When I run Premiere Pro CS5, it works for awhile then locks up

My machine has 16gb of memory and a Intel 7 processor. When I run Premiere Pro CS5, it works for awhile
and then locks up for anywhere from a few seconds to over a minute. Can anyone dignose this problem?
Could it be where Premiere is installed in relation to where my files are stored?
Any help with this vexing problem would be appreciated.

I edit AVCHD with the computer described in http://forums.adobe.com/thread/652694 and have no problems
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input source & output export files
How many hard drives do you have, and where is everything located?

Similar Messages

My 2014 MacBook Pro with retina displays crashes when I run Premiere Pro CS5

Hi,
I just purchased a 2014 MacBook Pro with Retina display with the following specs:
2.8GHz Quad-core Intel Core i7, Turbo Boost up to 4.0GHz
16 GB 1600MHz DDR3L SDRAM
Intel Iris Pro Graphics and NVIDIA GeForce GT 750M with 2GB of GDDR5 memory
I am running Premiere Pro CS5 with Mercury Playback GPU Acceleration enabled, but my computer keeps freezing and I have to restart it every time. Any kind of help or feedback would be greatly appreciated.
Thanks.

I had to call Apple and the tech made me enter a bunch of terminal commands to fix this. Unfortunately I can't tell you excactly what it was. I think the best way would be to call Apple.

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

Mac Premiere Pro CS5 update only for DVD installations?

Received notice that there is a patch or update for the newly released CS5 Premiere Pro for Mac. This does not appear within the app's check update menu option. Further, when the patch is located on Adobe's website, it indicates that it is for the DVD installation of PPro CS5 only. The version I work with was a download purchase, and no, it does not work with the available patch. The question is - anyone (Adobe?) know how the update is to be applied to download CS5 purchases, and why the difference anyway?

Not exactly. The patch applies to both DVD and downloaded installations. If you are getting the patch via Adobe.com, pick the one for electronic installations - it's there. We had a change to our installers this cycle and will require separate patches for DVD vs. downloaded installations for the time being.
If you are running Premiere Pro CS5 that was downloaded from the site, it does not include the patched code. We never make changes to the electronic versions of the code on Adobe.com - no matter when you download CS5, it's the same as the application that's on the DVD.
If you are updating via AUM, it will know which patch to install.
Sheri

My 4s is locking up. Seems no reason all all. All apps up to date. Facebook locks up. Photo locks up. It works for awhile then nothing. Replacement only alternative or do I have an Apple virus?

It works for awhile then nothing. Replacement only alternative or do I have an Apple virus?

Try resetting it: hold the on/off and home buttons simultaneously for 10-15 seconds until you see the Apple logo (ignore the off slider that appears first), release and wait for the phone to restart.

Encore CS5 hangs when called by Premiere Pro CS5 using Dynamic Link

Need help from folks,
Have done so far:
1. unistall CS5 package , reinstall CS5 package Production Premium. Reinstall all updates. Still get the problem.
2. Problem seems to be pop-up screen do not accept any 'click' to input answer to Encore CS5
3. Premiere Pro CS5 working fine
Please help.
TT

