
Hardware Diagnostics Test doesn't see my network
I have a mid-2010 Macbook Pro that I just purchased, refurbished. I need to run a hardware diagnostics test on it as I am getting kernel panics after installing Adobe Creative Cloud.
I have confirmed that I have the ability to run this test. I hit option D at startup as instructed but when I get to the screen to choose my network, Mac doesn't see it. I even tried a wired ethernet connection and it's not seeing it.
I'm sitting in the same spot in the house as always and I can access wireless just fine when I start up normally.
Can anyone help? Thanks!The AHT is almost completely useless, so you're not missing much. If you want to run it and you don't have the discs, you can order replacements from Apple customer service. You would do better to start a new thread describing the actual problem you have, rather than what you think is causing it or how you think it should be solved.
-
Getting error 404 when iam running a simple login servlet in tomcat
hi
this is my Login.java
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Login extends HttpServlet
public void doPost(HttpServletRequest rq, HttpServletResponse rs)
String username =rq.getParameter("username");
String password =rq.getParameter("password");
try{
rs.setContentType("text/html");
PrintWriter out=rs.getWriter();
out.println("<html><body>");
out.println("thank u, " + username + "you r logged sucessfully");
out.println("</body></html>");
out.close();
}catch(Exception e){
e.printStackTrace();
i have saved in the form ofC:\Program Files\apache-tomcat-4.1\webapps\sravan\WEB-INF\classes\Login.class
where sravan is my folder
step 2: Login.html
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>login page</title></head>
<body>
<h1> WELCOME TO THE SERVLET HOME PAGE</h1>
ENTER UR USERNAME AND PASSWORD
<form action="/sravan/Login" method="Post">
username<input type="text" name="username" >
password<input type="password" name="password" >
<input type="submit" value="submit"></form>
</body>
</html>
i have saved in the form C:\Program Files\apache-tomcat-4.1\webapps\sravan\Login.html
step3:
my web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>beginning j2ee</display-name>
<servlet>
<servlet-name>Login</servlet-name>
<servlet-class>Login</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Login</servlet-name>
<url-pattern>Login</url-pattern>
</servlet-mapping>
</web-app>
i have saved in C:\Program Files\apache-tomcat-4.1\webapps\sravan\WEB-INF\web.xml
step4:
here is my server.xml
<Context path="/sravan" docBase="sravan" debug="0" reloadable="true" privileged="true"/>
saved in C:\Program Files\apache-tomcat-4.1\webapps\sravan\WEB-INF\server.xml
everything is fine....program is compiled ...but when iam running the servlet in tomcat iam getting error 404 Login.html not found....
so plz kindly help me this my first servlet .....There seems not to be any '.html' in your url-pattern
<url-pattern>Login</url-pattern>- so i presume you should use
http://yourhost/Logininstead. -
When I run any given demo files I get the following error.
Exception in thread "main" java.lang.NoClassDefFoundError: msgsendsample
These are the commands I run in the command line.
set CLASSPATH=%CLASSPATH%;C:\Program Files\javamail-1.3.2\mail.jar
set CLASSPATH=%CLASSPATH%;C:\Program Files\javamail-1.3.2\jaf-1.0.2\activation.jar
javac msgsendsample.java
java msgsendsample <to> <from> <host> true
Exception in thread "main" java.lang.NoClassDefFoundError: msgsendsample
This program cmpliles properly but I get this error when I try to run it.
I have passed the commandline arguments correctly.
Pleas help me telling the correct way to run this.
Thanks.I have a large problem using the demo...
Java version "1.4.2"
javamail-1_3_2-src-jrl.zip
jaf-1_0_2-upd2.zip
java.lang.NoClassDefFoundError
at java.lang.Throwable.<init>(Throwable.java:180)
at java.lang.LinkageError.<init>(LinkageError.java:26)
at java.lang.NoClassDefFoundError.<init>(NoClassDefFoundError.java:30)
at java.lang.ClassLoader.defineClass(ClassLoader.java:568)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:168)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:312)
at java.net.URLClassLoader.access$300(URLClassLoader.java:85)
at java.net.URLClassLoader$ClassFinder.run(URLClassLoader.java:636)
at java.net.URLClassLoader.findClass(URLClassLoader.java:221)
at java.lang.ClassLoader.loadClass(ClassLoader.java:320)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:266)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:333)
Does this mean I do not know what I'm doing here! :> -
I have an app called Astrogold that crashes when I run one function, but no one else I know with the same app experiences the crash. The app writes several different reports, and gives the option of sending them as PDF files. All the other reports generate fine, but one of them....and that one crashes the app while it is trying to generate the report.
