When I select 'Options' I am presented with an empty window; I have used FF from its inception migrating from Netscape. I am using FF 32.3.

When I select 'Options' from the tools menu the resultant box is completely empty I am using FF 32.3 on Windows 8.1 Pro 64-bit. I prefer the pull-down menu system.

hello, please try to disable the ghostery addon and see if you can still reproduce the issue then...
https://getsatisfaction.com/ghostery/topics/problem-with-firefox-32-firefox-option-is-not-displayed-when-ghostery-is-active-in-firefox-32

Similar Messages

On my home computer, when I transfer from my iTunes library to iTunes store, I'm presented with an empty window. Tool bar at the top of the page is in view and all it's 'drop-downs' function. Any ideas?

On my home computer, when I transfer from my iTunes library to the iTunes store I'm presented with a blank window. The tool bar is present and functional but regardless of what I do, the page remains blank. Any ideas?

Hey DDStoker,
It sounds like you may be experiencing issues with connecting to the iTunes Store. Try using the information in the following article to help you troubleshoot this issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

When starting up, Apple logo is present with loading bar underneath. No spinning wheel. After aprox 1 min the loading bar stops half way

When starting up, Apple logo is present with loading bar underneath. No spinning wheel. After aprox 1 min the loading bar stops half way and shuts down completely. Any advice appreciated.

Which model MacBook Pro do you have (e.g., "15-inch Late 2011") and which version of OS X are you running?
You may want to try resetting your SMC -> Intel-based Macs: Resetting the System Management Controller (SMC).
If no joy there, call back with th requested information.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

IPhoto 08 vsn 7.1.5 software issue. Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
Papasailor

YOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

My new iMac is not shipping with Lion installed. Will I be able to do a Migration from my PC to my iMac without installing Lion first?

My new iMac is not shipping with Lion installed. Will I be able to do a Migration from my PC to my new iMac? I only want to transfer photos and my music, currently on my PC (and on my iPod Touch & iPad).
Can anyone give me a list of steps to follow or let me know if Migration Assistant is available prior to Lion for PC to Mac?
Thank you so so so much!
-SweetDee

SweetDee,
I'd be VERY surprised if your machine was not shipping with Lion installed. However even if it doesn't when you initally install Lion it will launch into Setup Assistant, if you follow the prompts it will ask if you are migrating from another machine. You can use Pondini's Lion Setup Assistant tips for help, look for the section(s) on MS Windows migration. Also I would strongly recommend bookmarking and studying the following sites:
Switch 101
Mac 101
Find Out How Video tutorials
In closing remember you have 90 days of free telephone support with AppleCare. If you run into trouble they will be happy to assist or if you have an Apple Store in your area you can book an appointment with a Genius and they can usually help you out.

Reference is lost when updating selection option

Hi all,
In my application, I need to update selection screen according to user input, like update dropdown list. Therefore, I write my coding at view event WDDOMODIFYVIEW to ensure my method UpdateScreen is called at every roundtrip. Everything runs OK except when I click sign/option and choose any sign of selection option following dump occurs:
The following error text was processed in the system ICX : Access via 'NULL' object reference not possible.
The error occurred on the application server pwdf4646_ICX_12 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_ELEMENT~SET_ATTRIBUTE of program CL_WDR_CONTEXT_ELEMENT========CP
Method: SET_SIGN of program CL_WDR_SELECT_OPTIONS=========CP
Method: ON_SIGN_OPTION_LEAVE of program CL_WDR_SELECT_OPTIONS=========CP
Method: ONACTIONON_ENTRY_SELECTED of program /1BCWDY/ALMK9CLI947HVDFYUZV5==CP
Method: ONACTIONON_ENTRY_SELECTED of program /1BCWDY/ALMK9CLI947HVDFYUZV5==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/ALMK9CLI947HVDFYUZV5==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
It losts ref since I call if_wd_select_options~upd_selection_field before choosing sign. If user clicks sign/option, there's no need to update selection screen because no user input changes. But how can I judge this?

