When I run set up... it extracts files somewhere but does not run

When downloading firefox set up software and runnning it... nothing happens... the files appear to extract, but the set up program does not run

Have you followed the instructions in [[Installing Firefox on Windows]]
Are you able to follow the instructions and use an Administrative account, turn off UAC and disable security software ?
Do you get any error reports ?

Similar Messages

  • √using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

    using sucessfully airport express for internet
    when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
    wanting to use extreme at base and express in another part of the house

    How is the express getting internet? What modem is it plugged into?
    How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
    IPv6 is also needed.. turn on local link.

  • Firefox insists on downloading a zip file with an application. Options is set to ask for download loaction but does not work

    When downloading a ZIP file I get a 'Launch Application' window.
    In Options I have set download to ask for a location and use the download window but this does not work.
    cannot find any way of changing this and there is no option for using an application.
    If I down load in IE I have no problems so it must be FireFox and not a system problem.

    I have found the problem.
    A download manager had been installed for a specific website and it was butting in all the time. Even after removing it with 'Add or remove software' it still had its hooks into the system and it was impossible to download anything as it now would not run.
    Had to do an XP 'System restore' before I could get rid of it.
    The offending program was MD_setup.exe size 3,045KB from the themediadownloader.com

  • When trying to set up syn with outlook 2010 - it does not show as an option

    When trying to set up syn with outlook 2010 - outlook it does not show as an option

    Hi smrkevin,
    Welcome to the BlackBerry Support Community.
    What version of BlackBerry Desktop Software do you have installed? If you do not have the latest version listed here: http://bbry.lv/ds97JW I would advise upgrading it.
    If you already have the latest version of Desktop Software, can you verify if you are running a Click to Run installation of Outlook? You can check this in Outlook -> Help -> About Microsoft Outlook. If you are using a Click to Run installation, you will need to install a full version of Microsoft Outlook to setup synchronization. For more information, see: http://bbry.lv/qDIoXO
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • I am unable to retrieve spreadsheets.  Numbers displays the "Welcome To Numbers" page but does not allow saved spreadsheets to be opened.  It offers the "Open Recent" choice and displays saved file names but does not allow these files to be accessed.

    I recently upgraded to Numbers 3.5.2.  I have an older Macbook Pro (2009) and I run Yosemite 10.10.2.  I am unable to open any saved files that were created with earlier versions of Numbers.  When I open the Numbers app, I am offered the Welcome To Numbers page.  When I choose the 'Open Recent' option, I am offered the greyed names of files that I had recently used, however, I am unable to open any of these files (no error message is displayed).  Welcome To Numbers stays on the screen.  I tried opening the app by clicking on the file name but it produced the same results.  I am having a similar problem with Pages.   I suspect a compatibility problem between the new OSX and the new iWork offerings.   Has anyone else encountered this problem?  Does it require a setting change or is it a bug?

    I managed to download and install the iWork '09 apps.  However, when I attempt to open the app, I receive this error message:
    Numbers cannot be opened because of a problem.
    Check with the developer to make sure Numbers works with this version of OS X.  You may need to reinstall the application.  Be sure to install any available updates for the application and OS X.
    Problem Details and Configuration:
    Process:          Numbers [39838]
    Path:               /Applications/iWork '09/Numbers.app/Contents/Mac OS/Numbers
    Identifier:          com.apple.iWork.Numbers
    Version          ???
    Build Info:     Numbers-2990000~12
    Code Type:     X86 (Native)
    Parent Process:  ??? [1]
    Responsible:     Numbers [39838]
    User ID:          501
    Any thoughts as to what has to happen next?  I am running the latest OS X available (Yosemite 10.10.2)

  • Using Win 7 64 bit. Problems w/ Firefox 3.6.6: (1) When I close it, it sometimes closes the window but does not stop operating. Yet, I cannot restart it. Only solution is to use Task Manager to shut it down, then restart it. (2) Will not open certain

    Using Win 7, 64 bit. (1) Firefox fails to stop when I close window; only solution is closing it thru Task Manager. (2) Firefox does not allow me to access certain corollary items such as opening emails I receive in online Groupwise and certain videos at websites, such as demonstrations.
    == I purchased new computer w/ Win 7 64 bit

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

  • After the last up grade not 5.0 I noticed that when I delete email from spam folder file the arrow does not snap to or move to the defalt button in a dialog box. I still use XP sp3. box

    I don't know of anything else to tell.