Thanks again pointing out the Adobe CC Cleaner URL
When I said CCleaner previously, I was refering to a program that clean out garbages from PC (broken links, shortcuts, temp files, etcetera..)
But late on, I have found out Adobe CC Cleaner (for Creative Cloud and CS5, CS6...) for cleaning Adobe craps after un-install.
I just wish the hotline could mention it and not having me to swim to find out that tool does exists saving some precious time.
Here is the status and what I have done to fix the problem:
...yeah, I was shooting in the dark...
1. Uninstall completely Adobe Premiere Production CS5 (remove preferences)
2. Run Adobe CCleaner (choose "all")
3. Shutdown PC, reboot and Cleanup and Defragment C: drive
4. Re-install completely Adobe Premiere Production CS5 (all products)
5. Re-apply completely Adobe Premiere Production CS5 (all products)
       (note: for some reason, I need to do it three times to get the complete updates done, just retry and no changes between retry)
6. Result : PremierePro still working fine, still hangs on Encore
       (Encore dialog screen was frozen as before from the begining and I had to use "Window-Task-Manager" to "end-the-task" of Encore)
7.Conclusion: the problem is on the PC not AdobePremiereProduction
8. Decision: Restore previous checkpoint of Window-7 Professional components
9. Redone steps 1,2,3,4,5
10. The result is the same as mentioned in point 6 and the conclusion is the same as mentioned in point 7.
11. Ultimate Decision: Ground-zero style resfresh (see the follwoing steps)
12. Separate Data from Window-7 (Move out all data from PC and unplug all connected portable hard drives
13. Factory restore of Window-7 Professional using DVD-rescue (hard drive C: wiped out and reformatted)
14. Apply all Updates for Window-7 Professional (over 121 updates, over 700Mb and many shutdown-reboot)
15. Reconfigure Wireless for connecting to Internet
16. Re-Install McAfee Antivirus
17. Re-Install some usefull Softwares (Microsoft Office 2010 Professional, etcetera... Shareport for wireless USB Printer)
18. Lot of Canon and Sony Softwares not re-installed because not used and not needed for now
19. Clean install AdobePremiereProduction CS5 (no need to run Adobe CCleaner)
20. Apply all updates for AdobePremierProduction CS5 (result is intermittent and have to retry few times to get it completed)
21. Apply one by one updates for every single Adobe product to get it done\
22. Shutdown and cleanup C: drive and defragment C; drive
22. From now on, I am sure to have a FRESH an CLEAN PC with a CLEAN CS5
23. RESULT: AdobePremierePro-CS5 still working perfectly AS BEFORE
24. RESULT: AdobeEncore-CS5 standalone do not hang ANY MORE
      but get error on MICROSOFT VISUAL C++ ? (with no details and some question marks) new
24. Get message saying QUICKTIME not installed (with warning)
25. Okay, install QUICKTIME from Apple to please CS5
26. Shutdown PC, reboot PC just to be sure everything kick in properly
27. RESULT: same as in point 24 (get error on MICROSOFT VISUAL C++ ? (with no details and some question marks)
28. It's SHOOT in the DARK, ON MORE TIME, BABY
29. Focusing on MicroSoft Visual C++ component: Comparing Installed products between my OLD PC and the freshly factory restored one
30. The old PC has Microsoft Visual C++ 2005,2008 and 2010 (both x64 and x86)
31. the new PC only has Microsoft Visual C++ 2008,2010 (both x64 and x86)
32. Decision : Install Microsoft Visual C++ 2005 (both x64 and x86) (trying to have same softwares on both PC)
33. Reboot PC after install
34. AMAZING RESULT: Adobe-Encore-CS5 is functionning OKAY
35. Testing time: I created a very small project in AdobePremierePro-CS5 and I was able to DynamicLink to Encore-CS5 and I was able to create on disk a DVD
      and I was able to play that DVD
36. DID I DO ALL THOSE STEPS FOR NOTHING, WHY IT WAS SO COMPLICATED,
      I WILL TEST IT AGAIN WITH MY BIG PROJECT (76 Ggis and 1 hour 18 minutes Blu-Ray) sometimes this week
     I SPENT TOO MUCH TIME TROUBLESHOOTING AND I AM LOOSING MY CREATIVITY (....LOL...)
      BELIEVE ME, I AM EXHAUSTED AND NEED SOME REST.
37. The End

Exsternal harddrive drops out, when using adobe premiere pro cs5. Cant load projects. any one had this problem or the answer to it?