Please let me comment more since no attachment can be uploaded. Following are key steps I do:
1) Build selection screen of two select options with this:
lr_range = lr_selopt->create_range_table( i_typename = 'CRMT_PROCESS_TYPE' ).
lr_selopt->add_selection_field(
    i_id                       = 'ACT_PROCTYPE'
    it_result                  = lr_range
    i_description              = 'Transaction Type'
lr_range = lr_selopt->create_range_table( i_typename = 'CRMT_ACTIVITY_CATEGORY' ).
lr_selopt->add_selection_field(
    i_id                          = 'ACT_CAT'
    it_result                     = lr_range
    i_value_help_structure_field = 'CATEGORY'
2) At method WDDOMODIFYVIEW, I update the description for example:
lr_range = lr_selopt->create_range_table( i_typename = 'CRMT_PROCESS_TYPE' ).
lr_selopt->upd_selection_field(
    i_id                       = 'ACT_PROCTYPE'
    it_result                  = lr_range
    i_description              = 'New Transaction Type'
Then, if I click the sign button before select option and choose a sign, it gets dump.
I know the calling of upd_selection_field interferes something, but I have to update screen in order to complying with user input.

Select-option in module pool with table Control

HI,
How to use the select-option in Module Pool and how Can i use the Table control in it.
Can any body give me some Clues.
with rgds
Ranjith

Hi ..
PBO.
LOOP at <table contriol>
module --- Inside the module
DATA: g_uti TYPE REF TO cl_fobu_input_util.
if rollname <> space.
     CREATE OBJECT g_uti
       EXPORTING typename =rollname.
*....convert to external pattern
     CALL METHOD g_util->output_convert
       EXPORTING
         field_value_int = p_value                 " This is Tablecontrol-low
       IMPORTING
         field_value_ext = p_value.              " Retrun value for Low
ENDLOOP.
lly you have code in PAI
DATA: g_util_1 TYPE REF TO cl_fobu_input_util.
if rollname <> space.
     CREATE OBJECT g_util_1
       EXPORTING typename = rollname.
*....convert to internal pattern
     CALL METHOD g_util_1->input_convert
       EXPORTING
         field_value_ext   = p_value
       IMPORTING
         field_value_int_c = p_value.
The above code should be written for tablecontrol-high aswell..
you can also refer: Inlcude LSE16NF10 line no 341 & 434 (SE16n)
Nag

Unable to handle event --Select-Options as Dropdown filled with Value Set

Hi all,
I seem to be having no luck with this problem. I have searched enough, and not come across any relevant documentation either.
I am using a select options field made as a dropdown and am populating the dropdown values using the Value Set where i can provide a table of key values versus descriptions. Additionaly, I have hidden the standard buttons -- CANCEL, CHECK, RESET, EXECUTE.
This appears exactly like a dropdown, just as desired.
However, no event seems to be triggered whenever I select any value from this dropdown field.
The interface controller of the select-options component offers 5 events and I have tried creating event handlers for all of these; with no success. With no event to track, I am frozen.
I know I may be able to create such a dropdown list without using select-options either; but the point is if this functionality is provided by select-options, there should be a way of using it.
I have browsed through the helper class as well as the interface controller, but am not getting a clue.
The bottomline is, with my current situation, how can i track the on-click or on-change kind of event?
Could anybody melt the ice?
Thanks.

I went to the source code of the select-options class (CL_WDR_SELECT_OPTIONS) and found the method where the UI elements are rendered (RENDER_SELECTION_SCREEN_ITEM). In the spot where the DDLB is rendered, there is simply no code to register any events for the DDLB. So it doesn't appear that there is any intention to allow you to handle such events from the DDLB.
=> add the dropdown as dropdownbykey
        prefix_id mc_dropdown_id i_field-m_id id.
        concatenate i_field-m_id '.VALUE' into path.
        lr_dropdown = cl_wd_dropdown_by_key=>new_dropdown_by_key(
                        id                = id
                        bind_selected_key = path
                        read_only         = i_field-m_read_only
                        state             = state
                        explanation       = i_field-m_explanation
                        tooltip           = i_field-m_tooltip
                        view              = lr_cur_container->view ).
        lr_label_low->set_label_for( id ).
        lr_matrix_data = cl_wd_matrix_data=>new_matrix_data( element = lr_dropdown width = '1%' ).
        lr_dropdown->set_layout_data( lr_matrix_data ).
        lr_cur_container->add_child( lr_dropdown ).

I have a macbook 2.1 with osx10.6.8 and want to wipe it clean and migrate from my macbook pro with the same osx..is it possible to do?