    Before trying anything else, do you have a recent backup of your profile folder?

  • Settings are correct in OPTIONS TABS w last box UNchecked so I stay on current page when r/c OPEN LINK IN NEW TAB. But does NOT work in FF History/Library

    Really frustrating when trying to open multiple links within FF HISTORY Library. Instead of opening the new tab & keeping me in the Library, I get switched over to the page as it's opening in FF browser.
    I can't find any info here or online to fix this.
    Thank you.

    There is this pref: browser.tabs.loadBookmarksInBackground
    But it doesn't have effect if you open links via the Library, it only works when opened via the browser window (menu, toolbar, sidebar).

  • I downloaded the trial version of Lightroom.  The file downloaded but does not execute

    I downloaded CreativeCloudSetup.exe.  I clicked on the the file but nothing happens.  My Task Manager shows that the file is in memory but not doing anything.

    Valenta3630 then the next step will be to review your installation log files for the error message preventing the Creative Cloud Desktop application from installing on your computer.  For information on how to locate and interpret your installation log files please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • When I click on my iTunes icon, it highlights but does not open.

    I can't open iTunes and haven't been able to for a couple days now. I can't find any solutions anywhere. Does anyone know a way to fix this?

    Hello esullz
    Check out the article below to start troubleshooting your startup issues with iTunes. You may need to test it in another user to see if it works there or it may need to be reinstalled.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    -Norm G.

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

  • When the apple review team review our app,they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

    when the apple review team review our app，they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of  trajectory replay come ture。in fact， we have added function when the app  is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when  the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
    the blow is the content of the review team email：
    We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
    We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
    It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
    For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
    If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
    "Continued use of GPS running in the background can dramatically decrease battery life."
    Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
    We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
    For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
    - complete details of your rejection issue(s)
    - screenshots
    - steps to reproduce the issue(s)
    - symbolicated crash logs - if your issue results in a crash log
    If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

    Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • File's Owner does not show methods in Interface Builder 3.2.6 but the class is set correctly and the nib on the lower left is green

    Hi, I'm trying to make my first IPhone app. After having problems with interface builder the first time I coppied the code directly from a tutorial in case I made any mistakes. I saved the program, and re-opened the .xib file. Right clicking  File's Owner does not show a list of methods. I've been looking around for solutions for this but have not gotten anything to work. I tried deleting the default .xib and creating a new one through file-> new file. This did not help. I did notice that File's owner was showing up as a light blue cube apposed to a yellow one now and found that a bit odd but otherwise nothing changed. I opened the library menu and selected helloWorldiPhoneViewController so it would show up in the view port. I set the class field of File's Owner to hellowWorldiPhoneViewController. File's Owner still does not show methods when right clicked or when a line is dragged over a button. I read somewhere that the color of nib on the lower left of the viewport may indicate a problem, but it is green not indicating any issue. Every solution I found for someone else seems nto to work for me and I don't know how to continue.
    here is the .h file just in case:
    //  HelloWorldViewController.h
    //  HelloWorld
    //  Created by Paul Peelen on 2011-03-14.
    //  Copyright 2011 9697271014. All rights reserved.
    #import <UIKit/UIKit.h>
    @interface HelloWorldViewController : UIViewController {
            UILabel *textLabel;
    @property (nonatomic, retain) IBOutlet UILabel *textLabel;
    - (IBAction)changeTheTextOfTheLabel;
    @end
    I'm trying to connect changeTheTextOfTheLabel to a button and textLabel to a label

    You need a parameter for an interface builder method. The type should be id and the name is typically "sender". It would look like this:
    - (IBAction)changeTheTextOfTheLabel: (id) sender;
    Be careful about those tutorials. Many are ancient and do not correspond to current Xcode behaviour.

Maybe you are looking for