Note: it only crashes the display. If I double click the home button I see the app itself is still running.
I checked my Diagnostics & Usage data, and noticed that every time the app crashes a LowMemory report is created. I looked at the LowMemory report and see that the Largest process is Astrogold. But I don't see any reports with the name of the app itself.
I have an iPhone 5c, and according to iTunes I have 2.25 GB Free.
Below is the actual LowMemory report. Can anyone make any suggestions?
name":"astrogold","bug_type":"109","os_version":"iPhone OS 7.1.2 (11D257)","bundleID":"com.esotech.astrogold","version":"4.2.4 (4.2)","app_name":"astrogold"}
Incident Identifier: 257B47E8-3A4D-4C64-8E9F-71D33C905548
CrashReporter Key: cfa389285f4559a21d797bfeec6a78c584e798d6
Hardware Model: iPhone5,4
Process: astrogold [18906]
Path: /var/mobile/Applications/D8301675-652C-4472-A168-CF3F141C5F58/astrogold.app/ast rogold
Identifier: com.esotech.astrogold
Version: 4.2.4 (4.2)
Code Type: ARM (Native)
Parent Process: launchd [1]
Date/Time: 2014-08-31 13:15:13.616 +0800
OS Version: iOS 7.1.2 (11D257)
Report Version: 104
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Triggered by Thread: 0
Thread 0 Crashed:
0 libsystem_kernel.dylib 0x399a51f0 0x39992000 + 78320
1 libsystem_pthread.dylib 0x39a0d7b2 0x39a0a000 + 14258
2 libsystem_c.dylib 0x39955ff4 0x3990c000 + 303092
3 libsystem_malloc.dylib 0x399ccd20 0x399ca000 + 11552
4 libobjc.A.dylib 0x393f73a4 0x393ed000 + 41892
5 libobjc.A.dylib 0x393ffb66 0x393ed000 + 76646
6 astrogold 0x001be574 0xe2000 + 902516
7 astrogold 0x001be774 0xe2000 + 903028
8 astrogold 0x001a2910 0xe2000 + 788752
9 astrogold 0x001a40fa 0xe2000 + 794874
10 UIKit 0x315ba174 0x3147c000 + 1302900
11 UIKit 0x315613d6 0x3147c000 + 938966
12 UIKit 0x31560c2c 0x3147c000 + 937004
13 UIKit 0x314872e0 0x3147c000 + 45792
14 QuartzCore 0x31103316 0x310f7000 + 49942
15 QuartzCore 0x310feb3a 0x310f7000 + 31546
16 QuartzCore 0x310fe9cc 0x310f7000 + 31180
17 QuartzCore 0x310fe3e0 0x310f7000 + 29664
18 QuartzCore 0x310fe1f2 0x310f7000 + 29170
19 QuartzCore 0x310f7f18 0x310f7000 + 3864
20 CoreFoundation 0x2ec20ff6 0x2eb81000 + 655350
21 CoreFoundation 0x2ec1e982 0x2eb81000 + 645506
22 CoreFoundation 0x2ec1ecce 0x2eb81000 + 646350
23 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
24 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
25 GraphicsServices 0x33af86ce 0x33aef000 + 38606
26 UIKit 0x314ea86c 0x3147c000 + 452716
27 astrogold 0x000e9136 0xe2000 + 28982
28 libdyld.dylib 0x398eeab4 0x398ed000 + 6836
Thread 1:
0 libsystem_kernel.dylib 0x39992804 0x39992000 + 2052
1 libdispatch.dylib 0x398e1050 0x398d9000 + 32848
2 libdispatch.dylib 0x398db2de 0x398d9000 + 8926
Thread 2:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
6 Foundation 0x2f57d492 0x2f572000 + 46226
7 Foundation 0x2f5ce254 0x2f572000 + 377428
8 astrogold 0x00408f30 0xe2000 + 3305264
9 Foundation 0x2f63fa0a 0x2f572000 + 842250
10 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
11 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
12 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 3 name: com.apple.NSURLConnectionLoader
Thread 3:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
6 Foundation 0x2f5ca23c 0x2f572000 + 361020
7 Foundation 0x2f63fa0a 0x2f572000 + 842250
8 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
