When I select the "Firefox" tab or Bookmarks tab and the options are displayed they begin dissappearing and reappearing almost like they are blinking.
It is difficult to navigate though my bookmarks due to the fact that they keep disappearing and reappearing. The same goes for any kind of button that gives me options to choose from. "Most Visited", the Firefox button on the top-left of the browser, etc.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Similar Messages
-
When I type I cannot add text when I select the text area and double click. Why?
When I type I cannot add text when I select the text area and double click. Why?
Premiere Elements 11 trial version for macMac computer photos uploaded to the timeline just finetrying to make a new title, streaming or in a framedouble clicked on the text in the box and nothing shows up when I type on my keyboard. I can delete the words that are there but not type in new ones. I selected the type and size, etc.
Thanks if you can figure it out. I gave up!
I may just un-install it all together if I can't get to work.Joanne
Date: Thu, 9 May 2013 17:59:08 -0700
From: [email protected]
To: [email protected]
Subject: When I type I cannot add text when I select the text area and double click. Why?
Re: When I type I cannot add text when I select the text area and double click. Why?
created by A.T. Romano in Premiere Elements - View the full discussion
Joanne Murray J2 What version of Premiere Elements are you using and on what operating system (including 32 or 64 bit) is your Premiere Elements installed? Forgive the questions if you have been there and done that, but I do not want to take anything for granted that might hinder a speedy resolution to your issue. Are you opening an already created title that is sitting on the Timeline in order to edit it in the Titler or are you trying to create a new Title (Default Text or other)? Do you know how to work with the Selection Tool and Type Tool in the Titler? Once I know what version of Premiere Elements that you are using, I will give you specific how to details. Thanks. ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5307494#5307494
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5307494#5307494
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5307494#5307494. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I fix this? I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work. My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should. Any advise would be appreciated.
See Grouping tracks into albums.
tt2 -
i have seen the new version in the tutorial but thats not the version i have.
Make sure that you install Firefox properly.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.
* https://support.mozilla.com/kb/Installing+Firefox+on+Mac
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X -
A new tab will not open when i select the division symbol
when i select the division symbol at the end of my tabs a new tab no longer opens... it has done previously... how do i get this functionality restored?
Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.
-
I am using microsoft outlook for email on latest version of firefox. In the applications window the only selection for outlook is mailto. When I select the envelope it takes me to outlook, however the first page is a mailto page with a link to my home page. I have to close that and get to my email page. How can I skip the mailto and go right to the outlook inbox page? Thank you.
I may have made a mistaken assumption that you were using Outlook.com (online webmail). If you are using Microsoft Office Outlook, then you actually would need an add-on to put a button for that program on the toolbar. I'm not sure if there is one specific to Outlook, but there is an extension named Custom Buttons that can be tweaked to do a wide range of things.
* https://addons.mozilla.org/firefox/addon/custom-buttons/
* forum for getting help with the add-on: http://custombuttons.sourceforge.net/forum/
But... I 'm not sure it's worth the effort because you usually can switch between Firefox and Outlook pretty quickly using the Windows Task Bar or Alt+Tab (keep holding Alt after you release Tab to see all the open windows and then Tab to the one you want). -
When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation. -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
I am having a problem partitioning an external hard drive with data in it.
When I select the partition, everything is grayed out. I can't add a a partition for some reason. When I asked this question to other people, they told me to select my partition "io" to do it from there.
As you can see, I can't seem to partition it form there either. I ran the Verify Disk utility but the volume came out okay.
Any ideas as to what the problem would be?
Thanks!
LuisSelect the main hard drive entry (topmost one.) Click on the Partition tab. Shrink the existing partition by grabbing the sizing gadget in the bottom right corner and pushing up until you free up enough space for your second partition. Be sure you do not shrink to less than the space currently occupied by your files. Click on the Add[+] button to create a new partition in the free space. Click on the Apply button and wait until the partitioning is completed.
-
When I select the file to export from pdf to word, thens click the Export button, nothing happens.
When I select the file to export from pdf to word, thens click the Export button, nothing happens.
Firefox 19 was just released. You may want to consider upgrading, then trying again.
Glad to hear IE worked though!
-David -
Al the details are in the question: I want all new windows to open in tabs but they dont, even after I have selected the option " Open new windows in new tab instead"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
I have no sound on my iMac. When I select the sound keys on the upper row of my keyboard or select 'output devices' tab in System Preferences, it says "no output devices found". Any idea where I am not looking to get sound back?
Thank you for your responses. I found the 'sound' icon in the menu bar and found it was turned down low. I adjusted the sound there and this worked; however, I'm not sure why this didn't show in my System Preferences or why I couldn't adjust the sound from the keyboard. Those function keys basically became un-usable for me. Thank you again!
-
I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?
hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
Sales order printout of third party process
Can I print the Sales order for 3 party items after saving? or I have to wait till the PREQ generated from Sales order is converted into PO, then it possible to take printout?
-
Can't use internet with bluetooth connection between iPhone and macbook
My iPhone and my macbook both show that I have a successful bluetooth connection, but I can't use the internet on my macbook. What might be the problem?
-
Hi Experts, From transaction "FK10N" which just displays vendor balances. I have gone into a particular freight vendor. I want to see what cost centre & sold-to the freight costs have been posted to. 1St screen will give me the total breakdown of the
-
I want to learn BW from my friends tell me useful for crm consultants,
Iam new to the sap . iam lerning sap Crm i have some best practices downloaded from from sap service market plce using this i want to practice CRM tell me the way of practice with use of best Practices. I want to lern SAP BW from my friends also
-
Hello, I currently create a small Wi-Fi network from my Mac, however, I need it to be a "closed network", like the option on AirPort WAPs. Is there a way to do this with Lion or a 3rd party utility that would allow me to do this? Thanks!