When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?

When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?

paul71054 wrote:
... Any ideas?
add a few seconds black to your project.
Try again.
could be some really weird codec problem, with 'cut' GOPs', .. somethin'...

Similar Messages

  • Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

  • My Iphone4 went dead and won't turn back on inspite of charging it for whole night. Any idea?

    My Iphone4 went dead and won't turn back on inspite of charging it for whole night. Any idea?

    Try the suggestions in this Apple document -> Troubleshooting iPhone hardware
    Will not turn on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions.   If it does not function, inspect it for signs of damage.   If the button is damaged or is not functioning when pressed, seek service.
    Check    if the Liquid Contact Indicator (LCI) in the headset jack or dock connector is activated or there are signs of corrosion or debris. Learn more about LCIs.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least 15 minutes.
    After at least 15 minutes, if:   
    The home screen appears: The iPhone should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has  charged for at least 20 minutes: See   "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    If something other than the Home screen or Low Battery screen appears on the display, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, try resetting it while connected to the iPhone USB power adapter. To reset, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or the battery symbol appears.   
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Restore the iPhone.   Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    If that doesn't work, have a Genius take a look at it.

  • HT1926 I've successfully updated itunes and quicktime on windows XP but itunes won't run properly, the video tutorial loses audio after about 1-2 minutes and when I plug in my iphone 4s to sync the whole thing freezes, any ideas?

    Hi everyone,
    was prompted to upgrade itunes on my PC and also upgrade the software on my iphone 4s.Went through as usual but took 3 goes to get a successful upgrade of itunes on the PC. Then was prompted to update quick time, this was done successfully.
    Thought I'd look at the tutorial video for itunes - the sound went off 11/2 minutes into it, then I couldn't stop it. I had a quick look around itunes and decided to sync my phone. The program recognised the phone then everything froze. Windows message for a non responding program came up and had to pull out of the program. So far after several hours I have not been able to get beyond stage 2 of 7 of syncing the phone; it keeps freezing up at different stages.
    Any ideas?? I haven't had this kind of trouble before with any other version of itunes.
    Cheers

    Still nothing? Wow... maybe the quality of this discussion board really has gone down. Dissappointed.

  • My Iphone 3 got water damaged in June so i have just got an Iphone 4s. When i have turned on Icloud etc it has updated all my notes from my previous phone on to the new one as it has also done with my contacts, but it hasnt done the photo's. Any ideas?

    I have been into Icloud and under 'Storage & Backup' and 'Manage Storage', I can see that my last phone was backed up a day before it was broken. I just cant find the option to transfer that data such as all my pictures and videos onto my new phone. My Notes and contacts have just transferred automatically and strangely, my old photo's that were taken and assigned to certain contacts are now assigned to my new phone as was, but they dont appear in my photo library anywhere. What do I need to do? 

    Hello again. Just to let you know I have solved the problem. Backed up my new phone. Then wiped all settings and everything off it to start again. When it relaunches it gives you the option to download from Icloud and you can pick from which back-up date you want to download it from. Picked the one from the day before it got trashed and HEY PRESTO, we have all the pictures and videos back!!!     Iphone 0 - 1 Voodooboy78
    I'm sure people will look at this and be like duhhhhhh but to me it is a VICTORY over technology!!! Peace

  • Since upgrading to Mavericks, I can no longer share my documents via email.  It never gets to the mail page. Any ideas?

    Once I upgrades to Mavericks, I first had trouble viewing my old documents saved in iCloud.  Apple Support phone call solved this.  Now I notice I cannot share any of my documents/pages via email.  It never gets past the "next" page for sharing via email.  Anyone with same problem?

    I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
    It still works with the iPhone 5
    Thank you

  • I have set up all my mac devices to sync with iCloud and all work except for email. When I delete on one device, the delete doesn't occur on the other devices.

    I have set up all my mac devices to sync with iCloud and all applications work except for email. Incoming messages appear on all devices but when I delete on one device, the delete doesn't occur on the other devices.

    Thank you for your interest. I use apple mail to access my two accounts -I guess they are 3rd party accounts. One is a gmail acount and the other is a bigpond account. I admit to a lack of a high level of literacy when it comes to the language around all of this. For example, I am aware that I have an iCloud email account as I managed to set it up, but don't really understand the purpose of it as the last thing I need is yet another email account to oversee.

  • Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

    Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

    I have one of these http://store.apple.com/us/personalize/itunes?product=M9949
    but the credit on it is 30 chf....i try to reddem into itunes and after all the steps i recive a message that says"the serial code is not good...." i don t know why say this....

  • I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1.  Everything works fine if I use VLC Media Player. Does anyone have any idea why?