9 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
10 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 4 name: com.apple.CFSocket.private
Thread 4:
0 libsystem_kernel.dylib 0x399a5434 0x39992000 + 78900
1 CoreFoundation 0x2ec244de 0x2eb81000 + 668894
2 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
3 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
4 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 5:
0 libsystem_kernel.dylib 0x399a5c70 0x39992000 + 81008
1 libsystem_pthread.dylib 0x39a0ac1e 0x39a0a000 + 3102
2 libsystem_pthread.dylib 0x39a0aad8 0x39a0a000 + 2776
Thread 6:
0 libsystem_platform.dylib 0x39a069a6 0x39a05000 + 6566
1 libobjc.A.dylib 0x393ffad6 0x393ed000 + 76502
2 CoreFoundation 0x2eb86140 0x2eb81000 + 20800
3 CoreFoundation 0x2eb8c0dc 0x2eb81000 + 45276
4 CoreFoundation 0x2eb9f6e4 0x2eb81000 + 124644
5 astrogold 0x0019ed06 0xe2000 + 773382
6 Foundation 0x2f59a64c 0x2f572000 + 165452
7 Foundation 0x2f58a870 0x2f572000 + 100464
8 Foundation 0x2f62e740 0x2f572000 + 771904
9 libdispatch.dylib 0x398de25a 0x398d9000 + 21082
10 libdispatch.dylib 0x398df684 0x398d9000 + 26244
11 libdispatch.dylib 0x398df8d8 0x398d9000 + 26840
12 libsystem_pthread.dylib 0x39a0ac14 0x39a0a000 + 3092
13 libsystem_pthread.dylib 0x39a0aad8 0x39a0a000 + 2776
Thread 7:
0 libsystem_kernel.dylib 0x399a5c70 0x39992000 + 81008
1 libsystem_pthread.dylib 0x39a0ac1e 0x39a0a000 + 3102
2 libsystem_pthread.dylib 0x39a0aad8 0x39a0a000 + 2776
Thread 8:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2ebcd346 0x2eb81000 + 312134
6 CoreMotion 0x2f2484fc 0x2f20f000 + 234748
7 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
8 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
9 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 9 name: WebThread
Thread 9:
0 libsystem_kernel.dylib 0x39992a50 0x39992000 + 2640
1 libsystem_kernel.dylib 0x39992848 0x39992000 + 2120
2 CoreFoundation 0x2ec205e4 0x2eb81000 + 652772
3 CoreFoundation 0x2ec1ed04 0x2eb81000 + 646404
4 CoreFoundation 0x2eb89724 0x2eb81000 + 34596
5 CoreFoundation 0x2eb89506 0x2eb81000 + 34054
6 WebCore 0x36ebfc70 0x36e01000 + 781424
7 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
8 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
9 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 10 name: JavaScriptCore::BlockFree
Thread 10:
0 libsystem_kernel.dylib 0x399a4f2c 0x39992000 + 77612
1 libsystem_pthread.dylib 0x39a0bf62 0x39a0a000 + 8034
2 libsystem_pthread.dylib 0x39a0cd9c 0x39a0a000 + 11676
3 JavaScriptCore 0x2fbb8308 0x2fba6000 + 74504
4 JavaScriptCore 0x2fbb5970 0x2fba6000 + 63856
5 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
6 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
7 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 11 name: JavaScriptCore::Marking
Thread 11:
0 libsystem_kernel.dylib 0x399a4f2c 0x39992000 + 77612
1 libsystem_pthread.dylib 0x39a0bf62 0x39a0a000 + 8034
2 libsystem_pthread.dylib 0x39a0cd9c 0x39a0a000 + 11676
3 JavaScriptCore 0x2fd56cb2 0x2fba6000 + 1772722
4 JavaScriptCore 0x2fd56d0c 0x2fba6000 + 1772812
5 JavaScriptCore 0x2fbb5970 0x2fba6000 + 63856
6 libsystem_pthread.dylib 0x39a0c956 0x39a0a000 + 10582
7 libsystem_pthread.dylib 0x39a0c8c6 0x39a0a000 + 10438
8 libsystem_pthread.dylib 0x39a0aae4 0x39a0a000 + 2788
Thread 0 crashed with ARM Thread State (32-bit):
r0: 0x00000000 r1: 0x00000000 r2: 0x00000000 r3: 0x27d1f553
