When i save files using CS6 files go white

When I save files using CS6 and try to view them in other program (i.e. iPhoto, etc) the files show as a white box with no image. I'm using a Macbook Pro with Yosemite.

Most likely you have "maximize compatibility" off, and are using applications that can only read the composite image (which requires maximize compatibility ON).

Similar Messages

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

When I saved an Illustrator CS6 file to EPS format, I got "could not complete the requested operation. unknown error."

When I saved an Illustrator CS6 file to EPS format, I got "could not complete the requested operation. unknown error."
Google it and find some temp fix. run the illustrator by using "Run as admin" mode and fix the problem, but when use run as, can't see all the original user's mapping drives.
So still need it fixed.

It is win 7 64 bit system and same error on Illustrator x86 and x64.

How do I prevent effects from being rasterized/un-editable when I re-open my CS6 file?

Since upgrading to CS6: when I re-open Illustrator CS6 files, I find that effects such as dropshadow, etc. are rasterized as images or other elements that I can't edit as "effects". I'm the single author of these files, so they're being edited on the same computer and in the same program version. Anyone know why this is happening, and how to prevent it? It's really slowing me down.

Is it possible that you have opened older files created in CS5 or earlier? That in itself is not a problem, but if the file wants to keep that earlier version compatability when you save, then there's a mismatch between CS6 and earlier versions of Illustrator, especially around transparency issues like drop shadows.
Make sure to save as an illustrator .ai format and on the second screen of the save dialog box choose CS6 as the version.
Not sure if that's it, but worth checking. Hope that helps…
Michael Riordan
Adobe Certified Instructor
Digital DesignLab

I lost a .docx word file , then i found it as a .asd file in the office recovery folder , but i cannot save it as a docx, when i save as a docx file or any other format i cannot find it in the destination folder and

i lost a .docx word file , then i found it as a .asd file in the office recovery folder , but i cannot save it as a docx, when i save as a docx file or any other format i cannot find it in the destination folder

No, I already tried looking at that. The file that recovered was not in the trash, it appeared in my documents folder. I opened it up and inside was an iText Express document with coding. Then inside of there, was and then and this "SoftwareMap" document contained a bunch of coding and symbols and words.

How to Create a Flat File using FTP/File Adapter

Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
Ram

You can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng.

ALV issue: when save list using Local File command will get run time error!

