When i send a contact by email the email is received but without the contact info.

Can anyone help. it seems to work ok when i MMS but not on the email. the email is received but does not contain the contact info.

I have the same problem.  Sought to insert a pdf into Apple Mail after editing a form pdf and only the blank form shows.  I didn't use Preview to generate the form, just Acrobat.  And, the filled in form inserts perfectly into an email when I use Outlook for Mac.  Problem only with Apple Mail.
HELP!!

Similar Messages

  • Whenever I reply to an e-mail the window comes up but without the paper airplane in the top left corner.  The only way to send the reply is to close it and save as a draft.  Then I can pull it up from Drafts and it has the airplane on it.

    Whenever I reply to an e-mail the window comes up but without the paper airplane in the top left corner.  The only way to send the reply is to close it and save as a draft.  Then I can pull it up from Drafts and it has the airplane on it.

    Launch Mail.
    Click "New Message" in the Toolbar.
    When the new message window opens up, click "View" menu in the menu bar.
    Select "Show Toolbar" from the dropdown.
    or
    Select "Customize Toolbar from the dropdown.
    When the Customize Toolbar sheet drops down, drag  "Send" button
    or  drag "default set" into the toolbar.
    Click "Done".

  • All messages will only show the latest message received, but not the rest of the conversation until I send a response

    I'm having some issues with my messages, text and iMessage. When I receive a message it will only show the last one sent from that person, even if they have sent me multiple texts. I am then not able to see the rest of the conversation until I send a response back. Even then the message takes longer to send than when messages is working properly. I've tried resetting and restarting the phone and it is still doing the same thing. It has done this in the past and restarting the phone usually worked, but I recently did the latest software update and it is now doing this consistently. Anyone have any similar issues or ideas to maybe try and fix it?

    Hey Olivia,
    If you are having an issue with your iPhone only showing the most recent message of a conversation in the Messages application, and you have already tried restarting and resetting the iPhone, the next thing to try would be to back up any data on the iPhone, erase it and set it up as a new device. See this article for directions -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • How do I duplicate a spreadsheet keeping all the layout and formulae but without the data?

    I have a good spreadsheet set up. I wish to start a new set of 'books' using the same layout and formula set up but with no data. Other than duplicating the spread sheet and manually deleting the data while preserving the formulae how can I do this?

    Hi Frasercat,
    You could have a table where you input values, and another table with formulae that refer to the input table. Save the original document, then duplicate. Delete the values in the input table. You could Save As Template for future use.
    Regards,
    Ian.

  • When I send a document for signature, two emails are sent to my client and myself.  How do I make sure only one is sent?

    When I send a document for signature, two emails are sent to my client and myself. How do I make sure only one is sent?

    Hi Mark,
    I checked your account at the backend and found many transactions sent out.
    In order to narrow down the issue and search we need to know the specific transaction detail for which you faced this issue.
    1. Signers email address
    2. Senders email address
    3.Name of the document
    4. Date it was sent.
    Do not post the information here. Send me a private message
    Also let me know which 2 mails did you receive? Could you please share the subject line for the same.
    Regards,
    Rave

  • I reset network settings on my iPhone. However now it looks as if my iPhone and iPad are no longer linked. They are both connected to my apple account but when I send an imessage from one it is not picked up by the other. What do I do?

    I reset network settings on my iPhone. However now it looks as if my iPhone and iPad are no longer linked. They are both connected to my apple account but when I send an imessage from one it is not picked up by the other. What do I do? If anyone can help it would be very much appreciated. Many thanks x

    Check Settings > Messages > Send & Receive on both your iPhone and your iPad to make sure that the following are all true:
    (1) you have selected the same Apple ID on both devices,
    (2) you have the same entries checked under "You can be reached by iMessage at:" on both devices,
    (3) you have the same entry checked under "Start new conversations from:" on both devices,
    and
    (4) that the entry checked in #3 is one of those checked in #2 on both devices.
    When you say it has affected your iCloud account, what effect has it had?