I have an older macbook 2.1 intel OSX 10.6.8 that I want to wipe clean and then migrate from my macbbok pro with OSX10.6.8 to the older macbook, is it possible ,how would I do it..especially how do I wipe clean the older macbook?

Connecting to a TV is no different than connecting to any other external display. It's possible that there's a problem with the mini dvi port on the macbook r that you have bad adapters. You might try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Does the Macbook recognize that there's an external display connected when you look at the Display preference pane?

Problem using SELECT-OPTIONS in an InfoSet with a field of data type UNIT.

I have created a simple InfoSet that links MARA with MARM. In the 'Selections' section of the InfoSet I have a variable named 'ZMEINH' defined as
Description: UOM
Selection Text: UOM
Format FOR: MARM-MEINH
EXTRAS: DEFAULT 'PAC' OPTION EQ SIGN I.
When I ran a query to allow selections on the MEINH field, instead of 'PAC' being the default, there was "***" showing in the UOM selection and if I attempted to execute the query it gave me a message that "Unit *** is not created in languague EN'. If I overide the "***" and enter 'PAC', I get the list of records that I expect.
I assume this is because MEINH has a data type of "UNIT".
How can I do a conversion so I can define a default value 'PAC' for MARM-MEINH in the infoSet that will carry through to any queries I created.
Thank you very much for any help.
Richard Salisbury

Thank you both for you help!
In our T006 there actually is a PAC and not a PAK. The T006A had as DE-PAK though.
I had this same type of language problem when trying to match an "order type". German is the "base" language in our system so maybe that means that raw data is stored with the German constant?
Anyway, I changed it to PAK and it works. When under a time schedule, that is what counts.
Thank you again for the quick response!
Richard Salisbury

When i select option to share apps

I received a message that I'm only allowed five- and i need to get rid of one. To the best of my knowledge, I only have two laptops (and the other one hasn't had settings changed to share). Anyone know what I need to do??
Really appreciate your help! This is my first @ using this forum.
Kenneth

You'll have to log in to your iTunes Store account. On the Account Information page you will see how many computers are authorized for use with your account. If you already have five then you will have to deauthorize all of them re-authorize the ones that you want to authorize with your account. (See screen shot below.)

When I select a mail message, there isn't a window that shows the thread and message...That window is gone. I only have the inbox window and the left sidebar with my mailboxes, but no "preview window" that shows the message selected in the inbox window

Any help would be greatly appreciated...I just want to reset mail to the default UI and I can't even figure out how to do that. Any help would be greatly appreciated..I have no idea how I messed this up!

Actually there's no bar/dot. I think that's for a previous version... I'll include a screenshot:
As you can see theres no "bar" at the bottom of the window...help?!

When I select the firefox icon to open the brower, the round cursor is flashing and jumping instead of twirling steadily like it used to. What is wrong?

I'm not sure how to tell which Firefox version I have, but it was running smoothly before. Now when I click the Firefox icon in the task bar, to open the browser, the round cursor jumps and flicks on and off. Firefox does come on, but it seems like something is wrong. What is wrong that it is doing this?

That is is always a problem when you are using multiple profiles and Firefox isn't running.
It might work if no profile is selected (i.e. marked as Default=1 in profiles.ini).<br />
You can use desktop shortcut that open with a specific profile (-P "profile").<br />
There is also a setting in the Profile Manager (Don't ask at startup).

When I launch the iPhone 4 presents the iTunes icon and I have to restore.

Good evening, from one month when I turn off my iPhone 4 and the power back up, the display shows the icon if iTunes and I use it to restore. I sent it in for service 2 times and I was told that the problem does not occur and that second diagnostic test works like it should. Obviously I have restored several times without backup but the problem persists. What do you advise me? thank you! translated with google translate

Ava8c wrote:
I already restored like new and the problem remains.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
iPhone User Guide
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

When I select 'My Ebay' Firefox grinds to a halt and I have to end it via Windows Task Manager - no problem in I.E. Solution?

same as https://support.mozilla.org/en-US/questions/956448?esab=a&as=aaq
tried solution without success

I get the feeling that you think I'm a developer or a Mozilla employee. I'm not. The people that answer questions here are users just like you, volunteering their time.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.

When I select 'Options' I am presented with an empty window; I have used FF from its inception migrating from Netscape. I am using FF 32.3.

Similar Messages

Maybe you are looking for