help!!!!
report list using ALV method when to save this list using Local File.
i will get GETWA_NOT_ASSIGNED run time error information.
how resolve it?
source code :
REPORT   ZIFT0103.
TABLES : MARA,MARC,CDHDR,CDPOS,MAKT.
******DEVK909212****************
****利用工厂来区分不同的SERVER的FTP ADDRESS ,user ,PASSWORD
DATA: FTP_WERKS LIKE MARC-WERKS.
********定义一个RANGE用来抓取MARC的信息
RANGES:R_MATNR FOR MARA-MATNR OCCURS 0.
********定义一个INTERNAL TABLE 来抓取MARC 的信息
DATA:BEGIN OF IT_MARC OCCURS 0,
      MATNR LIKE MARC-MATNR,
      WERKS LIKE MARC-WERKS,
      USERNAME TYPE CDHDR-USERNAME,
     UDATE    TYPE CDHDR-UDATE,
     FLAG_UI TYPE C,
     END OF IT_MARC.
*******定义存放北京的数据的变量
DATA : BEGIN OF FTP_BEIJING OCCURS 0 ,
              MATNR(25) ,
              MATNR1(25) ,
              MAKTX(30) ,
       END OF FTP_BEIJING .
******定义福清的数据变量
DATA : BEGIN OF FTP_FUQING OCCURS 0 ,
              MATNR(25) ,
              MATNR1(25) ,
              MAKTX(30) ,
       END OF FTP_FUQING .
*******DEVK909212*****************
DATA : BEGIN OF FTP_ITEMDOC1 OCCURS 0 ,
              MATNR(25) ,
              MAKTX(30) ,
       END OF FTP_ITEMDOC1 .
DATA : BEGIN OF FTP_ITEMDOC OCCURS 0 ,
              MATNR(25) ,
              MATNR1(25) ,
              MAKTX(30) ,
       END OF FTP_ITEMDOC .
DATA: WA_ZMSGTA TYPE ZMSGTA ,
      l_ersda like MARA-ERSDA .
***********DEVK909553********************
****用来决定执行FTP还是显示LIST**********
DATA:g_tcode_flag.
***********DEVK909553********************
Error message process ******************************
DEFINE EXPLAIN_MSG.
   break soe_richard.
CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
    EXPORTING
      ID                = &1   "SY-MSGID
      NUMBER            = &2   "SY-MSGNO
      LANGUAGE          = SY-LANGU
      TEXTFORMAT        = &3
      LINKPATTERN       =
      MESSAGE_V1        = &4                                "SY-MSGV1
      MESSAGE_V2        = &5                                "SY-MSGV2
      MESSAGE_V3        = &6                                "SY-MSGV3
      MESSAGE_V4        = &7                                "SY-MSGV4
    IMPORTING
      MESSAGE           = &8   "WA_ZMSGTA-MSE1
      RETURN            =
    TABLES
      TEXT              =
END-OF-DEFINITION.
DEFINE ERROR_MSG_UPDATA.
CALL FUNCTION 'ZINSERT_MSG' "IN UPDATE TASK
    EXPORTING
      XZMSGTA      = &1    "WA_ZMSGTA
    EXCEPTIONS
      UPDATE_ERROR = 1
      OTHERS       = 2.
END-OF-DEFINITION.
IF SY-TCODE = 'ZIFT103' .
g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      PERCENTAGE = 0
      TEXT       = '请耐心等候,系统正在抓数据'.
ENDIF.
l_ersda = sy-datum - 1 . "取前一天产生的物料号码。
DATA:BEGIN OF it_change OCCURS 0,
     OBJECTID TYPE CDHDR-OBJECTID,
     USERNAME TYPE CDHDR-USERNAME,
     UDATE    TYPE CDHDR-UDATE,
     TABKEY   TYPE CDPOS-TABKEY,
     END OF it_change.
DATA:BEGIN OF it_cDhdr OCCURS 0,
     OBJECTID type CDHDR-OBJECTID,
     CHANGENR TYPE CDHDR-CHANGENR,
     USERNAME TYPE CDHDR-USERNAME,
     UDATE    TYPE CDHDR-UDATE,
     END OF it_cdhdr.
DATA:search_len TYPE I.
DATA:BEGIN of it_insert OCCURS 0,
     MATNR TYPE MARA-MATNR,
     WERKS TYPE MARC-WERKS,
     END OF it_insert.
DATA:BEGIN OF it_MAKT OCCURS 0,
     MATNR TYPE MAKT-MATNR,
     MAKTX TYPE MAKT-MAKTX,
     END OF it_makt.
DATA IT_MARA TYPE TABLE OF MARA WITH HEADER LINE.
DATA:BEGIN OF IT_OUT OCCURS 0,
     MATNR TYPE MARA-MATNR,
     WERKS TYPE MARC-WERKS,
     MTART TYPE MARA-MTART,
     MEINS TYPE MARA-MEINS,
     MATKL TYPE MARA-MATKL,
     MAKTX TYPE MAKT-MAKTX,
     PSTAT TYPE MARA-PSTAT,
     BRGEW TYPE MARA-BRGEW,
     NTGEW TYPE MARA-NTGEW,
     GEWEI TYPE MARA-GEWEI,
     FERTH TYPE MARA-FERTH,
     KZUMW TYPE MARA-KZUMW,
     ERNAM TYPE MARA-ERNAM,
     ERSDA TYPE MARA-ERSDA,
     END OF IT_OUT.
