When I send to color the project setting dont match the ones on fcp

Im sending a project from fcp to color, the project is 1440x1080 when it opens in color it says its 1920x1080 and doesn't let me change it.
I also cant seem to access the preferences for color.
Can anyone offer some suggestions?

Three issues in one...
COLOR only works in square pixels, so if its a 16x9 project, it will scale everything accordingly: 1440x1080 will go to 1920x1080. That isn't negotiable. As I recall, 960x720 DVCProHD goes out at 1280x720 even if you choose "Original Format", and if you're working in a codec that COLOR doesn't support for export in other than Uncompressed or ProRes QT, then there is only one way through that door.
The only "preferences" you have available are the ones in the Setup Room -- what are you trying to change? The Project Settings?
If you're sending a single layer sequence and multiple layers result, there is likely a nested sequence or a remnant of one on that sequence. COLOR will attempt to open the sequence and rebuild it -- this is usually where a project corrupts very badly.
jPo

Similar Messages

All the album covers dont match the songs playing

When I went to update my ipod, the album covers no longer match the song. HELP!!

Since no one seems to have answered ...
I get the impression that iTunes essentials are just lists of tracks.
iTunes uses the Artist and album information to determine the artwork so it should pick up the appropriate artwork for each track if the album and artist are correct.
Certainly this is the case for an album consisting of tracks from several albums - if the artist and album name are set to the original album.

I first thought the Ipad would be used by my wife so I set up her email account. She didn't use it that much so I did and set up my accounts and took her off. Now when I send an email it shows her address as the sending party - how do I fix this

I first thought the Ipad would be used by my wife so I set up her email account. She didn't use it that much so I did and set up my accounts and took her off. Now when I send an email it shows her address as the sending party (some of the time and I don't know why only some of the time) - how do I fix this

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Also... Create your Own Apple ID for Your iPhone...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
And... Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
See Here for > How to Use Multiple iDevices with One Computer
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Myself and my partner had a iphones. Since the recent software update he now randomly receives texts from my contacts and also when im sending texts. Is this because we share the same apple id. This didnt happen before the software update.

myself and my partner had a iphones. Since the recent software update he now randomly receives texts from my contacts and also when im sending texts. Is this because we share the same apple id. This didnt happen before the software update.

You can both share the same Apple ID for purchases but i suggest one of you use another email for the use of iMessage, Facetime etc.
It is easy to do, the easiest way is to set up an iCloud email directly from your iPhone. Once set up one of you will use this for iCloud services but both still use the existing Apple ID to make purchases.

FCP X deleted about 2/3 of events to a project and the project. I uploaded the project to vimeo from FCP X, and the next day when I tried to use FCPX, they were gone, the events are gone from fcp and my ext hd, the project is still on the ext hd.

FCP X deleted about 2/3 of events to a project and the project. I uploaded the project to vimeo from FCP X, and the next day when I tried to use FCPX, they were gone, the events are gone from fcp and my ext hd, the project is still on the ext hd, but it won't recognize in FCP X even though my ext HD shows in the project tab. anybody any clue how to bring it back?

Thanks for the reply Andy.
No, I don't have identical projects on a second drive, only saving to the movies folder on internal HD. The files and media save there fine, but fcp doesn't seem to recognise them the next day, just opens with one new untitled event and no projects.
I have tried saving to en external HD tonight and will see if the problem happens again with this set up when I restart tomorrow.
But I should be able to save to internal HD, so something is going wrong...
Peter

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?

"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.

When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?

When I send an email with Mail, I often confuse the account which I'm using. The result is that I send a message with the wrong account! Is there a way to avoid this (for example a reminder before the email is sent)?

Hi, thanks for the answer, I did that already. Unfortunatly this doesn't help me at all, as I often forget to check the menu. For me composing the message is writing the text, the subject, the person to who is addressed and than press "send".
I often forget to check the "from", and this is a problem because the software select itself one of the accounts.
Isn't there a way at least to put as a default a blank field instead of one of the accounts? or an account which doesn't work so if I forget to specify the "from" I will be rnotofied that the message can't be sent.
I guess this could be a rather common problem for many people!
Thanks
Sergio

When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all.

When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.

Hey Grupo Castillo,
Thanks for the question. You can actually configure this behavior from Mail preferences:
1. Choose Preferences from the Mail menu.
2. Click Composing.
3. Deselect the checkbox for "When sending to a group, show all member addresses".
When you send an email to the group, only the groups name will be seen.
Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
http://support.apple.com/kb/TA21082
Thanks,
Matt M.

When opening iTunes, I get the following error message: the registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.

When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

When I send an email with a photoshop file attached, the recipient receives it "flattened". How do I change this?

when I send an email with a photoshop file attached, the recipient receives it "flattened". How do I change this?

I've sent psd files to various people without issues, however you might want to try something like www.filedropper.com to make sure it's not that they can't open your version of psd file.
You may also want to zip the file using the built in archiving software, simply right click (or control click) the file and choose Compress ...., then you can email it to the person as a compressed archive. That should preserve all the aspects of the file properly without any modifications.

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

When I try to open my project in encore through the dynamic link it says folder cant be found

When I try to open my project in encore through the dynamic link it says folder can't be found

Do it manually to see if Encore works... export MPEG2-DVD from PPro (if for a DVD, or appropriate assets for HiDef) and then import the 2 (audio and video) files into Encore for authoring
Run as Administrator http://forums.adobe.com/thread/969395 fixes some problems
Specific to CS4, you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download
Dynamic Link Problems... and a possible fix http://forums.adobe.com/thread/1325281

When I send to color the project setting dont match the ones on fcp

Similar Messages

Maybe you are looking for