I have two WD external hard drives that i keep all my video files, music and adobe premiere pro cs5 projects on. Up until 2 days ago they were working perfect, now they drop out when i try and load my projects from them, or watch a movie from them. tried restoring from two weeks ago and nothing changed. I get that error msg when i try and load something. The error msg is the one that comes up when you disconnect a usb drive without ejecting it correct. I don't think its the drives as i only use one most the time, and the other just sits there not connected, but that are now having the same issues. Help me plaza

yea i am using the right sequence
here are 4 screen shots of 2 different things i was editing, both used to record my xbox 360 with Hauppauge, Seems adobe is the only program playing the video file with the audio out of sync/mixed up
[URL=http://imageshack.us/photo/my-images/803/screenshotlrh.png/][IMG]http://img803.imageshack.us/img803/1669/screenshotlrh.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/826/screenshot2yv.png/][IMG]http://img826.imageshack.us/img826/3012/screenshot2yv.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/841/screenshot3aa.png/][IMG]http://img841.imageshack.us/img841/7042/screenshot3aa.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/5/screenshot4on.png/][IMG]http://img5.imageshack.us/img5/6096/screenshot4on.png[/IMG][/URL]
The Yellow Devil May Cry video is the video with the audio problem,
The metal gear rising video is red because of the pic above it, and the sound works ok on that, infact that video is finished and uploaded to youtube now.

Premiere Pro CS5.5 working with ENPS

Hi all and Adobe team,
I would like to get some information about the new panel about ENPS with Premiere Pro CS5.5 and it's workflow.
But I didn't get its information from Adobe and ENPS' website. Could you please give me any information or documents about it?
Thank you!
Best regards,
Nick

Hi Kevin,
Thank for your reply!
In fact, I have read this PDF before I post this subject. But I think in this document, the introduction about Premier Pro and ENPS integration was too simply. I can't to know what's it and how does it work. Actually, I don't have Premiere Pro CS5.5 and ENPS right now, but I would like to have a deeper understanding about it and consider to get this system, because I have heard that's very awesome!
Whatever I would like to know the detail about this integration. Could you give more information?
Best regards,
Nick

Premiere Pro CS5 -capture settings for canon 30f/24f?

Latley I have been using a canon xha1 for some simple work projects. I am new to the HDV workflow, and I am very thrown off by the XHA1 formats and how to properly capture them.
I have not been able to find the proper way to set up a sequence for 30f settings. Knowing that the 30f is not really progressive which settings should I use. (also what would the proper settings be for 24f?)
PP CS5 seems to have the Canon XF MPEG2 presets. as well as the standard HDV settings. Below is a screen shot of what I assume I should be capturing with.
Lets say the footage is 30f. Which of the following should I use. Or is it netiher due to the 30f being interlaced. Any help would be grealty appreciated.
(Premiere Pro CS5 on windows 7)

function(){return A.apply(null,[this].concat($A(arguments)))}
Colin Brougham wrote:
You'd use the HDV 1080i30 preset for both; they're both interlaced.
That's not really true. These formats carry the flags to tell the NLE which frames to drop. It is progressive.
I use an HV40 with "f" mode all the time and Premiere reads it correctly as progressive. Even after dropping a clip on the make a new item icon.

Strips in files when encoding in Premiere Pro CS5 to Mediaencoder

Hello,
since a short time I moved to Creative Premium Pro CS5. Unfortunatelly I have several issues when rendering jobs. In CS 4 32 Bit export via Mediaencoder worked fine. Now when I use the same Peoject from CS4, load it into CS5 Premiere Pro and export the sequenz to a an AVI or .mpg file (does not depends on what kind of export file), I have color strips vertically in the ranges of dissolves, left and right in the picture. This disturbs when playing the file on a PC-Mediaplayer. When I check the highest render quality in the media encoder, then the strips are away. Is that a bug in CS5?
Thanks for any answer.
André