*-- DECLARE DATA FOR ALV
TYPE-POOLS: slis.
DATA : g_variant LIKE disvariant,
        g_save(1) TYPE c,
        g_exit(1) TYPE c,
        gx_variant LIKE disvariant.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE, "
      gt_events   TYPE slis_t_event,
      gt_list_top_of_page TYPE slis_t_listheader,
      gs_print TYPE slis_print_alv,
      gs_layout         TYPE slis_layout_alv .
******只能抓出系统有做更改的数据***************
******而第一次INSERT MARA的数据抓不出来********
START-OF-SELECTION.
SELECT AOBJECTID AUSERNAME AUDATE BTABKEY
INTO TABLE it_change
FROM ( CDPOS AS B INNER JOIN CDHDR AS A ON
     AOBJECTCLAS = BOBJECTCLAS AND
     AOBJECTID   = BOBJECTID   AND
     ACHANGENR   = BCHANGENR )
WHERE A~OBJECTCLAS = 'MATERIAL'
AND   A~UDATE = l_ersda
AND   B~TABNAME = 'MARC'
AND   B~CHNGIND = 'I'.
LOOP AT it_change.
   search_len = STRLEN( it_change-TABKEY ).
   search_len = search_len - 4.
   IF search_len > 0.
     IT_MARC-WERKS = it_change-TABKEY+search_len(4).
   ENDIF.
   IT_MARC-MATNR = it_change-objectid+0(18).
   IT_MARC-USERNAME = it_change-username.
   IT_MARC-UDATE    = It_change-udate.
   IT_MARC-FLAG_UI = 'U'.
   APPEND IT_MARC.
   CLEAR IT_MARC.
   CLEAR R_MATNR.
   R_MATNR-SIGN = 'I'.
   R_MATNR-OPTION = 'EQ'.
   R_MATNR-LOW = IT_MARC-MATNR.
   APPEND R_MATNR.
ENDLOOP.
****CDPOS is Cluster TABLE 所以没有办法用INNER JOIN******
SELECT OBJECTID CHANGENR USERNAME UDATE
INTO TABLE it_cdhdr
FROM CDHDR
WHERE OBJECTCLAS = 'MATERIAL'
AND   UDATE = l_ersda.
AND   TCODE = 'MM02'.
LOOP AT IT_cdhdr.
    SELECT * FROM CDPOS
    WHERE OBJECTCLAS = 'MATERIAL'
    AND   OBJECTID = IT_CDHDR-OBJECTID
    AND   CHANGENR = IT_CDHDR-CHANGENR
    AND   TABNAME   = 'MARC'
    AND   CHNGIND = 'I'.
      search_len = STRLEN( CDPOS-TABKEY ).
      search_len = search_len - 4.
      IF search_len > 0.
        IT_MARC-WERKS = CDPOS-TABKEY+search_len(4).
      ENDIF.
      IT_MARC-MATNR = IT_cdhdr-objectid+0(18).
      IT_MARC-USERNAME = IT_cdhdr-username.
      IT_MARC-UDATE    = IT_cdhdr-udate.
      IT_MARC-FLAG_UI = 'U'.
      APPEND IT_MARC.
     CLEAR IT_MARC.
      CLEAR R_MATNR.
      R_MATNR-SIGN = 'I'.
      R_MATNR-OPTION = 'EQ'.
      R_MATNR-LOW = IT_MARC-MATNR.
      APPEND R_MATNR.
      CLEAR IT_MARC.
    ENDSELECT.
ENDLOOP.
IF g_tcode_flag = 'L'.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
      EXPORTING
        PERCENTAGE = 20
        TEXT       = '处理好当天CHANGE的数据'.
ENDIF.
*******抓当天做了INSERT的数据*************
*******不需要***********************
SELECT BMATNR BWERKS INTO TABLE IT_INSERT
FROM MARC AS B JOIN MARA AS A
ON   AMATNR = BMATNR
WHERE A~ERSDA = l_ersda.
LOOP AT IT_INSERT.
   IT_MARC-MATNR = IT_INSERT-MATNR.
   IT_MARC-WERKS = IT_INSERT-WERKS.
   IT_MARC-FLAG_UI = 'I'.
   APPEND IT_MARC.
   CLEAR IT_MARC.
   CLEAR R_MATNR.
   R_MATNR-SIGN = 'I'.
   R_MATNR-OPTION = 'EQ'.
   R_MATNR-LOW = IT_MARC-MATNR.
   APPEND R_MATNR.
ENDLOOP.
IF g_tcode_flag = 'L'.
   CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
       PERCENTAGE = 40
       TEXT       = '处理好当天INSERT的数据'.
ENDIF.
IF g_tcode_flag = 'L'.
    PERFORM get_MAKTX.
    PERFORM get_mara.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
      EXPORTING
        PERCENTAGE = 100
        TEXT       = '处理好数据,并开始显示数据'.
    PERFORM do_data.
    PERFORM display_alv.
ELSE.
    PERFORM get_MAKTX.
    PERFORM do_ftp.
ENDIF.
*&      Form get_marktx
      text
FORM get_maktx.
SELECT MATNR MAKTX INTO TABLE IT_MAKT FROM MAKT
WHERE MATNR IN R_MATNR AND SPRAS = '1'.
ENDFORM.                    "get_marktx
*&      Form get_mara
      text
FORM get_mara.
SELECT * INTO TABLE it_mara FROM MARA
WHERE MATNR IN R_MATNR.
ENDFORM.                    "get_mara
*&      Form do_data
      text
FORM do_data.
SORT IT_MARC BY MATNR WERKS.
