When I send a mail using pages on my iPad, it sends as a PDF(attachment).

Is there any way I can send it as a normal mail ?

Hello Paul,
Thank you for contacting Apple Support Communities.
You can send Pages documents as a Pages, PDF, or Microsoft Word document. See this article to see how.
Pages for iOS (iPad): Send and receive documents in email messages
http://support.apple.com/kb/PH3564
Regards,
Jeff D.

Similar Messages

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad. Can anyone help me with this? Is there a setting I need to check?

Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

If I am using Pages on my iPad, am I able to link to places elsewhere in the document?

If I am using Pages on my iPad, am I able to link to places elsewhere in the document? I'm trying to set up a table of contents for my students and I was unsure if I could use the iPad version of pages to do this.

Look for Table of Contents, Bookmarks and Hyperlinks.
These are all available on the desktop version, I do not have an iPad version to determine how those are implemented there.
Peter

Send Invoice as PDF Attachment with variable Filename

Hello!
We got a requirement from one customer. We should send our invoices as PDF-Attachment via E-Mail but the attachment must have a variable filename. At the Moment we can send invoice as PDF-Attachment but only with a fix filename.
How can we change the filename in our Adobe Forms?
Best Regards
Markus

Hi Florian!
Answer 1:
    The original Name is Druckdaten.pdf
Answer 2:
     Our entry in NAST-NACHA = 1
Answer 3:
     I can implement some ABAP-Code
Here some Screenshots:
Configuration of printer E-MAIL:
Best regards
Markus

I have properly configurated my email accounts, however when I open the mail the page in blank and therefore I cannot see any mail nor send any mail, what is happening??

I have properly configurated my email accounts, however since yesterday when I open the mail page, the page is blank and I vannot send any mail nor read any mail.

Have you tried....
restart the device?
reset the device?
delete and re-add the accounts?

When I send PO to vendor, Attachements also to be sent along with that mail

Hi Guys,
Right now, when I release a PO or issue 'mail output' in message types and save it, it sends PO priview to vendor thru email.
I think its happening with config part which is done in NACE (custom message types...driver program...form routine).
Now the requirement is when PO sends to vendor, the documents which are attached to PO item also to be sent as attchments with that mail.
I have logic with me to get the documents of PO and to send them to vendor thru a seperate mail. But per requiremnt, it should happen only at the time of PO release.
Can somebody guide me how & where to place my logic in order to work it as mentioned above?
Points awaiting...

Hi,
If the email should be sent to vendor only when the PO is released, the simplest way to accomplish this would be using a simple workflow which sends an e-mail to vendor with the PO attachment for the event 'released' of the business object BUS2012.
Hope this helps.
Regards,
Hemanth

Sending Cheque as PDF attachment in Mail using F110.

Hi all,
We have a requirement to send the cheque as as PDF attachment in Mail while printing it through transaction F110.Mail has to be triggered when the payment run is done through F110.Is there any config setting to do this without doing any changes to Print program RFFOUS_C.
Thanks and Regards
Kiran

Hi,
check below link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/email%2bfrom%2bsap
Regards,
Madhu

