When i search in google enter does not work nor does pressing the search button
I open Firefox. Type something in the Google box, left click and nothing happens. I then press the search button and still nothing.
Can I go back to previous version of Firefox.
The latest said it was having issues with the Garmin communicator.
I found the answer just after posted this. Thanks to a user named CloudWalker. Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.
Similar Messages
-
My iPhone 4 started to blackout out of nowhere and it wont work only until I plugged my phone into the charger. It has been going on for several times in a day, where it just randomly blacks out. Do anyone know what is the problem and how do I exactly fix this? thanks
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new
Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/ -
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor: -
My macbook air does not start! I press the on key and nothing happens.
my macbook air does not start! I press the on key and nothing happens.
this morning when I took my macAir it would nt start and when I pluged it, there was no light indicating a charge.
I checked the charger on my wife's mcAir and it worked.
I plugged it back to mine and the orange light came.
since a few hours, the plug is on with the orange light on, and still I cannot start the computer. Nothing happens!
help!Try a SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
This process helps correct these power issues.
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity. -
IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?
If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock -
I bought IPROXIFY throught APP STORE and it does not work. I contacted the creator and he has not answered.
How can I get my money back? and please take him down of your page as we (users) think that we are buying products that worked backed up by MAC.
Looking forward for an answer in order to keep buying in APP StoreThis article may clear up some confusion you may have regarding third party developers and Apple.
The Mac App Store Discussion, what is it for? -
My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?
The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.
-
I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?
I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm. -
i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
Maybe you are looking for
-
Enhancement for changinf header of Workorder (IW31)
Hello Gurus, I am looking out for an exit/BADI for changing the header of work order (IW31) during creation of the same. I could find some of the exits but they doesn't change the header. Could anyone of you suggest some enhancemnet for the same. My
-
Error specifying spry xml data source?
I have been using Dreamweaver's Spry XML Data Sets without any trouble until I added the calendar YUI widget. After that I get an error message "no expected entity name for reference (65, 23)". Also nothing shows in the Bindings Panel. I have a Mac O
-
Conversion error with non-primitive types
I'm wondering if anyone else is seeing this problem or has a potential solution. The problem, in a nutshell: I have beans that use non-primitive types (Float instead of float) in the getters and setters. However I keep getting conversion error proble
-
I got a template from Template Moster. I am not very good with Adobe Flash CS4, i can just about edit text, thats it, i have been trying to find where the Links are to edit, by default all the pages are, for example: index.html index-1.html index-2.h
-
Error from Novell.Zenworks.MDStatusSender.dll ???
WS=XP_SP3_RUS ZCM AGENT= ZCM10.3.3 In the zmd-messages.log file i see this errors: [DEBUG] [08/18/2011 14:49:30.047] [1092] [ZenworksWindowsService] [37] [] [ModuleLoader] [] [Unexpected exception calling Instace property of module C:\Program Files\N