DELETE ADJACENT DUPLICATES FROM IT_MARC COMPARING MATNR WERKS.
LOOP AT IT_MARC.
    CLEAR IT_MAKT.
    CLEAR IT_MARA.
    READ TABLE IT_MAKT WITH KEY MATNR = IT_MARC-MATNR.
    READ TABLE IT_MARA WITH KEY MATNR = IT_MARC-MATNR.
    MOVE-CORRESPONDING IT_MARA TO IT_OUT.
    IT_OUT-MAKTX = IT_MAKT-MAKTX.
    IT_OUT-WERKS = IT_MARC-WERKS.
    IF IT_MARC-FLAG_UI = 'U'.
      IT_OUT-ERNAM = IT_MARC-USERNAME.
    ENDIF.
    APPEND IT_OUT.
    CLEAR IT_OUT.
ENDLOOP.
ENDFORM.                    "do_data
*SELECT AMATNR BMAKTX INTO CORRESPONDING
*FIELDS OF FTP_ITEMDOC1 FROM MARA AS A JOIN MAKT AS B
*ON AMATNR = BMATNR WHERE A~ERSDA = l_ersda
*AND B~SPRAS = '1' . "代表为中文说明。
APPEND FTP_ITEMDOC1.
*******DEVK909212****************
*******添加RANGE*****************
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = FTP_ITEMDOC1-MATNR.
APPEND R_MATNR.
CLEAR FTP_ITEMDOC1.
*******DEVK909212****************
*ENDSELECT.
*******DEVK909212****************
****get WERKS information from MARC*******
*SELECT MATNR WERKS INTO TABLE IT_MARC
*FROM MARC
*WHERE MATNR IN R_MATNR.
*******DEVK909212****************
******DEVK909212****************
**MARK**************************
*LOOP AT FTP_ITEMDOC1 .
MOVE : FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR,
        FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR1,
        FTP_ITEMDOC1-MAKTX TO FTP_ITEMDOC-MAKTX.
APPEND FTP_ITEMDOC.
CLEAR FTP_ITEMDOC.
*ENDLOOP.
******DEVK909212****************
******DEVK909212***********************************
**根据IT_MARC中信息，往北京和福清的TABLE写数据*****
FORM do_ftp.
LOOP AT IT_MARC.
***福清的
    IF IT_MARC-WERKS = '1010' OR IT_MARC-WERKS = '1020'
       OR IT_MARC-WERKS = '1023' .
     READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
     MOVE : FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR,
        FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR1,
        FTP_ITEMDOC1-MAKTX TO FTP_FUQING-MAKTX.
      CLEAR IT_MAKT.
      READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
      MOVE : IT_MARC-MATNR TO FTP_FUQING-MATNR,
         IT_MARC-MATNR TO FTP_FUQING-MATNR1,
         IT_MAKT-MAKTX TO FTP_FUQING-MAKTX.
      APPEND FTP_FUQING.
      CLEAR FTP_FUQING.
    ENDIF.
***北京的
    IF IT_MARC-WERKS = '1041' OR IT_MARC-WERKS = '1042'.
     READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
     MOVE : FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR,
        FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR1,
        FTP_ITEMDOC1-MAKTX TO FTP_BEIJING-MAKTX.
      CLEAR IT_MAKT.
      READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
      MOVE : IT_MARC-MATNR TO FTP_BEIJING-MATNR,
             IT_MARC-MATNR TO FTP_BEIJING-MATNR1,
             IT_MAKT-MAKTX TO FTP_BEIJING-MAKTX.
      APPEND FTP_BEIJING.
      CLEAR FTP_BEIJING.
    ENDIF.
ENDLOOP.
****清楚重复的数据**********
SORT FTP_FUQING.
DELETE ADJACENT DUPLICATES FROM FTP_FUQING.
SORT FTP_BEIJING.
DELETE ADJACENT DUPLICATES FROM FTP_BEIJING.
***传送数据********
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_FUQING[].
FTP_WERKS = '1010'.
PERFORM ftp_work.
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_BEIJING[].
FTP_WERKS = '1041'.
PERFORM ftp_work.
******DEVK909212***********************************
ENDFORM.                    "do_ftp
*&      Form ftp_work
     把以前FTP的工作做一个FORM
*******DEVK909212**************************
FORM ftp_work.
*******DEVK909212**************************
CHECK FTP_ITEMDOC[] IS NOT INITIAL.
FTP function *****************************************************
DATA : HDL TYPE I,
         L_SLEN TYPE I ,
         ERROR,
         KEY TYPE I VALUE 26101957,
         DEST TYPE RFCDES-RFCDEST VALUE 'SAPFTPA'.
DATA: FTP_RESULT TYPE TABLE OF TEXT.
DATA: P_FILE TYPE RLGRAP-FILENAME.