Want to Send smartform as pdf attachment with a Email to some mail id

Hi ,
I want to send a smartform as a PDF attachment with a mail to a mail id. And I can send a mail with the PDF attachment.
But I am not able to open the PDF. It is throwing some error (Adobe reader could not open u2018fileu2019 because it is either not a supported file type or because the file has been damaged (for example , it was sent as an email attachment and was not correctly decoded)).
By debugging I come to know that the file which is generating is in some encoding format.
Please help me regard this. This is very urgent.
here is the code,
Main Program :
REPORT Ztest_report.
*--Top Include for Global Data Declarations.
INCLUDE ztest_report_top.
*--Form Include for Form Routines.
INCLUDE ztest_report_form.
START-OF-SELECTION.
START-OF-SELECTION.
*--Display data
Perform display_data.
END-OF-SELECTION.
Top declaration :
Internal table
DATA : i_otfdata TYPE tsfotf,          " Smart Forms: Table OTF
        i_tline TYPE TABLE OF tline WITH HEADER LINE,
        i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
        i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
        i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
        w_mailaddr TYPE ppfdmailad,
        w_mailtype TYPE so_escape,
        w_mailrecipient TYPE swotobjid,
        w_control TYPE ssfctrlop,
        w_compop TYPE ssfcompop,
        w_return TYPE ssfcrescl,
        wa_doc_chng TYPE sodocchgi1,
        w_data TYPE sodocchgi1,
        wa_buffer TYPE string, "To convert from 132 to 255
        wa_objhead TYPE soli_tab,
Variables declarations
        v_form_name TYPE rs38l_fnam,
        v_len_in LIKE sood-objlen,
        v_len_out LIKE sood-objlen,
        v_len_outn TYPE i,
        v_lines_txt TYPE i,
        v_lines_bin TYPE i.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-009.
PARAMETER:      p_bukrs TYPE bukrs OBLIGATORY,            "Company Code
                p_belnr TYPE belnr_d OBLIGATORY,          "Document No
                p_gjahr TYPE gjahr OBLIGATORY,            "document type
                p_mailid(50) TYPE c OBLIGATORY.
"Mail Id
SELECTION-SCREEN END OF BLOCK blk1.
Form Logic :
FORM display_data.
*Local Variable declaration
DATA: lc_fm TYPE rs38l_fnam,       "local variable to store the
        l_i_document_output_info TYPE ssfcrespd,
        l_i_struc_job_output_info TYPE ssfcrescl,
        l_i_struc_job_output_options TYPE ssfcrescl,
        i_lines TYPE TABLE OF tline WITH HEADER LINE,
        lv_job_output_info      TYPE ssfcrescl,
        lv_document_output_info TYPE ssfcrespd,
        lv_job_output_options   TYPE ssfcresop,
        lv_bin_filesize         LIKE sood-objlen.
Determine the smartform name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
            formname           = 'ZTEST_SMARTFORM'
       IMPORTING
            fm_name            = lc_fm
       EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_control-getotf = 'X'.
w_control-no_dialog = 'X'.
w_control-preview = space.
w_control-device = 'MAIL'.
Call the smartform and pass the selection screen parameter
CALL FUNCTION lc_fm
       EXPORTING
            control_parameters = w_control
            output_options     = w_compop
            user_settings      = 'X'
            t_bukrs            = p_bukrs
            t_belnr            = p_belnr
            t_gjahr            = p_gjahr
       IMPORTING
            job_output_info    = l_i_struc_job_output_info
       EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Moving the Smart Forms: Table OTF into an internal table
i_otfdata[] = l_i_struc_job_output_info-otfdata[].
CONVERT TO OTF TO PDF.
CALL FUNCTION 'CONVERT_OTF'
       EXPORTING
            format                = 'PDF'
            max_linewidth         = 132
       IMPORTING
            bin_filesize          = lv_bin_filesize
       TABLES
            otf                   = i_otfdata
            lines                 = i_lines
       EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            err_bad_otf           = 4
            OTHERS                = 5.
IF sy-batch EQ l_c_no.
To directly view the print-preview in PDF format
CALL FUNCTION 'SSFCOMP_PDF_PREVIEW'
       EXPORTING
            i_otf                    = i_otfdata
       EXCEPTIONS
            convert_otf_to_pdf_error = 1
            cntl_error               = 2
            OTHERS                   = 3.
For Sending the PDF file to a Mail ID.
LOOP AT i_lines.
   TRANSLATE i_lines USING '~'.
   CONCATENATE wa_buffer i_lines INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
   i_record = wa_buffer.
   APPEND i_record.
   SHIFT wa_buffer LEFT BY 255 PLACES.
   IF wa_buffer IS INITIAL.
     EXIT.
   ENDIF.
ENDDO.
DATA: BEGIN OF zlines OCCURS 0,
tline TYPE char255,
END OF zlines.
*Change the PDF format from 132 to 255.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
       EXPORTING
            transfer_bin                = 'X'
       TABLES
            content_in                  = i_lines
            content_out                 = zlines
       EXCEPTIONS
            err_line_width_src_too_long = 1
            err_line_width_dst_too_long = 2
            err_conv_failed             = 3
            OTHERS                      = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Attachment
REFRESH: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR wa_objhead.
i_objbin[] = zlines[].
Create Message Body Title and Description
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 2.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Attachment (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 2.
I_OBJPACK-DOC_TYPE = 'RAW'.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = p_mailid.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
Send new document with attachments via RFC
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            document_data              = wa_doc_chng
            put_in_outbox              = 'X'
            commit_work                = 'X'
       TABLES
            packing_list               = i_objpack
            object_header              = wa_objhead
            contents_bin               = i_objbin
            contents_txt               = i_objtxt
            receivers                  = i_reclist
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
IF sy-subrc <> 0.
    WRITE:/ 'Error When Sending the File', sy-subrc.
ELSE.
    WRITE:/ 'Mail sent'.
ENDIF.
ENDFORM.                    " display_data