r4: 0x00000006 r5: 0x3b90118c r6: 0x0000000b r7: 0x27d1f5bc
r8: 0x0000000b r9: 0x00000001 r10: 0x00626000 r11: 0x00000000
ip: 0x00000148 sp: 0x27d1f5b0 lr: 0x39a0d7b7 pc: 0x399a51f0
cpsr: 0x00000010
Zane B Stein
("os_version":"iPhone OS 7.1.2 (11D257)","version":"104","bug_type":"198"}
Incident Identifier: 3526E805-4C03-4956-83B6-2A4AB95B9EE4
CrashReporter Key: cfa389285f4559a21d797bfeec6a78c584e798d6
Hardware Model: iPhone5,4
OS Version: iPhone OS 7.1.2 (11D257)
Kernel Version: Darwin Kernel Version 14.0.0: Thu May 15 23:10:37 PDT 2014; root:xnu-2423.10.71~1/RELEASE_ARM_S5L8950X
Date: 2014-09-02 14:24:12 +0800
Time since snapshot: 220 ms
Free pages: 1448
Active pages: 17896
Inactive pages: 9268
Speculative pages: 11
Throttled pages: 209561
Purgeable pages: 261
Wired pages: 21682
File-backed pages: 26187
Anonymous pages: 988
Compressions: 456385
Decompressions: 85356
Compressor Size: 44
Uncompressed Pages in Compressor: 59
Largest process: astrogold
Processes
Name <UUID> rpages recent_max fds [reason] (state)
CloudKeychainPro <b9fbb8e4989732709cb18c481dfa61a9> 108 108 200 (daemon) (idle)
mediaremoted <051ef8b6e7c93fa49a0a2e15ea6e1f52> 193 193 200 (daemon) (idle)
MobileGestaltHel <c3c9c32948fe364f8103dd528164b610> 123 123 200 (daemon) (idle)
DuetLST <89027d811bd73931a4d45f71c9bbebc7> 472 472 200 (daemon) (idle)
itunesstored <00f47fa85c623cee9d55c9b004ba561d> 1426 1426 200 (daemon) (idle)
lsd <8d2569b7b89033328609c73d07410b55> 149 149 200 (daemon) (idle)
sandboxd <712c543459bf3d81b0ec88bba199d802> 96 96 200 (daemon) (idle)
geod <6e5e9ae33f8638b7be848eac2c1ef70b> 166 166 200 (daemon) (idle)
assetsd <6f28405c4c1b35e9aff946c1c4799c0f> 868 868 200 (daemon) (idle)
installd <185a1eaa735b3aa38d98092ba8493ba0> 201 201 200 (daemon) (idle)
securityd <47657a3a48573d6a8e52ef4cc868248c> 617 617 200 (daemon) (idle)
networkd_privile <234d3717143e3bbba12acc5de334deaf> 81 81 200 (daemon) (idle)
accountsd <5a5640b47fe637bebb6254deff26eaee> 438 438 200 (daemon) (idle)
routined <d5590a1879153ed284886271907ea8fa> 344 344 200 (daemon) (idle)
EscrowSecurityAl <d0a689490be631efac2c764fe93300dc> 166 166 200 (daemon)
mstreamd <a2bb6401f1d63c7aa320a817d8839522> 406 406 200 (daemon)
tccd <ad9819a843e93a1680335febb52c7cc3> 227 227 200 (daemon)
kbd <eba296f6bd4938688fa16a5e39fa477c> 2319 2319 200 (daemon)
CVMServer <c95a902a5ae331c2a5239b6cf98a0617> 89 89 200 (daemon)
astrogold <58c53f7c8e8931ec823713195426f59c> 166401 166401 200 [per-process-limit] (frontmost) (resume)
identityservices <d1b907f8a41e3ebd9f270aa846040b07> 581 581 100 (daemon)
wifid <2b4c0ddf1a8439838868bf2be61d8bf1> 1286 1286 25 (daemon)
syslogd <5c06b8eec36032b49cc9421348ba47ea> 132 132 50 (daemon)
locationd <b813efaa4a6a314cafdbbd9b88c30796> 1732 1732 100 (daemon)
powerd <bd077d109d773bcd9041153b30ea034a> 128 129 100 (daemon)
imagent <79bd0fedda583ae3822051093f7681b5> 571 571 100 (daemon)
vmd <f44f0a6a37293606865eb8862c10b653> 188 188 100 (daemon)
iaptransportd <818588012ed93eb7a10ccb22d8acadfe> 223 223 50 (daemon)
mediaserverd <e40c7476d9fe3d759bfd28b8d68dc7ba> 2233 2233 200 (daemon)
mDNSResponder <60e905f9582a3090ab6e7a257454389e> 226 226 100 (daemon)
apsd <b7e19d27180e34aba845e475eae7d3db> 510 510 100 (daemon)
dataaccessd <fdf81960fb903bd68616117fd29ce277> 2563 2563 200 (daemon)
sharingd <2c731a1c182637a39b004694b2a5e23d> 508 508 50 (daemon)