DATA: L_USER(16) TYPE C VALUE 'SFIS',
        L_PWD(16) TYPE C VALUE 'SFIS',
        L_HOST(16) TYPE C VALUE '172.16.31.17'.
*******DEVK909212**************************
*****根据不同的工厂来抓FTP的信息
CALL FUNCTION 'Z_FTP_SFIS'
    EXPORTING
      BLART = 'S'
      WERKS = FTP_WERKS
    IMPORTING
      HOST = L_HOST
      USER1 = L_USER
      PASS1 = L_PWD.
*******DEVK909212**************************
CONCATENATE l_ersda '.KP' INTO P_FILE.
SET EXTENDED CHECK OFF.
ERROR = 0.
CHECK HDL IS INITIAL.
Connect to server
L_SLEN = STRLEN( L_PWD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = L_PWD
      SOURCELEN   = L_SLEN
      KEY         = KEY
    IMPORTING
      DESTINATION = L_PWD.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
   EXPORTING
     TEXT = 'Connect to FTP Server'.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = L_USER
      PASSWORD        = L_PWD
      HOST            = L_HOST
      RFC_DESTINATION = DEST
    IMPORTING
      HANDLE          = HDL
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
    MOVE: 'B' TO WA_ZMSGTA-BLART,
          l_ersda TO WA_ZMSGTA-REFNUMBER,
          SY-MSGTY TO WA_ZMSGTA-MSGTY,
          'MARA' TO WA_ZMSGTA-TBMA_VAL.
    EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                SY-MSGV4 WA_ZMSGTA-MSE1.
    ERROR_MSG_UPDATA WA_ZMSGTA.
    EXIT.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = HDL
      COMMAND       = 'ascii'
    TABLES
      DATA          = FTP_RESULT
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3.
IF SY-SUBRC <> 0.
    EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                SY-MSGV4 WA_ZMSGTA-MSE1.
    MOVE: 'B' TO WA_ZMSGTA-BLART,
          l_ersda TO WA_ZMSGTA-REFNUMBER,
          SY-MSGTY TO WA_ZMSGTA-MSGTY,
          'MARA' TO WA_ZMSGTA-TBMA_VAL.
    ERROR_MSG_UPDATA WA_ZMSGTA.
    EXIT.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = P_FILE
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = FTP_ITEMDOC
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                SY-MSGV4 WA_ZMSGTA-MSE1.
    MOVE: 'B' TO WA_ZMSGTA-BLART,
          l_ersda TO WA_ZMSGTA-REFNUMBER,
          SY-MSGTY TO WA_ZMSGTA-MSGTY,
          'MARA' TO WA_ZMSGTA-TBMA_VAL.
    ERROR_MSG_UPDATA WA_ZMSGTA.
    EXIT.
ENDIF.
*******DEVK909212**************************
*******CLOSE FTP******************
CHECK NOT HDL IS INITIAL.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      DESTINATION = DEST
    EXCEPTIONS
      OTHERS      = 1.
CLEAR HDL.
ENDFORM.                    "ftp_work
*******DEVK909212**************************
FORM DISPLAY_ALV .
*-- PREPARE ALV DATA
PERFORM EVENTTAB_BUILD USING GT_EVENTS[].
PERFORM COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
*-- LAYOUT SETTING
PERFORM PREPARE_ALV_FIELD USING GT_FIELDCAT[].
*-- ALV DISPLAY
PERFORM CALL_REUSE_ALV_GRID_DISPLAY.
ENDFORM.                    " display_alv
*&      Form eventtab_build
      text
     -->P_GT_EVENTS[] text
FORM EVENTTAB_BUILD USING PT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = PT_EVENTS.
READ TABLE PT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    LS_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY PT_EVENTS FROM LS_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM.                    " eventtab_build
*&      Form comment_build
      text
     -->P_GT_LIST_TOP_OF_PAGE[] text
FORM COMMENT_BUILD USING PT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
        L_DATE(30),
        l_v_BWKEY like T001W-BWKEY, "Valuation area
        l_v_BUKRS like T001K-BUKRS. "Firm/Company
Listenerschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
select single BWKEY
   into l_v_BWKEY
   from t001w
   where WERKS IN s_WERKS.
select single BUKRS
   into l_v_BUKRS
   from t001k