    I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1.  Everything works fine if I use VLC Media Player. Does anyone have any idea why?

    My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
    The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
    Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

  • Delayed response of when moving objects in diagram and panel, happend in LV 6, only for vi's compiled from previous versions. any suggestions?

    When I using the mouse to select portion of the diagram or the panel, or when I moving objects- I found that in all the vi's that I compiled from former versions of labview- there is a delay of close to a second to the actual selection or movement of the item. This happens in 2 machines out of 5 that I tested it, and it happened both in windows 2000 and in windows 98. any suggestions?

    Sometimes a video driver issue. Update your video driver.
    Or turn down the video driver hardware acceleration. Right-click an
    empty area of the desktop, choose the Settings tab, choose the Advanced
    button.
    The location of this differs in different versions of Windows.
    Win2000: go to Troubleshooting, and turn down the slider for hardware
    acceleration.
    Win98: I think it's on another tab.
    Mark
    ilan wrote:
    >
    > Delayed response of when moving objects in diagram and panel, happend
    > in LV 6, only for vi's compiled from previous versions. any
    > suggestions?
    >
    > When I using the mouse to select portion of the diagram or the panel,
    > or when I moving objects- I found that in all the vi's that I compiled
    > from former versions of labview- there is a delay
    of close to a second
    > to the actual selection or movement of the item. This happens in 2
    > machines out of 5 that I tested it, and it happened both in windows
    > 2000 and in windows 98. any suggestions?

  • Nano3rdgen Copying playlist from itunes to ipod and it says it can't copy certain songs to ipod cos of file type.These problem songs all from same album, all ACC file type and all copied fine when I copied the album itself few weeks ago-help!

    When copying playlist from itunes to nano3rd message comes saying 9 of songs can't be copied to ipod cos of file type. These 9 are all from same album, all ACC and all copied fine when I copied the album itselm some weeks ago.  Rest of playlist was ACC too.  P.S. album is a CD-R copied version-is this an issue? HELP I AM DESPAIRING!

    I never laughed in all my life. Here I was, inserting the cd Dance with Me, thinking it's not going to copy the whole thing. yeah, right.
    Sure, it prompted me, Do I want to replace the songs, so of course I said "no, don't replace the songs". and guess what it did. It copied the whole cd (at least I got my two songs).
    I went into the itunes library, and sure enough, all the songs were there twice. So what did my intelligent brain think of? I just unchecked the doubled songs and stuck my ipod into my computer and it synched up and I got what I wanted.
    Now what did I do wrong when it prompted me. I clicked on "don't replace" and it replaced them anyway.
    Am I dumb? or is itunes stupid?
    thanks, Melody

  • Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I work for a retailer who sends out e-receipts as pdf attachements.  When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment.  Any ideas?

    i work for a retailer who sends out e-receipts as pdf attachements.  When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment.  Any ideas?

    i have scrolled left, right, up and down on iphone4, iphone5 and ipad and the attachment simply does not exist.  It has to be something with the apple mail client setup because for any mail client, if they go to the webemail thru safari, the attachment is there and it can be viewed without issue.
    I know there are plenty of people out there with this issue with the mail clients set up that you access thru the email icon on the iphone and ipad but i cannot find anyone with a resolution.  I cannot find any settings in the mail client setup that has anything to do with attachments or for what attachments can or cannot be read or seen.
    Hopefully someone out there has figured something out because this is an odd one.

  • I have Keynote 6.2 and when my Mac Pro is hooked to a projector I cannot get the presenter notes to show on the computer screen and not on the projected screen. Any ideas?

    I have Keynote 6.2 and when my MacPro is hooked to a projector with a slide presentation I cannot see my presentation notes on the computer screen and not on the projected screen. Any ideas?

    Somethings obviously gone wrong with your installation of Keynote.
    Try this repair for Keynote 6.2,  ensure you complete all the tasks and in the order shown:
    1  delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
    2  empty the trash:  Finder > Empty Trash
    3  Shut down your Mac, wait 30 seconds, then hold down the Shift key while pressing the power button
    When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
    If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
    4   Let the Mac fully boot up, it will take longer as the OS is repairing the drive
    5  when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
    6  when complete, restart the Mac normally, Apple menu > Restart
    7  install Keynote from the Mac App Store
    let us know if this helped

  • I have uninstalled and reinstalled iTunes multiple times.  When I connect my iPod Classic I get the following message:  The software for this iPod is not installed correctly.  Please reinstall iTunes to install the required software.  Any ideas?

    I have uninstalled and reinstalled iTunes multiple times.  When I connect my iPod Classic I get the following message:  The software for this iPod is not installed correctly.  Please reinstall iTunes to install the required software.  Any ideas?

    Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

Maybe you are looking for