hi,
i wrote a programm.for me it is working.i think it will help for u.
DATA: t_otfdata TYPE ssfcrescl,
      t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
      t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
     T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
      w_bin_filesize TYPE i,
      wa_ctrlop TYPE ssfctrlop,
      wa_outopt TYPE ssfcompop,
      WA_BUFFER TYPE STRING,          "To convert from 132 to 255
      WA_OBJHEAD TYPE SOLI_TAB,
      WA_DOC_CHNG TYPE SODOCCHGI1,
      W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
      V_LINES_TXT TYPE I,
      V_LINES_BIN TYPE I,
      nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSR_DEMO1'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = form_name
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = wa_ctrlop
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = wa_outopt
   USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            = t_otfdata
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
   FORMAT                      = 'PDF'
   MAX_LINEWIDTH               = 132
ARCHIVE_INDEX               = ' '
COPYNUMBER                  = 0
ASCII_BIDI_VIS2LOG          = ' '
PDF_DELETE_OTFTAB           = ' '
IMPORTING
   BIN_FILESIZE                = w_bin_filesize
BIN_FILE                    =
TABLES
    OTF                         = t_otf
    LINES                       = t_lines
EXCEPTIONS
   ERR_MAX_LINEWIDTH           = 1
   ERR_FORMAT                  = 2
   ERR_CONV_NOT_POSSIBLE       = 3
   ERR_BAD_OTF                 = 4
   OTHERS                      = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'mail id'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    DOCUMENT_DATA              = WA_DOC_CHNG
    PUT_IN_OUTBOX              = 'X'
    COMMIT_WORK                = 'X'
TABLES
    PACKING_LIST               = T_OBJPACK
    OBJECT_HEADER              = WA_OBJHEAD
    CONTENTS_BIN               = T_OBJBIN
    CONTENTS_TXT               = T_OBJTXT
    RECEIVERS                  = T_RECLIST
EXCEPTIONS
    TOO_MANY_RECEIVERS         = 1
    DOCUMENT_NOT_SENT          = 2
    DOCUMENT_TYPE_NOT_EXIST    = 3
    OPERATION_NO_AUTHORIZATION = 4
    PARAMETER_ERROR            = 5
    X_ERROR                    = 6
    ENQUEUE_ERROR              = 7
    OTHERS                     = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
please reward me if helpful.

COMMIT_IN_POSTING error when sending PO as PDF attachment through me23n.

I am sending PO smartform as PDF attachment which is created when print preview option is selected in ME23n .
Problem is when i use
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
If I am using COMMIT_WORK = 'X' in this function module. then am able to send the mail ,but at the same time am not able to save any new PO in ME21N.
Iam getting error COMMIT_IN_POSTING.
IF I comment COMMIT_WORK = 'X'
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
then am able to save the new PO in ME21N but unable to send attachment as pdf.
Plzz provide me solution for the above,,...!
I have done changes in standard PO driver program from which am calling the samrtform using entry_enu form and with a nace configuration changes.Iam able to creat smartform output and also PDF file of smart form the only problem is sending mail while using 'SO_NEW_DOCUMENT_ATT_SEND_API1 and commit_work parameter.

Moderator message - Duplicate post locked
Rob

Is anyone having problems using pages app with iPad mini?

I have to use a template report for my job- which other people with normal sized iPads also use- I use pages to convert the word doc - which contains writing and boxes - I complete the report and send it back to work, when they open it all the writing can't be seen down the right hand side, so I'm having to write three words per line in each box so they can read it when they open it, this is not ideal and wondered if its the iPad mini that can't cope ? Wondering weather to get the standard size iPad although I don't really want to do that.
I also need a way of password protecting my work can anyone help ?
Thanks

I have an HP Scanjet 8390 with the same problem ($1600 new when I bought it). Using the "HP Scan.app", I am able to scan but not save - something about a read only file.
The HP Scanjet 8390 is a business class **DUPLEX document scanner built like a tank, critical to my business (and personal). ie. I scan 100's of duplex pages a day for the last 6 years with no problems. It has a 14" glass for legal documents, 48-bit, +programmable hard buttons to scan and copy, or scan and print, OCR...
I called 1-800-633-3600.. HP told me they do not support legacy products, have no intention of updating the drivers for legacy products and suggested I buy a new scanner (even though my old scanner works perfectly and is faster and not ).
What is considered a legacy product? 1 year? 2 years? Am I to buy a new ($1000) scanner every 1-2 years? What benefit do I get from a new equivalent scanner?