   where BWKEY = l_v_BWKEY.
SELECT SINGLE butxt INTO LS_LINE-INFO
    FROM t001
   WHERE bukrs = l_v_BUKRS.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '报表名称：'.
LS_LINE-INFO = SY-TITLE.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印日期：'.
WRITE SY-DATUM TO LS_LINE-INFO.
ls_line-info = sy-datum.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印時間：'.
WRITE SY-UZEIT TO LS_LINE-INFO.
ls_line-info = sy-uzeit.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '使用者：'.
LS_LINE-INFO = SY-UNAME.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
ENDFORM.                    " comment_build
*&      Form prepare_alv_field
      text
     -->P_GT_FIELDCAT[] text
FORM PREPARE_ALV_FIELD USING P_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_LINE TYPE SLIS_FIELDCAT_ALV.
*-- DEFINE MARCO
DEFINE APPEND_ALV_FIELD.
    CLEAR LS_LINE.
    LS_LINE-FIELDNAME = &1.
    LS_LINE-TABNAME = &2.
    LS_LINE-REPTEXT_DDIC = &3.
    LS_LINE-SELTEXT_L = &3.
    LS_LINE-SELTEXT_M = &3.
    LS_LINE-SELTEXT_S = &3.
    LS_LINE-QFIELDNAME = &4.
    LS_LINE-QTABNAME = &5.
    LS_LINE-NO_OUT    = &6.
    LS_LINE-NO_ZERO   = &7.
    LS_LINE-OUTPUTLEN = &8.
    APPEND LS_LINE TO P_FIELDCAT.
END-OF-DEFINITION.
APPEND_ALV_FIELD: 'MATNR' 'IT_OUT' '料号'
                  'O' 'X' ''.
APPEND_ALV_FIELD: 'WERKS' 'IT_OUT' '工厂'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MTART' 'IT_OUT' 'MTyp'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MEINS' 'IT_OUT' 'BUn'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKL' 'IT_OUT' '物料组\分群码'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKX' 'IT_OUT' '物料描述'
                    'O' 'X' ''.
APPEND_ALV_FIELD: 'PSTAT' 'IT_OUT' '维护状态'
                    'O' 'X' ''.
APPEND_ALV_FIELD: 'BRGEW' 'IT_OUT' '毛重'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'NTGEW' 'IT_OUT' '净重'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'GEWEI' 'IT_OUT' 'WUn'
                  'O' 'X' ''.
APPEND_ALV_FIELD: 'FERTH' 'IT_OUT' '对外机种名'
                 'O' 'X' ''.
APPEND_ALV_FIELD: 'KZUMW' 'IT_OUT' '高关税标识'
               'O' 'X' ''.
APPEND_ALV_FIELD: 'ERNAM' 'IT_OUT' '创建者'
             'O' 'X' ''.
APPEND_ALV_FIELD: 'ERSDA' 'IT_OUT' '创建日期'
          'O' 'X' ''.
ENDFORM.                    " prepare_alv_field
*&      Form call_reuse_alv_grid_display
      text
--> p1        text
<-- p2        text
FORM CALL_REUSE_ALV_GRID_DISPLAY .
gs_layout-f2code              = 'DISPLAY'.
gs_print-no_print_listinfos   = 'X'.
gs_layout-colwidth_optimize   = 'X'.       "列宽度自动根据内容优化
gs_layout-f2code              = '&ETA'.    "double check弹出详细信息
gs_layout-zebra               = 'X'.       "清单条纹显示
gs_layout-no_vline            = ''.        "是否显示列间隔线
gs_layout-box_fieldname       = ''.        "是否显示checkbox
gs_layout-confirmation_prompt = ''.        "推出清单是否提示
gs_layout-detail_titlebar     = '详细信息'."详细清单的标题
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM                = SY-CPROG
      I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
     I_CALLBACK_PF_STATUS_SET          = 'ALV_PF_STATUS'
     I_CALLBACK_USER_COMMAND           = 'ALV_USER_COMMAND'
     I_CALLBACK_TOP_OF_PAGE            = GT_LIST_TOP_OF_PAGE[]
      IT_FIELDCAT                       = GT_FIELDCAT[]
      IT_EVENTS                         = GT_EVENTS[]
      I_STRUCTURE_NAME                  = 'IT_OUT'
      I_SAVE                            = 'A'
      IS_LAYOUT                         = GS_LAYOUT
      IS_PRINT                          = GS_PRINT
    TABLES
      T_OUTTAB                          = IT_OUT
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " call_reuse_alv_grid_display
*&      Form PREPARE_ALV_FIELD
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.                    "TOP_OF_PAGE