You provide very little information, so...
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Also... nVidia has MANY card driver versions, not all of which are 100% good with CS5... at least for Win7 64bit
Since you don't provide your OS, you might do some checking to see if your nVidia driver either needs to be updated, or maybe rolled back to a previous version... since there was a recent thread about the latest nVidia driver causing problems for one person, but rolling back to version 197.45 fixed his problem

Premiere Pro CS5 native support for Canon 5D/7D

So now that the newest version of Premiere Pro will offer native support for HDSLR like the Canon 5D and 7D, does this mean that editing will be much faster?? Meaning, is there no reason now to export to an intermediate codec like Cineform for faster editing because CS5 will be able to edit the h.264 files without lag? I was just curious as this will make up my decision of upgrading from CS4 to CS5.

Through history, Adobe has promised a lot of things that have:
- Caused many to experience that it's not so, and therefor a lot of screaming/complaints. Most of which (screaming/complaints) has been because people are doing something that is not correct, or installed stuff that screws things up, and so on.
- Caused many people to get great benefits from the new features, and they (many people) have computers that they keep clean and follow needed specifications.
- Sometimes things just don't work, or stop to work (Clip Notes in CS3).
The funny thing is that I have CS3 and edit the video footage from my 7D natively without any problems whatsoever. OK, maybe not quite realtime playback without rendering the timeline, but pretty close. My PC is quite ordinary, Q6600 CPU, 4GB RAM, and 8800GT w/1GB RAM, no over-clocking or special treatments done.
The little extra funny thing is that if I apply MB Looks to my 7D footage, it gets to be more or less realtime playback, probably because Looks forces the GPU to be used.
Bottom line:
Whatever Adobe promises, you'll have to make sure you have the clean gear for it if you want it to work. Except for that, some just are lucky.
Dag

Premiere Pro CS6 stopped working, for one user profile

So Premiere Pro CS6 wouldn't open today. Opened fine yesterday, and the days before that. The program didn't crash yesterday or close improperly. I just get the logo splash screen, but I don't see the usual text stream of applications starting up on it. After a long time I get a Windows message saying it can't open the program.
- I used Bridge to update to the latest version. No help.
- I made sure Quicktime was updated.
- I cleared the preferences by moving the whole My Documents\Adobe\Premiere Pro\6.0 folder somewhere else (as a backup). Next time I tried starting the program it created a new \6.0 folder but that's as far as it went.
- I deleted AppData\Roaming\Adobe\Adobe Premiere Pro. Starting the program recreated the folder, made a Trace Database file but only put two entries in it:
DynamicLink 1 5
FE.WinInit.LocPlugins 1 5
And then it stops there. No other files created.
- Tried starting the program holding the Shift Key, and again with the Alt key, and again with both. No change.
- Rebooted after every change.
I tried logging out as the video user account and logging in with my personal account, and then Premier Pro opened just fine.
Problem is, I need it to work on the video user account because it was created specifically for our video editing PC. Our company logins also tie into our email and other programs. This one was created specifically so more than one person could share Premiere Pro settings and resources, and there was a battle with our IT to get it because they despise generic accounts.
I've seen other threads here mentioning startup problems but the solutions listed there don't work for me. Manually trashing the \6.0 folder didn't help. I don't have a .pref file or Preferences folder other than the \6.0 one. I haven't made any changes to the PC. The video drivers must be OK or it wouldn't start under the other user account. How do I fix this one?

This was Microsoft patch week... did you install Windows updates?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

My 4 yr old is addicted to you tube on ipad 2 all of a sudden screen is black cant play anything.... Reset settings it worked for awhile then he did it again don't know how he is doing it anyone know...

4yr old addicted to you tube..... All of a sudden screen is going black...did a reset which sorted it out then he did it again..... I don't know what he is doing to cause this...... Anyone know how to fix it.... Thanks Louise

Louise
If you want some advice from a parent who has a 5yr old, a 3yr old and a 1yr old using Ipads... Keep them off the Youtube stuff.. It has caused more problems for me than anything you would believe..
From issues with the Ipads... finding they have gone from Dora the Explorer vidoes to cartoons of characters called poopman... and the biggest problem.. I think the overdose of Ipad usage has ruined my kids from doing what regular kids should be doing.. On xmas they opened all their gifts, then just went back to the ipads.. I thought Candyland and Chutes and Ladders would be a big change.. Forget it.. They need rehab from Ipad..

