When I "share" to DVD the file is transcoded.  When it reaches 66% it starts to "finishing", but the process stops and does not proceed beyond 66%.  When I stop the sharing process I receive the following message "the share operation dvd has failed".

When I "share: to DVD the file is transcoded.  When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish.  The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
Is this a problem with FCPX or Create DVD?  How can this problem be resolved?

The handshake between FCP and a hidden app called Create Disk wasn't completed.
Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
Russ

Similar Messages

  • Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!!

    Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!! Anyone with same problems? What can i do now?

    What if they say i scratched it by dropping or something (which i obviously dint)? will they still replace it?
    It even has the plastic on it yet..!!

  • I can not register in my mind the method of payment my pay pal or credit card. I live in Puerto Rico and does not have to select Puerto Rico

    I can not register in my mind the method of payment my pay pal or credit card. I live in Puerto Rico and does not have to select Puerto Rico

    - See:
    ]iTunes Store: My credit card's security code or zip code does not match my bank's records
    - If still problem contact iTunes by:
    Contact iTunes

  • I updated AVG, and now Firefox's Restore Previous Session is not working properly. I've restarted my computer a few times, and still no restore previous session. I have the button, but it looks different and does not open up the previous session. Help!

    I updated AVG and after that the restore session button for Firefox has not worked. Each time I close and that option becomes available, I am able to click, but it does nothing but blink. Also, it appears different from before.

    Had this trouble myself, just did some research and solved it!
    Go to the '''Help''' menu, go to "'''Troubleshooting Information'''"
    On the new window, click "'''Open Containing folder'''" next to ''Profile Directory'' (This opens the folder on your PC where Mozilla stores some settings, like a tab history)
    In the new Windows Explorer window, Find the file "'''chromeappsstore.sqlite'''"
    You'll want to close Firefox and then '''delete''' that file (don't worry, Firefox will create a new one, and you won't even lose the open tabs)
    Start Firefox again and the button should work!
    (For completeness's sake, the profile folder for windows7 is: C:\Users\Tiberion\AppData\Roaming\Mozilla\Firefox\Profiles\c6xu23fh.default\
    where you replace Tiberion with your own username, and the random characters in the final folder will be different.)

  • After a failed attempt to update ipad through itunes, ipad is frozen black, does not respond and does not show in itunes when connected

    I connected my Ipad to my computer and I started itunes. Ipad needed updating so I proceded. Then there was an error and now ipad is not working at all. I have updated itunes, and restarted the computer, but still, now, itunes does not recognize ipad when connected. What can I do?

    Was it EVER jailbroke?

  • Since the upgrade my iphone periodically will not send iMessages to other iPhones. I am able to receive them and can send from my iPad. When I push send the bar goes 3/4 of the way and the stops and will not send at all

    Since the upgrade my phone will not send iMessage to other iPhones. I can send from my iPad. When I try and send the message sends 3/4 of the way and then stops and does not send at all

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

  • Lick on the icon in appstore which allows to gift an app or copy link , post to facebook etc does not open it stucks.Also same case for itunes and moreover when I play music in iTunes it

    Itunes and appstore problems:
    i have an iPhone 5 whenever I try to click on the icon in appstore which allows to gift an app or copy link , post to facebook etc does not open it stucks.Also same case for itunes and moreover when I play music in iTunes it stops ..start again stops and start again ..stops and does not play..so I  am unable to make gift purchase and listen to the songs..are these bugs or what? help

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • I need to update my phone, but my computer broke, and do not have a new one. I have an Itunes account, can I use someone else computer to go through with the update?  Is there a chance of loosing all my data, ie: music/photos?

    I need to update my phone, but my computer broke, and do not have a new one. can I use someone else computer to go through with the update if i log on with my itunes account or Is there a chance of loosing all my data, ie: music/photos? And if all else fails can i go to the apple store and have them update my phone?

    Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
    Go to a friend, authorize that pc.
    Read this : http://support.apple.com/kb/ht1848
    and this : http://support.apple.com/kb/ht2519
    Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

  • Itunes does not open. When I click on itunes it jumps ones and does not open in macbookpro

    itunes does not open. When I click on itunes it jumps ones and does not open in macbookpro.NEED AN ANSWER NOW!!!