Hi,
Please check your field catalog and refer field names once again.
Check spelling, or Check strucutre properly.
There are something wrong in your catalog definition
aRs.

Why can't I open file that I saved 'save as'? When I go to use the file, it does not allow me to use???

I have Adobe X.

Hi jgrubbs760,
Do you get an error message when you try to open the file? Do other files open for you?
Please provide a little more information about what's happening, and we'll try to get this sorted out.
Best,
Sara

Why when I save an Illustrator CC file as PDF, I get a blank PDF file?

Hello - I recently migrated to Illustrator CC and have a problem saving my files as PDF. When I save as PDF, a blank file is created, that tells me the following message: "Questo le Adobe® Illustrator® è stato salvato senza contenuto PDF. Per inserirlo o aprirlo in altre applicazioni, occorre salvarlo di nuovo da Adobe Illustrator con l'opzione Crea le compatibile con formato PDF attivata. Questa opzione si trova nella nestra di dialogo per il formato Illustrator nativo, quando si salva un le Adobe Illustrator con il comando Salva con nome." that in english would be something like: "This AI file has been saved without PDF content. In order to import it or open it with other applications, you must save it again from AI checking the "create PDF compatible format". This option is in the dialog panel for native AI format...". I have always saved as PDF for the printer when I used previous AI versions with no problem, but now the same file gives me this problem with AI CC. I tried to save as PDF other new files, but the result is always the same, whatever file - whatever PDF settings I choose - whatever name I give - whatever way I save the AI file (with or without the PDF compatible file option). Can somebody help me? Thanks!

John,
You may try the following list, or it may be one for Creative Cloud support (all Creative Cloud customer service issues),
http://helpx.adobe.com/x-productkb/global/service-ccm.html
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Saving CS5.5 files using CS6

Hey there,
I've just installed CS6 and I'm running into the same problem I did when I upgraded to 5.5 at the time. I'm running into 3 problems.
1. The files I created using CS5.5, aren't automatically recognized as CS6 files. For instance, an InDesign 5.5 file has a white 'note' icon. When I force the file to be opened with InDesign 6 by default, the icon changes to a white note with a tiny InDesign icon in it, instead of a full CS6 icon:
2. But that's not the most annoying thing. When I open up a CS5.5 file in CS6, it doesn't remember it's location. So when I save it, it treats the file as a new file and I have to browse back into my filing structure to find the original file location and overwrite that. It marks it as [converted] in the file name when I open it. Maybe that has something to do with it?
I just noticed it does the same thing with my Photoshop files.
3. I also noticed that, although I uninstalled 5.5 after installing 6, that the old 5.5 folders are still in the Adobe folder. Does that have something to do with it, maybe?
Do you have a solution or this perhaps?
Thanks!
Janet

Thanks for the quick answer! Ok, if that's what it is, a bit annoying, I'll live with it . I'd just like my icons to appear as they should. I reinstalled CS5.5 but that didn't do it, so I'm uninstalling bot versions now - what do you suggest? Installing CS5.5 first and then CS6 - leaving CS5.5 running on my computer? In that case, do I have to set the files to 'open with CS6' as default program by right-clicking a file and choose open with CS6? Or is there another way to have files opening with CS6 by default (thus not messing up the icons)?
Or will just installing CS6 do the icon trick when everything is uninstalled?
Thanks!
Janet

Object reference not set to an instance of an object error when generating a schema using flat file schema wizard.

I have a csv file that I need to generate a schema for. I am trying to generate a schema using flat file schema wizard but I keep getting "Object reference not set to an instance of an object." error when I am clicking on the Next button after
specifying properties of the child elements on the wizard. At the end I get schema file generated but it contains an empty root record with no child elements.
I thought may be this is because I didn't have my project checked out from the Visual SourceSafe db first but I tried again with the project checked out and got the same error.
I also tried creating a brand new project and generating a schema for it but got the same error.
I am not sure what is causing Null Reference exception to be thrown and there is nothing in the Windows event log that would tell me more about the problem.
I am using Visual Studio 2008 for my BizTalk development.
I would appreciate if some has any insides on this issue.

Hi,
To test your environment, create a new BizTalk project outside of source control.
Create a simple csv file on the file system.
Name,City,State
Bob,New York,NY
Use the Flat file schema Wizard to create the flat file schema from your simple csv instance.
Validate the schema.
Test the schema using your csv instance.
This will help you determine if everything is ok with you environment.
Thanks,
William

How to save adobe Premiere CS6 files in CS5.5?