mobileassetd <08440fa17b3537afb347cf78aa039a67> 565 565 200 (daemon)
SpringBoard <f73e83ffc898302394baa2042ca232fd> 9211 9211 100
backboardd <b5d33ca6da9c33d48e2c8ccb9930c3dc> 8716 8716 50 (daemon)
aggregated <3e381378eb7f3dd2846920cb5db91265> 523 523 50 (daemon)
lockdownd <d998e2bac7663966bd0285c07ed89111> 276 276 100 (daemon)
configd <20b29bb0286e347ebe7c42aa8ee421c9> 462 462 100 (daemon)
fseventsd <8876b6f5a0c13024a12cb3e148ddab61> 303 303 100 (daemon)
fairplayd.H2 <243ccf92ad4d34cbb4fdf7e078d55141> 130 130 100 (daemon)
wirelessproxd <47699be4861c30abbb375e1d3b9e15dc> 153 153 100 (daemon)
BTServer <51d0d4421dc73abf9d4844e2b155c340> 536 536 100 (daemon)
distnoted <7895f761ec323e31a356860060f8713d> 155 155 100 (daemon)
UserEventAgent <9aedc371d1c037e7b5d7b5577f0424a8> 756 756 100 (daemon)
WirelessCoexMana <f5dcce7805a9308bbbcf2d52751385ef> 132 132 100 (daemon)
networkd <148d4512d2c43efc95bafd487fd97f4a> 577 577 100 (daemon)
filecoordination <7b1b1b1b4fe0364c8e0adfd90f78b4a9> 207 207 200 (daemon)
medialibraryd <fdf252b3fb1a3646a836c0c3b5840464> 634 634 200 (daemon)
touchsetupd <0a4f35337aa13e55a3d7e56296499e14> 154 154 200 (daemon)
ubd <30a03e11a5c43c7cbd6ecd1aaef27841> 470 470 200 (daemon)
CommCenter <463e099ed64e30ad9433b8ea3f4a4e94> 2039 2039 100 (daemon)
notifyd <5b4c0731afd533179b295e4f39e589d6> 335 335 100 (daemon)
**End**
<Post Edited By Host>Thank you for your reply.
>You can double-click the home button and then swipe upwards on the thumbnail of the app to force it closed.
Did that
>After that, power the phone off and back on again, test.
Did that
>If still a problem, force close the app again and then reset the phone, holding the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot, test.
Did that
>If still a problem, then connect the device to iTunes and restore from backup.
Did that
>If that does not work, it is possible there is something corrupt in the backup. The final step is restore as new, not from a backup.
This is the only thing I had not done before I posted my initial request for help. I will work on that....it's a last resort I was hoping not to do, but it sounds like I've already done everything else.
Thank you.
Maybe you are looking for
-
Error while Reinstalling at Phase 6
Hi Can u pls check this snap-in, what could be the error ASSERT(arguments.callee, creation_ok, "SDB: ERROR WHILE DB INSTANCE CREATION! CHECK THE XCMDOUT.LOG FILE! "); SDB: ERROR CREATING DATABASE INSTANCE! Check the XCMDOUT.LOG FILE XCMDOUT.
-
Difference between Business area and profit center accounting
Hi Frnds, Can any body explain about difference between business area and profit center accounting .
-
Application Builder page ORA-06502
I'm having the same problem as described in this old thread that doesn't seem to have been resolved: application builder page error ORA-06502 After logging in, I click Application Builder and get this error message three times: report error: ORA-0650
-
my dowload said 91% done then it stoped im not sure how to comtinue the dowload i see some programs on my screen but is this all of them?
-
How do I learn about my missing $3000 computer?
I ordered an iMac and it arrived DOA. I sent it back for a replacement and it was received the days ago. I have called asking about a replacement and the phone helper said they would send it. How long should I wait? I also paid for apple care whi