    Hey sebasac,
    Thanks for the question. I understand you are experiencing issues with iTunes on a Mac. Let’s see if we can isolate this issue by starting iTunes in safe mode:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/TS3430
    There are several ways in which an add-on can cause iTunes to act erratically, such as those listed below:
    - Loss of iTunes functionality, such as the Visualizer.
    - Distortion or irregularity in the iTunes interface.
    - Slow performance.
    - iTunes won't open or quits unexpectedly.
    - You see an alert while syncing stating "... cannot be synced. A duplicate file name was specified."
    If you notice any of the above symptoms or other unusual behavior, you can disable any plug-ins not manufactured by Apple by opening iTunes in Safe Mode. This is done by holding down the Option and Command keys (on Mac OS X) or holding down the Shift and Control keys (on Windows) while opening iTunes. If performed correctly, you should see the following dialog before iTunes finishes starting up:
    "iTunes is running in Safe Mode. Visual plug-ins you have installed have been temporarily disabled."
    If the above does not resolve your issue, I’d like to isolate further by testing in another user account:
    Isolating an issue by using another user account
    http://support.apple.com/kb/TS4053
    Symptoms
    When isolating issues and/or troubleshooting software issues in OS X, you might want to use a different user account. Learn how to use this technique to narrow down the cause of an issue.
    Resolution
    The issue at hand may simply be caused by a bad preference setting or user-specific data file. With proper isolation, you can avoid time-consuming and inappropriate troubleshooting methods.
    Thanks,
    Matt M.

  • When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected?  I never got this message before and I have a iPhone and iPad

    When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer?    Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • The share operation youtube has failed

    Hi. I need the help, Im not work long with final cut Pro 10.0.8 b at haw prob lem with share to dvd DL. after share its stop on 49%, and sad
    The share operation youtube has failed   Quick time erroe: 0
    Is any one can help option how to share to DVD  or ?
    Thanks.

    I had this problem and tried evry thing on the thread "Sharing to DVD all my projects stops att 66 % - without error messages." (https://discussions.apple.com/thread/4966745) but the thing that fianlly fixed it for me was your suggestion about kewords - I removed the one keyword I had and the share to DVD finally completed.  Oddly though other projects with the same keyword (which FYI was P2P) all burnt to DVD fine... Anyway thanks canoel!

  • When I attempt to log on to I tunes I get the following message  "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing  This can happen as a result of installing other CD burning software  Please reinstall

    When I attempt to log on to I tunes I get the following message:
    "The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
      This can happen as a result of installing other CD burning software. Please re-install I Tunes."
    To my knowledge no new software has been installed.  I have tried un-installing and re-installing I Tunes but I still
    get the same message.
    Can anyone offer any suggestions?  Do I need to download a new driver?
    Bill Martin

    I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
    Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
    If so, here's the relevant instructions for that step:
    On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
    Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
    Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

  • Cannot open Pages documents that I've worked on.  I open a new document, work on it, then save and close it.  When I try to open the document again, I get the following message: The document "[name]" could not be opened. The file isn't in the correct form

    I cannot open Pages documents that I have worked on and saved.  When I try to reopen Pages documents that I've saved, I get the following
    message:
    "The document “[name of document]” could not be opened. The file isn’t in the correct format.
    The file might be corrupted, truncated, or in an unexpected format."
    I have downloaded the latest update to iWork, but that doesn't help.
    I use Mac OSX 10.6.7
    I am using Pages '09 version 4.0.5 (852)
    If anyone can help, I would greatly appreciate it.
    Best regards,
    New York Mac User

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • I have just clicked on my iTunes desktop icon and got the following message "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Why has this occurred when it working fine?

    I have just clicked on my iTunes desktop icon and got the following message "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Why has this occurred when it working fine? Is it best to update iTunes to 10.2 to attempt to resolve? Initially I got the prompt Quicktime was out of date so I updated that successfully in all programs. I do not want to lose my iTunes library.

    Sorted problem updated and reinsatlled and restarted computer.

  • Download failed and receive the following message: The product distribution file could not be verified. It may be damaged or was not signed.

    download failed due to internet problems. I can't restart the download again and receive the following message: The product distribution file could not be verified. It may be damaged or was not signed. please help thanks

    I went to Purchases and it worked from there having had the same problem you describe.

Maybe you are looking for