I have Adobe Premiere CS6 installed in my PC but my college Adobe version is cs5.5..so how can i save CS6 files into CS5.5?? i have checked a few forums but couldnt find a solution!!

http://translate.google.ru/translate?sl=ru&tl=en&js=n&prev=_t&hl=ru&ie=UTF-8&eotf=1&u=http %3A%2F%2Fwww.efxi.ru%2Fmore%2Fpremiere_pro_cs6_open_project.html

Save each page of a multi-page document as a separate file using spawned file names with javascript

Hello
We are currently changing our hard-copy personnel files and converting them to pdf files. We have scanned the entire file into one multi-page document.
I am wanting to save each page (or groups of pages) as separate files.
In order to facilitate this, I have duplicated field names--such as FirstName, LastName, EmpNo on each page. This information should be static for the entire file.
However--I also need information that will change for each individual "page" or document--such as TypeOfDoc, Date, etc. I have used the Spawn fields using the overlay method on each of the pages in the document. Then I went in and filled in the information for each page of the document--such as TypeOfDoc, DateOfDoc.
Now I want to save each page of the document as a separate file using the field names as the file name.
I first created an action that would split all the pages into separate files and save them into a folder.
Then I want to save each file as a specific file name based on the information in the fields.
My problem is obtaining the name of the spawned field name. The rest of the field names I am not having a problem with.
This is what I have so far to name the file.
// Get the field value
var oPage = this.pageNum;
var fn = getField("P" + oPage + ".TEMPLATE.DateOfDoc").valueAsString + getField("FirstName").valueAsString + "-" + getField("LastName").valueAsString;
// Specify the folder
var fldr = "/n/Personnel/ScannedDocuments/NAMEDPAAS/";
// Determine the full path
var fp = fldr + fn +".pdf";
// Save the file
myTrustedSpecialTaskFunc(this, fp);
This code is also accompanied with folder level scripts.
My problem is obtaining the name of the spawned fields using javascript. Each document has several pages--so I would like to obtain the field name through script.
I receive the following error.
TypeError: getField("P" + oPage + ".TEMPLATE.DATE") is null
I think this is due to the fact that I have extracted all the pages as individual files.
If I were to do the above, but not extract the pages first--I do not know how to just save one page at a time.
Please help. This is a massive project, and if we have to save each file individually, it will take a lot of time.
I am a beginner, so any assistance is appreciated.
Thank you

I am not understanding exactly where to put the curly brackets. I have tried two different ways, and still get the same error.
This is one way
var oPage = this.pageNum;
// Specify the folder
var fldr = "/n/Personnel/ScannedDocuments/NAMEDPAAS/";
// Determine the full path
var fp = fldr + fn +".pdf";
for (var i = 0; i < this.numPages; i++)
var fn = getField("P" + oPage + ".template.DateOfDoc").valueAsString + getField("FirstName").valueAsString + "-" + getField("LastName").valueAsString;
{this.extractPages({
nStart: i,
cPath : fldr + fn + ".pdf"
The other is this
var oPage = this.pageNum;
// Specify the folder
var fldr = "/n/Personnel/ScannedDocuments/NAMEDPAAS/";
// Determine the full path
var fp = fldr + fn +".pdf";
for (var i = 0; i < this.numPages; i++)
var fn = getField("P" + oPage + ".template.DateOfDoc").valueAsString + getField("FirstName").valueAsString + "-" + getField("LastName").valueAsString;
this.extractPages({
nStart: i,
cPath : fldr + fn + ".pdf"
Thank you for your help.

Temporary file appear when I save Al or pdf files (illlustrator CS, CS2 on Windows XP)

HELP! Does anyone know why? When I save Al files from adobe illustrator on windows XP, temporary files are created in the same directorys as the saved file. Temp files has data within the file, but the saved file has no data 0kb. Does anyone have any ideas how to fix this problem? thanks so much!

I apologize for not having an answer. I just wanted to chime in and say that I am having the exact same issue. I have never had this before. It's happened ever since I had my hard drive replaced and Illustrator has been reinstalled, so I am assuming that it's a preference somewhere that I have missed?

Accessing CS1 files using CS6

Just Installed In Design CS6 on my Windows 7 PC. I am trying to access a file created using InDesiign CS1 and I am getting thrown out of the system. Is there any way to use an old file in CS6?

Ask in the ID forum. You probably will need to install some intermediate version as a trial at least to convert the files.
Mylenium

When i save files using CS6 files go white

Similar Messages

Maybe you are looking for