Premiere Pro CS5 No Longer Saves Project

I am working on a Mac OS X Version 10.6.8 with 2 x 2.8 GHz Quad-Core Intel Xeon Processors and 12 GB 800 MHz DDR2 FB-DIMM Memory. I am running Premiere Pro CS5 on this machine.
I work for a company who produces 50-100 short, education-based videos for clients across the country to post on YouTube. The model we use is not complicated, but geared toward getting these videos edited with graphics and music quickly so they can be released slowly over time. So, needless to say, I'm accessing their project files quite often, until all of their videos are edited. For some reason, however, after a certain amount of times opening & quitting the program, the project no longer saves. This has happened to TWO projects so far (one using AVCHD footage, and the other Canon MXF files).
Here's what happens:
The project starts to take longer to save, then, one day I go to save or Auto-Save kicks in and the dialog box comes up but the progress bar never changes.
It will stay this way as long as I let it, but as soon as I click "Cancel" Premiere freezes up and I have to resort to "Force Quit".
It is at this point that I become aware of the insanely large file size of the project....in this particular case, 380.2MB.
I have tried:
- "Save As"
- Duplicating the project in Finder and opening the copy
- Opening Auto-Save Files
- Creating a new project completely and importing the old project
- Trashing Preferences
- And even resetting the workspace to the default "Editing" workspace (a suggestion when Googling the problem).
None of the above has helped.
Luckily, at my company, we have another machine (Mac OS X ver. 10.6.8, 2 x 2.4 GHz Quad-Core Intel Xeon Processors, 12 GB 1066 MHz DDR3 Memory) which runs CS5.5. As a workaround, I've been able to take these projects over there and just continue to work on them in CS5.5. But, obviously this is not a solution. I'd like to know what the problem may be behind all this, especially since this is a problem that could theoretically happen in CS5.5 down the line.
Any insight is appreciated, and please let me know if you need more info on my part!!

Maybe it was a 32 bit plug-in?

Why is Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

I just upgraded from Production Premium CS4 to Production Premium CS5. Have Windows 7, 64 bit OS, 9 GB ram,
Intel I-7 quad 2.67 processors (over clocked to 2.90 ghz) with hyperthreading. I have nothing of any real substance
operating on my system besides Adobe. I have just loaded in a ton of DVC PRO HD 60 footage and am editing a 30 minute
program. Once I am in Adobe Premiere Pro CS 5, it works fairly well, everything works well real time. However, the moment
I click outside of Premiere Pro like to my desktop, then try to click back into Premier Pro, my screen goes white, Premiere Pro says
"not responding" in the title bar and everything freezes for about a solid minute. CS 4 did not do this at all. Anyone know what is happening?
Tks. eddiem