  • I have upgraded my pages in my ipad but i cant read it when i send it to my macpro? do i have to buy the apps for my imac? If i have to can I revert to the old one meaning the pages before the upgrading/

    i have upgraded my pages in my ipad but i cant read it when i send it to my macpro? do i have to buy the apps for my imac? If i have to can I revert to the old one meaning the pages before the upgrading?

    If you have iWork 09, then the latest version should be available for free in the Mac App Store. If you have the new version on your iPad, then you'll need the new version on your Mac as well. The whole point of the latest version is that you can access and edit your files equally on iPad/iPhone, Mac, and also through the iCloud website.

  • In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix?  Thx.

    In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix? 
    I also notice that each contact says iCloud in it twice, but when I go to iCloud.com, there are no duplicates either. Help..

    mdd770,
    Try Contacts>Preferences...>Accounts...remove {-}/re-add {+}your iCloud account.
    If that is not successful, follow the steps listed in iCloud: Troubleshooting iCloud Contacts.

  • Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

    Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

    Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share,  as I am facing real problem because of this...

  • When downloading from a Sony minidisc video camera, the picture is downloading but without sound.  Previously, it had downloaded successfully both sound and picture.  I have subsequently upgraded to Lion X (10.7.4).  Is there some problem with the driver?

    When downloading from a Sony minidisc video camera, the picture is downloading but without sound.  Previously, it had downloaded successfully both sound and picture.  I have subsequently upgraded to Lion X (10.7.4).  Is there some problem with the upgrade which is affecting the transfer?  Is there a way of resolving this?

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • When "Edit in Photoshop" in lightroom photoshop opens the picture but without the changes I made in lightroom

    when "Edit in Photoshop" in lightroom photoshop opens the picture but without the changes I made in lightroom
    Please help me

    Hi mariad91843143,
    To enable the non-destructive workflow and the powerful features of Photoshop CC, the RAW image will need to be opened into Photoshop whilst, in the meantime, keeping our Lightroom changes so that we can work on them later. Instead of using the ‘Edit in Adobe Photoshop’ option in Lightroom – CMD +E (Mac) or CTRL +E (PC) – the option ‘Open as Smart Object in Photoshop’ will be used.
    This is a very useful tutorial to understand how to manage the workflow between Photoshop and Lightroom Canon Professional Network - Lightroom & Photoshop CC workflow (Pt. 1): Smart Objects ....

  • When syncing iTunes reports "The iPod "name" cannot be synced. A duplicate file name was specified. ". the music is updated but all the sleeve imagary is not including deleting the existing images. How do I solve please?

    When syncing iTunes reports "The iPod “name” cannot be synced. A duplicate file name was specified. ". The music is updated but all the sleeve imagery is not including deleting the existing images. How do I solve please?

    Hello WGT52,
    It sounds like this error message is preventing you from syncing your content to the iPod. I would recommend the troubleshooting steps in the following article:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I can, I can't get my address book to snyc with my ipad2.  I'm using Outlook express 2004.  I followe the steps in itunes, but still no contacts.  Any suggestions?

    Can't get my address book to sync to IPAD2.  Using Outlook Express 2004.  I followed the steps in Itunes, but still not contacts.  Any suggestions?

    Mine is doing the exact same thing, and nobody on any of these threads has had any luck fixing it yet, so far as I can tell. iSync is worthless since it simply won't see the ipod and basically is not used at all now as .mac is done through its own preference window. What did work for me, and was quite easily done, was to just open your ipod through the finder and delete the vcard data in the contacts folder. Export your contacts from address book as a vcard to that contacts folder on your ipod, and it all works fine.
    Still won't sync...but at least this only takes a minute to do. I'd like to actually fix it though.

  • I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..

    I updated to ios5 on another computer because i was stuck on the recovery mode loop but now the problem is that when i try sync to my current one iphone does not show up or sync at all.. any ideas? gonna try uninstall right now..

    There is no way to consolidate iTunes accounts.
    Setting up an iPhone has never required creation of a new Apple ID.
    You've apparently purchased content with both Apple ID's.  Sign into the device with the correct Apple ID and sync the content.

Maybe you are looking for