Sending smartform as pdf attachment through mail

Dear All,
Can anyone suggest me sample code of how an sap smartform output is sent as pdf attachment to a receipients email address?
Thanks
M A

hi,
chk this sample code.
* Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      i_tline TYPE TABLE OF tline WITH HEADER LINE,
      i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
      i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
* Objects to send mail.
      i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
* Work Area declarations
      wa_objhead TYPE soli_tab,
      w_ctrlop TYPE ssfctrlop,
      w_compop TYPE ssfcompop,
      w_return TYPE ssfcrescl,
      wa_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      wa_buffer TYPE string,"To convert from 132 to 255
* Variables declarations
      v_form_name TYPE rs38l_fnam,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
     exporting
          formname           = 'ZZZ_TEST1'
     importing
          fm_name            = v_form_name
     exceptions
          no_form            = 1
          no_function_module = 2
          others             = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
     EXPORTING
          control_parameters = w_ctrlop
          output_options     = w_compop
          user_settings      = 'X'
     IMPORTING
          job_output_info    = w_return
     EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
       EXPORTING
            format                = 'PDF'
            max_linewidth         = 132
       IMPORTING
            bin_filesize          = v_len_in
       TABLES
            otf                   = i_otf
            lines                 = i_tline
       EXCEPTIONS
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            others                = 4.
*   Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
    translate i_tline using '~'.
    concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
    i_record = wa_buffer.
    append i_record.
    shift wa_buffer left by 255 places.
    if wa_buffer is initial.
      exit.
    endif.
enddo.
* Attachment
refresh:
    i_reclist,
    i_objtxt,
    i_objbin,
    i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
******* Create Message Body
**** Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text
* wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment
* (pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
* Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              document_data              = wa_doc_chng
              put_in_outbox              = 'X'
         TABLES
              packing_list               = i_objpack
              object_header              = wa_objhead
              CONTENTS_BIN               = i_objbin
              contents_txt               = i_objtxt
              receivers                  = i_reclist
         EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              others                     = 8.
Regards
Anver

Sending smartforms as PDF attachement via e mail

Hello all:
I have configured PPF actions to send smartforms as PDF attchment via e mail it works fine in one client.
But when I copied the transport to another client, the entries in field 'Recipient' in the configuration step 'Define Conditions and Output Parameters for Comm. of Cust.Shipm. & Cust.Dcl' are not copied to the new client. I had maintained the name of the inbox folder that has e mail addresses in this field. Any one has a similar issue ? Or is this similar to the number ranges and not transportable and we have to maintain them in every client. Any insight into this very much appreciated.

Hello:
If you want to send the smartform as a PDF attachment, configure your PPF action as described below:
Step 1: Define Techn. Medium for Msgs (PPF Actions) f. Cust. Shipm. and Cust. Decl.
            In the action definition, choose processing type as 'External Communication'
                                                         form type: 'Smart Forms'
                                                         format: /SAPSLL/FORM_PROC
                                                         personalization type: 2 object specific....
            Make this action definition partner function dependent and create a Z partner function. Maintain that
            partner function in this definition.
Step 2: Define Conditions and Output Parameters for Comm. of Cust.Shipm. & Cust.Dcl
            Select Communication Method: Internet Mail
                      Mail Settings: send status: 3
Configure the reamaining PFF actions as usual.
This will work if that configured partner function is maintained in the customs declaration. And for that business partner, maintain the e mail address in the address dependent section via txn BP.

How do I put a capital letter in the middle of a word using Pages on an iPad?

I have a English last name that has "Mc" as the first two letters, Traditionally, the third letter is capitalised. This 4th gen iPad running Pages 1.71 won't let me do it. i've tried puting it in as a shortcut - but to no avail. Any suggestions?

that feature is gone. Continue to use Pages 4.3, which should still be in an iWorks folder within your Applications folder, and let Apple know what you think:
http://www.apple.com/feedback/pages.html
Also review and rate on the App Store.

How to make a rubber effect like when you swipe between apps using 4 fingers on iPad ?

Hey guys,
So how to make a rubber effect like when you swipe between apps (first or last app) using 4 fingers on iPad iOS7 ? Any examples ?
Thanks!
Ivan

Please do not double post the same question.
Just like I said before. Animate X scale and position. Set the anchor point of the left image to the left side. You can then use an expression or just generate keyframes for scale. When you flip to the next screen then animate position. Easy basic animation except for the bounce. Key framing the bounce so that it looks natural takes a lot of experience or an expression.
Google bounce expression after effects and find this. http://www.motion-graphics-exchange.com/after-effects/Wiggle-rubber-bounce-throw-inertia-e xpressions/4ad0f32a944ad
There are a bunch of other solutions.
There is no single click solution to this problem and it is not an effect, it is an animation.

When I send a mail using pages on my iPad, it sends as a PDF(attachment).

Similar Messages

Maybe you are looking for