Thank you Harm for the info so far. I appreciate it. Seeing that this is an issue, let me give you a little more data than I might normally do in the hopes of helping to resolve this issue and possibly, you will be able to distill from this something of use for all of us.
I tried out what you said to do, clicking in the timeline first or even while the blue wheel is in motion, but it makes very little difference. Let me give you a little more info. As an attempt to have resolved this which I have not, I am essentially working offline and the problem still persists. I have internet connection disabled, I have all anti-virus and firewalls turned off, I have gone through the task manager and have ended every single process not essential to running Premiere Pro CS5.
All it takes is for me to click on the desktop with nothing open and then click back to the Premiere Pro CS5 window whether it be in the timeline or anywhere and I get the blue circle going. When I do what you say, even while the blue wheel is going, and I try to click on the timeline, the premiere pro window goes white with the blue wheel still going and locks up for at least a minute.
Some other outpoints that may be related to the same issue:
Additionally, when using the media browser and I double click on the P2 media thumbnails to bring the media to the source window, I get a long delay
to load the footage. Usually about 10-15 seconds for EACH piece just to view it. Needless to say, this makes editing essentially impossible. I have also tried settings on the memory preferences section changing between "performance" and "memory" not really knowing if that would have anything to do with it, but it didn't.
Another mysterious thing is that my editing tools window never shows up even, even when I reset the editing workspace (window-workspace-reset current workspace (with "editing" bulleted). I have to manually open up the window and then drag and drop it back to its normal place each time.
Needless to say this is making the experience terrible.
I checked my loaded and running programs to further resolve this to make sure I did not have some unknown system drain, and happened to see I still had the old Production Premium CS 3 installed but not running, so I uninstalled that and it made no difference. It hadn't been running anyway.
What is frustrating, Harm, is that my Premiere Pro CS4 was running great. When I started working with P2 media on CS 4 on the same system, I had noticed a similar lag in loading P2 media which I thought was odd, but I NEVER had the delay and blue wheel and white screen clicking from one application to another. The only time on CS4 I even experience a slow was when I had PPro4, AE4, AME4 and Encore 4 all opened at the same time!
Funny thing though, when I have Premiere Pro CS5 and AE CS 5 opened, AE runs fine, but Premiere seems to be hog and is just slow. I never have a problem going in and out of the other Production Premium applications.
I am using an Asus computer, with Intel Core i7 processor 920 @ 2.67ghz. I have standard overclocking software, and when I overclocked my processor to run as an i7-940-2.93 ghz, that lag on the loading the P2 media into the source window went away on CS4.
However, since being on CS5 it now does the same thing.
It is so bad that I thought I okay I will go back to CS 4. However, now when I try to use CS 4, it is doing the same thing, yet this did not do that before installation of CS5!
Let me give you just one more bit of data in the hopes that it may help in resolving this. The way I installed Production Premium CS 5 was first via
the trial software. While that was downloading, I purchased the software and I installed the serial number at the time of installation. The reason I mention this is that before I purchased it, I was interested in seeing if CS5 would handle a codec problem I was experiencing going from premiere pro to encore DVD ( this will be the subject of another thread) and I was assured by the salesman it would (it didn't) and that the trial software is fully functional!
Well, that is untrue, and the salesmen and the sales supervisors (spoke to them all) are very seriously misinformed. The Trial version is NOT fully functional, however, you do not find out about it until you actually get the download page and then it clearly says in small print that encore and various HD codecs are not operational as well as some AE aspects on the trial version.
The reason I tell you this is that I don't know if installing via the trial software version makes any difference in how it sets up.
The significance of this is that I was told that Premiere Pro, After Effects and Encore build upon CS4 and you cannot uninstall CS 4 before loading the upgrade to CS5 nor should you uninstall it afterwards.
So this now possibly explains why the previous CS 4 I have on the system is also now responding just like CS5. (I don't know if it makes any difference, but CS5 installed Premiere Pro, After Effects and Encore in the C:\Window\Programs folder yet all other components are installed in the C:\Windows\Programs(86) folder. (My dynamic links work fine (so far) between Premiere and AE and Encore)
Okay, Harm, sorry I wrote so much but possibly this will help, and I hope there is something I can do immediately to resolve these serious delay (lag) issues.
PS: I have three internal hard drives. CS5 is installed on the C drive same as my OS and all my footage and premiere pro pjts are saved onto a different drive. Everything is 7200 rpm, 1TB, Sata 3Gb/s.. Except the internal drive where the PrPro Pjts and footage are stored is 2TB , 7200 RPM and 6Gb/s.

When I run Premiere Pro CS5, it works for awhile then locks up

Similar Messages

Maybe you are looking for